2024 ARAI Directory

Priority for Protection Helmets, made by the dedicated hands of those who work at Arai, have shown examples of supreme protection for decades. The numerous improvements by their experienced hands, and personal desire to further the protection of riders’ heads, are among the many unique reasons Arai helmets perform the way they do. From our very first helmet, to those we make today, rider protection remains our first priority and we at Arai shall never forget the value of what we have been seeking to protect is priceless. This is Arai. www.AraiAmericas.com

03 The Arai Difference 04 Glancing Off 08 Shape Matters 09 The Arai Fit 09 Interior Lining/Cheek Pad Fitment

PRIORITY FOR PROTECTION

10 Corsair ® -X 18 RC Carbon 19 DF-X2 20 Quantum ® -X 24 Signet ® -X 28 Contour ® -X 32 Regent ® -X 38 Classic ® -V 40 XD-5 46 VX-PRO ® 4

Helmets, made by the dedicated hands of those who work at Arai, have shown examples of supreme protection for decades. The numerous improvements by their experienced hands, and personal desire to further the protection of riders’ heads, are among the many unique reasons Arai helmets perform the way they do. From our very first helmet to those we make today, rider protection remains our first priority, and we at Arai shall never forget the value of what we have been seeking to protect is priceless.

54 Models at a Glance 55 Warranty / Warnings 56 Shield Systemss

projections may conflict with the basic concept for the shell surface to be round and smooth for “Glancing Off'', in order to satisfy both, Arai has arrived at the following solution. Arai does provide ventilation and stability, without compromising the round, smooth and strong shell needed to deal with an impact. The projections that Arai utilize are not integral to the shell. They are designed and mounted to detach when subjected to forces beyond normal use.

The Value of Arai Video Series: From the very beginning helmets have been much more than just a business for Arai. Started from a need for self-protection, evolving into a pursuit of always improving, even if only by small increments, the accumulation of many such small improvements over time can show remarkable results, even beyond our expectations. Through Arai’s experience, the configuration of the Arai helmet

shell has evolved to allow the shell to slide over obstacles that Arai refers to as “Glancing Off". This is why Arai believes that a shell that is involved in an impact should be round, smooth, and strong. At the same time, it is also important to manage airflow for ventilation, stability, and to enhance the rider’s endurance and concentration. This requires some projections on the shell of the helmet. While these

Michio Arai Owner and CEO, Arai Helmet, LTD.

Based on over 60 years of experience and achievements, Arai shells not only protect the head in a crash, but also contribute to the comfort and concentration of street riders and racers alike, with a legacy of world championships

spanning nearly four decades. Watch these videos on the Arai YouTube channel: https://www.youtube.com/ AraiHelmetAmericas

02 |

www.araiamericas.com | 03

How does a Helmet Protect Your Head? HEAD PROTECTION CAN BE CALLED MANAGING IMPACT ENERGY. EXCEPT MANAGING THAT ENERGY IS NOT JUST ABSORBING IT.

GLANCING OFF

17 mph

GLANCING OFF WORKS TOGETHER WITH ENERGY ABSORPTION INVISIBLE TO YOUR EYES .

for it. There is a test for shell strength to resist penetration, though because it’s difficult to put numbers to the shell form and such for glancing off, there remains no definition. Any helmet makes use of glancing off, but due to the difficulty in numerically capturing each helmet’s difference in ability, there are many cases where safety standards simply don’t define glancing off. In addition to passing standards, Arai makes continual efforts to improve our helmets’ glancing off ability and pursue gains in head protection.

When we talk about ‘Impact absorption ability’ there will be a limit regardless of any manufacturing technique employed, because of the limited amount of space between the shell and rider’s head necessary to manage impact energy (see below “The Limit of Absorption Ability”). And on a motorcycle, we have to prepare for impacts that far exceed our imagination. So it follows that glancing off is critical for supporting that. Arai’s helmet exhibits results due to its strong shell combined with its round smooth surface and achieves the important goal of not letting energy into the helmet. However, helmet standards place their emphasis on impact absorption and do not show anything about glancing off. Glancing off is the synergy of various elements working together, and there is no set way to impact a helmet to test

That is ‘glancing off’. Many people probably don’t even realize this, but at the moment a helmet is impacted, if struck off center it can slide on the crash surface, minimizing the impact energy that might otherwise be transferred to the rider’s head. Therefore, if not directed toward the center of the helmet, the head inside can be protected, even with high energy levels and the liner’s limited energy absorption ability. Even in extreme crashes we’ve witnessed ‘glancing off’ and ‘energy absorption’ as two halves of energy management that work together to increase the chances of head protection. This holds true for any kind of helmet. Here is the moment of impact. The rider tenses up, and the helmet contacts the ground. You can imagine what the helmet has to do next.

