SMW-AUTOBLOK EN

IND-CP

High precision self centering and compensating power chuck Ø 500 - 1250 mm

■ Closed center ■ 3 jaws

INCH SERRATION AND MODULE 2

Application/customer benefits • Clamping of large parts • Self centering clamping of workpieces that need to be centered by the jaws • Compensating clamping of shafts held between centers or centered by other means like collet, mandrel or self centering chucks IND-CP Ø 500-800: Master jaws with INCH SERRATION (3/32’’ x 90º) IND-CP Ø 1000-1250: Master jaws with MODULE 2 TONGUE & GROOVE master jaws on request Technical features • Gripping force transmission via wedge hook • Sealed against swarf and chips • Conversion self centering / compensating with an easy rotation of internal ring • Rotation of the conversion ring with chuck mounted on machine Standard equipment 3-jaw chuck / 1 set T-nuts with screws 1 set soft top jaws with bolts Center point on request Ordering example 3-jaw chuck IND-CP 630 / A15

Actual gripping force diagram

The data in the diagram refer to 3-jaw chucks, newly maintained according to their service manuals using SMW-AUTOBLOK K67 grease. The static and dynamic gripping forces have been measured using standard soft top jaws, placed in a position not exceeding the outer diameter of the chuck.

180 150 120 210 240 270 350 300 400

1250

1000

Safety advice / danger of damage: When using taller / heavier jaws and / or clamping on a bigger diameter reduce draw pull / rotating speed accordingly.

800

630

500

F G

90 60 30

F

0

400

800

1200

1600

Speed (r.p.m.)

Easy conversion from compensating to self-centering

Technical data

IND-CP 500 IND-CP 630 IND-CP 800 IND-CP 1000 IND-CP 1250 3 3 3 3 3 7.5 10 10 15 15 28 38 38 57 57 ±2.5 ±2.5 ±2.5 ±3 ±3 100 100 100 150 150 240 240 240 320 320 1500 1000 900 630 500 130 240 320 710 800 4.5 11 24 50 154 SIN-S 150 / 175 / 200

SMW-AUTOBLOK Type Number of jaws Radial jaw stroke Axial piston stroke Compensation Max. draw pull* Max. gripping force*

mm mm mm

kN kN

Max. speed

r.p.m.

Weight (without top jaws)

kg

Moment of inertia

kg·m 2 Type

Recommended actuating cylinders

77995038

77996316

77998031

77999023

77999213

Id.-No. IND-CP (Center mounting)

* For internal clamping reduce the draw pull by 30%.

84 SMW-AUTOBLOK

Made with FlippingBook Publishing Software