Soft99® Car Care and Maintenance 2019 Catalog

DIRECTIONS FOR USE 使用方法

99

2. Make sure that the glass or plastic surface is dry before application. 3. Take off the cap and apply the product directly on the whole surface desired. 4. Immediately wipe off with the included microfiber cloth. GLACO “W” JET STRONG In rain: 1. Spray the product onto the windshield for 3 sec- onds, with the wipers turned on. In normal conditions: 1. Pre- pare the glass surfaces by washing them thoroughly with pH neutral shampoo, drying and decontaminating it using a clay bar, cleaner or other products. Glaco products produce best results if the glass is prepared using Glass Compound Z or cleaning compounds from the Glaco series. 2. Spray the prod- uct onto the windshield, then immediately wipe it off with a slightly wet microfiber. GLACO MIRROR COAT ZERO 1. Prepare the mirrors surface by washing them thoroughly with pH neutral shampoo, drying and decontaminating it using a clay bar, cleaner or other products. Glaco products produce best results if the glass is prepared using Glass Compound Z or cleaning compounds from the Glaco series. 2. Spray evenly about 15 cm away from the side mirror. We recommend to separate the sprayed surface in order not to get the fluid on other parts of the vehicle. 3. Dry completely for 1. 5 hours and under no circumstance touch the surface. GLACO DE CLEANER 1. Shake the bottle well and turn on the nozzle. 2. Spray about 15 cm away from the cleaned surface and wipe off with a clean microfiber cloth. If using inside, spraying onto the cloth is rec- ommended. GLACO DEICER 1. If there is a lot of snow on the surface, remove it in advance. 2. Spray about 15 cm away from the cleaned surface. 3. Turn on the wipers when the snow and ice starts to melt. GLACO GLASS COMPOUND ROLL ON 1. Prepare the glass surfaces by washing them thoroughly with pH neutral shampoo and drying. 2. Shake the bottle well and remove the plastic seal. 3. Polish the glass until the surface stops repelling the liquid when the bottle is pressed. 4. Rinse with water after the process is completed.

Made with FlippingBook Online newsletter