In the event of an impact, energy is created, and the role of a helmet is to ‘appropriately manage the impact energy’ to protect the rider’s head. That energy management is generally achieved by ‘absorption’ of the impact energy around the head, thus protecting it. The outer shell deforms and the cells of the inner EPS liner crush, and that destruction manages impact energy by converting it into work. However, the truth is even the best helmet has limits to how much energy it can manage. On the other hand, the helmet isn’t only absorbing energy, but rather in a large crash when the rider’s head is repeatedly protected by the helmet, we understand that it’s working to manage impact energy in another important way.

17 mph

As for the force involved, if you convert the force from the helmet drop test of the strictest helmet standard in the world, it amounts to merely 17 mph.

Impact Energy

All helmets protect the rider’s head through both glancing off and energy absorption.

THE LIMIT OF ABSORPTION ABILITY

Buffer Zone II Size of the helmet

The amount of energy in a crash can be expressed as distance and force, where distance is the physical space between the helmet shell surface and the rider’s head, or in other words the helmet size. If you make the helmet user- friendly, there will be a limit to its size. Regardless of construction or material employed, there’s still a limit to the space available in a helmet.

MOVING FORWARD

Illustration

AIMING TO BE THE BEST IN THE WORLD

helmet as a component above all others and continue to employ it in our approach. Head protection is the foundation of our belief in being the best in the world and we pursue the value of both ‘glancing off‘ and ‘impact absorption’ equally. This is the difference of Arai.

When it comes to proficiency in head protection, Arai has the goal of making a helmet superior to all others and continues to make our helmets this way today. We have seen this confirmed in many of our rider crashes over several decades, and we pursue gains in protection even if just a little. Because we come from this background, we’ve come to notice the importance of the smoothness of the

01 HELMET SCARS FROM IMPACTS Impact absorption testing is representative in

SCAN HERE to watch crash video

helmet standards testing. It numerically measures the impact when a helmet collides with an obstacle

ENERGY ABSORPTION

GLANCING OFF

straight on. Diagonal scars are left on the

‘Energy Absorption’ and ‘glancing off’ are two wheels that can do the job of preserving balance that can work together without bias or offset.

Right: Impact scars from drop test (hemisphere anvil)

helmet where it received a perpendicular impact. On the other hand, impacts can be received from different angles and the scars flow horizontally from the impact point. *See riding impact case examples.

www.araiamericas.com | 05

04 |

SEEKING VARIOUS IMPROVEMENTS EVERY DAY: INTRODUCING ONE PART OF THE CHALLENGE The Never-Ending Evolution of Glancing Off

CONTINUALLY SEEKING THE STRONGEST MATERIALS AND BEST TECHNIQUES AT THE FOREFRONT OF TECHNOLOGY

Shell strength is very important for enhancing ‘glancing off’. In an actual crash, if the shell deforms or is completely destroyed it can no longer slide and will stop and catch on that point. A helmet that can’t slide can’t maintain its ‘glancing off’ ability and that impact energy can reach the rider’s head. Since we’ve decided on being the number one helmet in the world for protection, we’ve pursued shell strength as well as weight reduction by accumulating improvements that embody the lifeblood of Arai. This evolved into the development of the cLc shell process (complex laminate construction) which encompasses both strength and lightness. Although the cost of the material utilized is 6 times higher than conventional fiberglass, Arai exploits its use for a stronger and lighter helmet. To resist cracks from spreading to the helmet’s edge, the critical edges of the shell have a Super Fiber Belt which reinforces these areas like the bands of a barrel. The resin blend as well is evolved through our obsession with strength and weight reduction as we continue to accumulate various improvements.

Glancing off cannot be adequately quantified as a basis of head protection. In actual crashes, an impact can come from any angle at any speed and cannot be prepared for. Also, the exact speed and angle of an impact cannot be replicated 100%. So as for the development of ‘glancing off’, there’s nothing that can be done except to accumulate improvements that we think we should do through experimentation and small adjustments to combat every possibility.

Between the high strength fibers, special lightweight elastic fibers are sandwiched between, which is the Complex Laminate Construction (cLc). It offers a 20% weight reduction compared to making it with just all the same fiber.

Strength SEEKING VARIOUS IMPROVEMENTS

The Peripheral Belt made of Super Fiber reinforces the helmet like the bands of a barrel for better protection. This special belt resists the spreading of cracks that form when the helmet receives a large impact and improves glancing off ability.

The whole helmet has evolved to receive impact energy with its round surface to address obstacles, and reduce flat facets in the shell. From the scars left by actual rider impacts, we can gather that the helmet was able to slide past obstacles and not catch or snag because of its smooth surface. In other words, we surmise they exhibited ‘glancing off’ properties. So, the shape of Arai helmets will be round and smooth to the very end. We have kept the same basic shape since the beginning, and think it alleviates impact energy more so than a shell with an exaggerated shape with hard edges that may catch. Our helmets evolved from a cannonball shape when first introduced, into an egg shape today, to better blend the entire outer surface more smoothly. The current shape of an egg is a simple sphere evolved in nature for survival. Arai also evolved towards the egg shape with the notion to protect the rider’s head as much as possible from impacts that might exceed expectations.

FORM

FOR MANY YEARS WE’VE SEEN OUR LINER’S PERFORMANCE TESTED

Even the best ‘glancing off’ ability alone won’t protect the rider’s head. ‘Impact absorption ability’ is necessary to pass even the strictest helmet standard in the world. In the impact absorption ability test, the shell surface deforms when it receives an impact with the helmet hitting obstacles of certain angles and shapes. If the impact surface is narrow, concentrating the impact energy, the EPS liner must naturally be thicker. However, while that makes it easier to pass helmet standards, making the EPS liner thicker only in the necessary places ends up distorting the helmet shape away from ‘round and smooth’. It doesn’t maintain a form ideal for making the most of ‘glancing off’. Arai’s proprietary 1-piece multi-density EPS liner has finely-tuned sections with various densities. It can make the most of its ‘glancing off’ ability because the EPS density varies according to the corresponding shell surface, allowing the shell to remain ‘round and smooth’. This 1-piece multi- density liner is indispensable for improved results in Arai’s strength of the shell shape pursuing ‘glancing off’ performance.

The head form shape used in helmet testing is somewhat square, so the ‘four corners’ get tight inside the helmet, and we can see a tendency to make the shell square too.

THE EVOLUTION OF FORM ADVANCES OVER TIME

R75

The aero parts and vents that keep the rider comfortable break off in an impact by design. Our helmets are designed to avoid protrusions in the shell. They also have a continuous round and smooth spherical form maintaining a radius of no less than

PERFORMANCE SEEKING VARIOUS IMPROVEMENTS

75mm, which we call R75, in the head protection area of the helmet according to Arai’s in-house criteria.

Arai’s proprietary 1PMDL (one piece multi- density liner) is the only one of its kind in the world and offers incredible protection by being fine-tuned to each shell size, in each model and in each head size, with varying EPS densities.

06 |

www.araiamericas.com | 07

*The convex curved surface of the shell has a continuous radius of 75mm or more across its curvature.

SHAPE MATTERS

easy as one. two. three.

THE ARAI FIT

1. MEASURE Have the circumference of your head measured to get an idea of where to start. The image here shows the proper placement of a measuring tape to get the most accurate measurement.

THE PROPER CROWN FIT The interior must fit snugly all around the crown of your head. You should feel a firm, even pressure at all the contact points around the interior perimeter, with no tight pressure points that could become uncomfortable over time. The perimeter pads should be supporting most of the helmet weight, with the top crown pad touching the top of your head and supporting only some of the helmet weight. THE PERFECT FIT Over the last several years, we measured the head shapes of thousands of consumers across the U.S., providing us with the first hand information that led to the development of our latest Long Oval (L/O) helmet, the Signet-X. The Quantum-X is the Round Oval (R/O) counterpart to the Signet-X, and all other models have the Intermediate Oval (I/O) head shape, which make up our three fit packages. Head shape is vital for proper fit in addition to helmet size. Only Arai offers three unique head shapes in our helmets to achieve the best fit possible. DON’T GUESS SIZE Try the helmet on for a while before you buy it. Have your head measured using the method we describe, and remember that if it feels too snug on your cheeks, our cheek pads are adjustable. Shape and fit can change as helmet models evolve so it’s best to check.

ONLY FROM ARAI Just like fingerprints, no two heads are the same. So how could you expect one helmet to fit every head? If you understand the value that a properly fitting helmet has on both the enjoyment of the ride as well as its performance in an impact, you can appreciate the need for more than one interior head shape. Arai’s interior shapes have evolved over decades, and as a result three basic shapes emerged: Round Oval, Intermediate Oval and Long Oval. Having these different options gives every rider the chance to find their ideal fit; you can even customize your helmet further with various head and cheek pads to achieve the perfect fit for you. Only Arai gives every rider the opportunity to get the best fitting helmet possible.

FACING A POTENTIAL PROBLEM Some riders are concerned about getting the helmet to fit over their faces. We found many riders wearing helmets up to two sizes too big. That’s because when you can’t get the helmet past your cheeks or jaw, you think it’s too small, so you reach for a bigger size. But your brain is not in your face. It’s important to focus on head size first, and adjust the cheek pads after if necessary. Arai created the Facial Contour System in our cheek pads too, that makes ingress and egress easier and cradles your face better once on, so you can find the perfect fit.

2. TRY ON AN ARAI A HELMET NEEDS TO BE TRIED ON IN ORDER TO DETERMINE A PROPER FIT. With an Arai helmet, regardless of your presumed head shape, a side-by-side test fit, like a Quantum-X against a Signet-X, will give an apples-to-apples comparison to find your best fit. And, not surprisingly, in some cases your perfect fit isn’t the interior shape you thought you were.

THREE ARAI HELMET SHAPES

ROUND OVAL | QUANTUM-X The Round Oval shape was designed for riders whose heads are slightly wider rather than elongated. The Round Oval shape was achieved by using an interior head liner that combines thicker front and rear pads with thinner side pads.

INTERIOR LINING THICKNESSES

CHEEK PAD THICKNESSES

STANDARD

OPTIONAL

LONG OVAL

ROUND OVAL

CORSAIR-X RC

CORSAIR-X

CORSAIR-X RC

CORSAIR-X

HCM* (cm)

Lining Code

12 mm

10 mm

7 mm

5 mm

12 mm

10 mm

7 mm

5 mm

Thicker (mm)

Standard (mm)

Thinner (mm)

Thicker (mm)

Standard (mm)

Thinner (mm)

Size

3. MICRO FIT INTERIOR LINERS AND CHEEK PADS

–

XS 53–54

30 30 30 25 25 20

25 25 25 20 20 15

20 20 20 15 15

S 55–56 II M 57–58 III

30 30 25 20

25 25 20 15

20 20 15 12

INTERMEDIATE OVAL | CORSAIR-X, CONTOUR-X, REGENT-X, RAM-X, CLASSIC-V, XD-4, & VX-PRO4 Our Intermediate Oval shape is our standard interior shape. The Intermediate Oval fits the majority of head shapes in the North American markets.

Many Arai models feature removable cheek pads that have a 5mm peel off slice and removable head liners with a 5mm peel off slice on the temple pads. You can remove these to micro-fit if necessary without having to buy additional pads. Often this allows you to stay in your fitted size rather than the traditional solution of moving up a size, which decreases comfort and performance while increasing noise and movement. You can also order optional thicker or thinner head-liners and cheek pads allowing you to even further custom fit your Arai helmet. To order a liner of a different thickness, start with the Lining Code that matches your helmet size, then specify the desired thickness. For example, an optional 5mm liner for a large helmet would be specified as a III-5mm liner. All thicknesses of cheek pads will fit in all helmet sizes in their respective models.

59–60 III

XL 61–62 IV XXL 63–64 V

– –

XXL

–

XXXL

SIGNET-X / QUANTUM-X CONTOUR-X /REGENT-X

RAM-X

XD-5

12 mm

10 mm

7 mm

5 mm

12 mm

10 mm

7 mm

5 mm

Thicker (mm)

Standard (mm)

Thinner (mm)

Thicker (mm)

Standard (mm)

Thinner (mm)

Thicker (mm)

Standard (mm)

Thinner (mm)

12 mm

10 mm

7 mm

5 mm

30 30 30 25 25 20

25 25 25 20 20 15

20 20 20 15 15

30 30 30 25 30 25

25 25 25 20 25 20

20 20 20 15 20 15

30 30 30 25 25 20

25 25 25 20 20 12

20 20 20 15 15

XS S M L XL XXL

– –

XXL

–

XXXL

LONG OVAL | SIGNET-X The Long Oval shape was designed for riders with a narrow head and a more pronounced forehead. The Long Oval was created by increasing the space of the EPS liner front to back and decreasing the space side-to-side.

12 mm * HCM (Head Circumference Measurement) should be a starting point only in determining your helmet size. Determining the best possible fit should be from actual test fittings of Arai’s various interior fit packages. Changes and updates can affect the standard pad thickness supplied with your helmet. 10 mm 7 mm 5 mm 12 mm 10 mm 7 mm 5 mm

VX-PRO4

CLASSIC-V

XC-W

12 mm

10 mm

7 mm

5 mm

Thicker (mm)

Standard (mm)

Thinner (mm)

Thicker (mm)

Standard (mm)

Thinner (mm)

Thicker (mm)

Standard (mm)

Thinner (mm)

XS S M L XL XXL

30 30 35 30 30 30

25 25 30 25 25 25

20 20 25 20 20 20

30 30 30 25 25 20

25 25 25 20 20 15

20 20 20 15 15 12

30 30 35 30 30 30 25

25 25 30 25 25 25 20

20 20 25 20 20 20 15

XXL

–

XXXL

08 |

www.araiamericas.com | 09

ALUMINUM SILVER

BLACK FROST

BLACK

INTERNAL AIR CHANNEL | Improved ventilation with an enhanced air extraction system, pulling hot/moist air from the eye port area through ducted channels behind the cheek pads that exhaust out the side cowl vents. This helps keep the rider cool and helps to reduce fogging.

WHITE

SHIELD LATCH | The VAS latch captures and securely holds the shield closed to help resist unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation, even with heavy gloves. Even in the de-mist position, the shield has a positive stop to resist unintentional opening, but with a slight pull on the lift tab to clear this stop the shield simply lifts with ease. IC DUCT5 | The center IC Duct5 takes in 11% more air and the Type-12 diffuser intakes each take in 19% more air than the previous designs. All use a three-position slide gate to improve sealing for reduced noise and water intrusion. All Arai vents are lightly mounted to remain frangible, so they easily come off in an impact so as not to snag on obstacles or cause excess rotational force. PB-SNC 2 SHELL | A new resin, (Z Resin) developed and blended in-house, bonds the many layers and materials of the shell more securely using less resin, improving shell strength as well as reducing weight. The proprietary Super Fiber and special synthetic reinforcing fibers allow Arai to produce a stronger, yet lighter shell with excellent Glancing Off properties. The addition of the internal Structural net and Peripheral Belt further strengthen the shell with minimal increase to weight or thickness.

Perhaps the most fabled name in the entire Arai lineup, the Corsair has long been renowned as one of the most advanced, highest quality helmets available anywhere in the world. It represents the culmination of our vast experience in helmet design and unwavering focus on rider protection. And with features like the ingenious VAS shield mechanism, exceptional ventilation and an odor resistant interior lining, the Corsair-X has certainly earned its place as our flagship model.

INTERMEDIATE OVAL

10 |

www.araiamericas.com | 11

TSUBASA

SHOGUN

BLADE TRICO

OGURA

BLADE FLUORESCENT

12 |

www.araiamericas.com | 13

CORSAIR-X AIRFLOW

SCHWANTZ 30 TH ANNIVERSARY

NICKY RESET FROST

VINALES-6

HAYDEN LAGUNA

TATSUKI FROST

NAKASUGA-4

14 |

www.araiamericas.com | 15

TAKUMI FROST

NAKAGAMI-3

KIYONARI FROST

DANI SAMURAI-3

HAGA GP

REA-6

KIYONARI TRICO FROST

KR-2

www.araiamericas.com | 17

16 |

RC CARBON

CARBON FIBER FROM ARAI’S FORMULA 1 RACING | Based on Arai’s F1 GP helmets’ GP-7SRC technology, the Corsair-X RC uses the same CF found on the newest generation of commercial airliners, combined with Arai’s own resin plus Zylon reinforcement.

THE NEW ARAI SPOILER DF-X2 Introducing the new Arai Spoiler DF-X2 for the Corsair-X. The Spoiler DF-X2 was designed and developed in the ultra-competitive environment of Motorcycle Road Racing and is designed to provide increased stability and aerodynamic efficiency for the rider. The new Arai Spoiler DF-X2 is not integral to the shell and is designed to crush or detach easily when subjected to forces beyond normal use. This allows the Corsair-X equipped with the Spoiler DF-X2 to provide maximum stability at speed without compromising the round, smooth and strong shell needed to manage impact energy and maximize the helmet’s glancing off ability. For those street riders who like the look of the DF-X2, you’ll be glad to hear that initial feedback from test riders on the street suggests improved stability in turbulent air (like when passing a truck) as well as reduced buffeting at the upper limits of legal street speeds. Your results may vary, but it’s good to know there are some benefits on the street beyond just looking fast.

ARAI’S PERIPHERALLY BELTED CARBON FIBER SHELL CONSTRUCTION | The extremely strong, flexible and light carbon fiber outer shell is reinforced with Arai’s exclusive Peripheral Belt (extending across the

18 |

www.araiamericas.com | 19

BLACK FROST

ALUMINUM SILVER

FLUORESCENT YELLOW

WHITE

QVF AND QVR INTAKE/EXHAUST DUCTS | The Quantum-X features QVF three-position intake and QVR exhaust ducts for excellent air intake and exhaust performance when riding. Even when the front shutter is closed on the top duct, a side vent still serves as an exhaust vent.

FCS ® CHEEK PADS | The contoured shape – combined with multiple layers of varying foam densities supported by a foam “spring” – cradles the face like nothing that has ever come before, even from Arai. The spring makes on-off easier, while helping to block even more wind noise.

ARAI ROUND OVAL SHAPE | The Quantum-X features a new round oval fit package that is designed to deliver a comfortable fit for riders with a round overall head shape.

ROUND OVAL

PEARL BLACK

DIAMOND WHITE

DIAMOND BLACK

20 |

www.araiamericas.com | 21

ORIENTAL BLACK FROST

STEEL RED

STEEL BLUE

RAY BLACK

WAVE

QUANTUM-X AIRFLOW

RAY WHITE

22 |

www.araiamericas.com | 23

BLACK FROST

ALUMINUM SILVER

FLUORESCENT YELLOW

IMPROVED GLANCE OFF ABILITY | A smooth shell is key to a helmet’s ability to slide across a surface or Glance Off an obstacle during an impact. Arai’s VAS shield system lowers the pivot point by an average of 24mm, making the shell surface area in the critical temple area much smoother and better able to reduce impact energy getting into the helmet. QVF AND QVR INTAKE/EXHAUST DUCTS | The Signet-X features QVF three-position intake and QVR exhaust ducts for excellent air intake and exhaust performance when riding. Even when the front shutter is closed on the top duct, a side vent still serves as an exhaust vent.

WHITE

LONG OVAL FIT PACKAGE | The Signet-X’s longer interior shape is specifically designed for riders whose helmets can cause painful forehead hotspots due to interior shapes that aren’t made to fit their longish oval heads.

LONG OVAL

PEARL BLACK

DIAMOND WHITE

DIAMOND BLACK

www.araiamericas.com | 25

24 |

US FLAG BLACK FROST

ORIENTAL 2

FLAG ITALY

FLAG UK

STRIKE

SIGNET-X AIRFLOW

MOSAIC RED

MOSAIC YELLOW

26 |

www.araiamericas.com | 27

BLACK FROST

LIGHT GREY

BLUE FROST

DIAMOND WHITE

AERODYNAMIC REAR SPOILER WITH ONE PIECE EXHAUST FUNCTION | The one-piece aerodynamic rear exhaust/spoiler, operated by a 3-way switch, is inspired by the DF-X2 of the Corsair-X, but redesigned for touring use. It sits a little more forward on the shell and is fed by 3 ports in the shell. As part of the Contour- X’s comprehensive ventilation system it efficiently draws air but also smooths airflow over (and from the side) of the helmet, improving stability and reducing buffeting, especially while overtaking at highway speeds. The result is much less rider fatigue. Manufactured as thin and light as possible it’s designed to crush or break away upon impact, therefore having no influence on protective performance. 3D ARAI LOGO DUCT | Immediately noticeable, the new 3D Arai logo duct (made as thin as possible, just 3.5mm in depth) feeds two central 10mm intake ports. This is a first in an Arai, and entirely due to PB-cLc 2 ’s strength and the shell construction. It also works very well at low speed and with an upright riding position; at just 50km/h it’s channelling an extra 40% airflow, at 120km/h 7%. It can also be opened, or closed, easily with summer or winter gloves, via a short-stroke lever placed at the top; if the rider can’t see the lever and the logo is in its normal place, the duct is open. The Arai logo duct is designed to breakaway in the event of an impact. AIR-SCOOP CHIN VENT | Also new is the 3-position (open, midway and closed) sliding air-scoop chin vent which flows a larger intake volume of air and has a replaceable filter. The actuating mechanism is thicker and easy to use with gloves.

DIAMOND BLACK

INTERCOM ACCOMMODATION | Designed to fit and connect a communication system easily on the shell exterior – and without any compromise to the protection offered by the inner EPS liner.

CONTOUR-X AIRFLOW

28 |

www.araiamericas.com | 29

SNAKE WHITE

FACE FLUORESCENT YELLOW

SNAKE RED

OUTER SHELL: PB-cLc 2 (PERIPHERALLY BELTED COMPLEX LAMINATE CONSTRUCTION) |The Contour-X outer shell design outlines a stylish, organic shape and uses PB-cLc2 for lightweight strength and integrated side ducts. The AR-mat has been substituted with a new material which makes it possible to reduce the weight, while maintaining strength. An extra layer of Super Fiber belting maintains rigidity in a crucial area while offering flat sides for easy fitment of an intercom system.

PODIIUM

VARIABLE AXIS SYSTEM (VAS) | With VAS, the visor mounting position is lowered, yielding an average of an additional 24mm across both temple areas, in pursuit of the ideal smoother shape that increases the ability of glancing off energy. As a result, this has made it possible for more of the shell to be smoother along and above the test line of the Snell standard.

5MM WIDER OPENING | The exclusive shell flares 5mm around the opening, making it easier to get the helmet on and off (for newcomers to Arai the initial ‘snugness’ when putting the helmet on or taking it off can be challenging).

NECK ROLL WIRE POCKET | A small stitched opening on the inside of the neck roll allows the intercom system installer to easily tuck away any excess wiring that may be left-over after installing the speakers. For a nice, clean final look and ride.

HAYES JOLLY ROGERS

INTERMEDIATE OVAL

30 |

www.araiamericas.com | 31

CODE YELLOW

MODERN GREY

CODE RED

COMFORT: 5MM WIDER BASE | The exclusive shell flares 5mm around the base, making it easier to get the helmet on and off. But even with the larger opening, the helmet remains secure with the FCS2 cheek pads providing stability as well as effectively blocking external noise from getting inside. REAR VENTILATION | New one-piece exhaust vent improves exhaust performance and aerodynamic stability. And as the extraction of heat build-up is important for both rider comfort and moisture build-up in the eye port area that can cause shield fogging, the top exhaust vent on the Regent-X remains open at all times.

WHITE

INTERIOR | Adjustable perimeter liner and cheek pads allow owners to custom fit to their exact size requirement. Soft-brushed removable liner allows for easy cleaning, and provides incredible comfort.

INTERMEDIATE OVAL

GUN METALLIC FROST

BLACK FROST

32 |

www.araiamericas.com | 33

ROCK MULTI

JUNGLE-2

PATCH FLUORESCENT YELLOW FROST

PATCH FLUORESCENT RED FROST

MARK YELLOW

STAR & STRIPES BLACK FROST

This graphic shown on a different helmet model

MARK RED

STAR & STRIPES

34 |

www.araiamericas.com | 35

FLUORESCENT YELLOW

MODERN GREY

GUN METALLIC FROST

COMPLETELY REDESIGNED SHELL AND SHIELD SYSTEM | The RAM-X features the newly developed VAS-Z shield system, with a lower pivot point that allows the shell to be smoother in the temple area improving the helmet’s ability to slide more smoothly should it contact the ground or obstacles, contributing to gains in protection. This lower pivot position is possible due to the dual-pivot assembly, creating a “Variable Axis System” for which the system was named, allowing the shield to function where a single pivot could not. VENTILATION | Utilizing the same diffusers as Arai’s flagship Corsair-X model, with a revised stationary aero stabilizer wing to improve helmet stability and further reduce rider fatigue. Possibly the most ventilated open face helmet on the market today, and for those riding at slow speeds or in extreme temperatures we think you will agree.

DIAMOND WHITE

LIGHTER | A new resin (Z Resin) developed and blended in-house, combining several resins with different characteristics, bonds the many layers and materials of the shell more securely using less resin, improving shell strength as well as reducing weight.

PRO SHADE SYSTEM | Up, down or in the middle, the new shield system adapts to many light conditions without sacrificing helmet impact absorption performance. The Pro Shade’s unique design lets air pass through even at high speed. GLASSES COMPATIBLE | Removable foam in the top of the earcup allows the arms of glasses to easily slide into the helmet. The earcups are easy to remove from the helmet and have removable covers for easy washing and access to this removable part.

DIAMOND BLACK

ALUMINUM SILVER

INTERMEDIATE OVAL

RAM-X AIRFLOW

BLACK FROST

www.araiamericas.com | 37

36 |

GUN METALLIC FROST

COPPER FROST

MODERN GREY

ONE-PIECE, MULTI-DENSITY EPS LINER | Optimized from decades of research and development for maximum protection throughout the entire liner. Designed in concert with Arai’s proprietary outer shell, the multi-density EPS beads are molded into a single liner, maximizing energy absorption requirements as needed in each area of the helmet. This tuning maximizes impact energy absorption ability while maintaining a uniform and compact helmet. FOCUS ON PROTECTION | With a focus on protection, even our retro ¾ helmet gets our peripherally-belted (PB-cLc 2 ) shell, providing tremendous strength in an incredibly small and lightweight package. Adding reinforcement where needed, without increased weight or shell thickness.

WHITE

VENTILATION | This smooth, retro helmet is actually fully ventilated: air enters via three intakes, flows over the head and exits through a multi-staged channel that leads to all-new Venturi exhaust ports.

BUTTON CLOSURE GOGGLE STRAP HOLDER | Completing the old-school look is the faux- stitched leather goggle strap holder that helps keep your goggle straps from sliding up the helmet when riding.

BLACK

INTERMEDIATE OVAL

BLACK FROST

www.araiamericas.com | 39

38 |

CLASSIC-V AIRFLOW

ALUMINUM SILVER

FLUORESCENT YELLOW

BLACK FROST

XD-5 PEAK |The all-new peak is designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting, all of which leads to an overall more comfortable riding experience.

WHITE

XD-5 VAS-A SHIELD SYSTEM | This new shield system allows for easier and faster shield swaps. The shield can be attached or removed without the need for any tools. The peak utilizes only one screw on each side for removal/installation.

XD-5 FRONT LOGO VENT | The effectiveness of conventional forehead vents could be limited by the rider’s position, but with the front logo duct, airflow is unaffected by changes in riding position. Thanks to advances in shell technology, we can add holes in the forehead area for this vent without compromising the helmet’s ability to protect.

XD-5 AR SPOILER | Set in a position that makes it ideal for adventure riding, the AR spoiler contributes to reducing fatigue from turbulent air throughout long rides, and works to draw out hot air from the crown area.

MOJAVE SAGE

40 |

www.araiamericas.com | 41

BLACK

AFRICA TWIN-2 RED

AFRICA TWIN-2 BLUE

XD-5 ALL-NEW SHELL AND SHIELD SYSTEM | The amount of energy that any helmet can absorb is inherently limited and we believe in a crash the only option is to have the helmet glance in a way that directs the impact energy away from the inside of the helmet. The shell of the XD-5 is designed to be round so that it can more easily ‘glance off’ impact energy in an actual crash.

COSMIC RED

XD-5 MOUTH SHUTTER |The opening area for the XD-5 mouth-shutter doubled compared to the XD-4. Thanks to the evolution in shell strength from the previous generation, the aperture could be made larger, and the mouth shutter could be made to flow more fresh air without the need for the mesh vents as seen on its predecessors.

XD-5 INNER SHUTTER | Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the amount of airflow entering the helmet. If the inner and outer shutters are both open, the air will be directed towards your mouth. If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging.

XD-5 ODOR-RESISTANT INTERIOR | The XD-5 utilizes an interior liner that has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties. The head-liner is equipped with a removable foam layer on both the left and right sides, allowing you to remove 5mm of foam from each side if desired for micro-fitting.

COSMIC YELLOW

COSMIC BLUE

42 |

www.araiamericas.com | 43

DISCOVERY ORANGE

DISCOVERY BLACK FROST

DISCOVERY BLUE

The XD- 5 offers three distinct configurations depending on rider preference or riding conditions. Change the look every time you ride, or even during the same ride. GO CONFIGURE

CONFIGURATION A

CONFIGURATION B

CONFIGURATION C

WARNING: The visor/peak supplied with the XD-5 helmet is not suitable for high- speed use. At such speeds, air catching a side or main surface of the peak may cause difficulty in returning the head to a forward and/or level position. To understand and prepare for this possible effect, you should first try to experience it at low speeds, gradually increasing speed so that you will know what to expect and determine when the peak should be removed for higher-speed riding.

XD-5 AIRFLOW

INTERMEDIATE OVAL

44 |

www.araiamericas.com | 45

WHITE

BLACK FROST

A SMOOTH INSTEAD OF RIDGED SHELL | The shell itself is consistently round and smooth, maintaining the Glancing Off shape concept in areas above the acknowledged test line and influencing those below the test line. Here, the rounded chin bar maintains the same compact shell length as the previous model, the VX-Pro3. The result is less protrusion, which may be less likely to catch and dig in during a spill. SHELL MATERIAL | In order to maximize performance, we precisely assemble the shell from multiple proprietary components. Super Fiber, one of the primary materials, costs up to six times more than standard fiberglass but provides 30% higher tensile strength and increased penetration resistance. The PB-cLc (Peripherally Belted Complex Laminate Construction) method demands precise and time-consuming assembly by master craftsmen from many individual pieces. CHIN BAR VENT GRILL | Installed on the uniquely rounded chin bar, the stainless mesh grill is now mounted from the outside on the exterior vent cap and can be easily removed for cleaning or damage replacement. The vent cap is also designed to break away from the chin bar in the event of impact.

VX-PRO4 AIRFLOW

46 |

www.araiamericas.com | 47

STREAM PINK

BLOCK BLACK

BLOCK

REAR DUCT | The Air-Through top-rear-duct center brace also functions as a goggle-strap guide. The diffusers can be removed or replaced quickly and easily by removing a single screw on the rear-duct center brace.

IMPROVED PEAK | The peak is 14mm longer and 5mm wider than the previous model for improved ability to deflect roost and flying debris. To compensate for increased lift, the air outlets on the improved peak have been made larger as well. Made with durable, yet extremely flexible material, mounted with plastic screws designed to break on impact, so as not to snag on impact which could send energy into the helmet or cause excess rotational force. EMERGENCY RELEASE SYSTEM | The revised Emergency Release Cheek Pad system has the release tab repositioned and is easier to access by rescue staff. Pioneered by Arai, the concept behind the emergency release cheek pad design was to allow trained medical personnel easier access to an injured rider, reducing the chance of unintentional injury.

STREAM BLUE

48 |

www.araiamericas.com | 49

RESOLUTE YELLOW

COMBAT-2 YELLOW

RESOLUTE RED

SPLASH BLACK

STARS & STRIPES FLUORESCENT YELLOW

STARS & STRIPES BLACK FROST

50 |

www.araiamericas.com | 51

SCOOP YELLOW

STANTON

BATTLE YELLOW

SCOOP RED

INTERMEDIATE OVAL

BATTLE PURPLE

52 |

www.araiamericas.com | 53

WARRANTY | WARNINGS

MODELS AT A GLANCE

ARAI’S 5-YEAR WARRANTY All Arai helmets are warranted against defects in material and workmanship, and as serviceable only for the properly fitted first user for 5 years after purchase, but no more than 7 years from the date of manufacture. Based on the recommendations of the Snell Memorial Foundation www.smf.org it should be replaced within 5 years of first use. Throughout the years, Arai has recorded the manufacture date on helmets in a standard month/year format (00/00). While the manufacture date has always been recorded on the chinstrap, as it is a permanent part of the helmet, the position on the chinstrap has changed over the years for various reasons. Most recently, the date-of- manufacture can be found etched on the metal D-ring on the chin strap.

EVEN A HELMET AS GOOD AS AN ARAI WON’T LAST FOREVER Like most major helmet manufacturers, Arai subscribes to the Snell Memorial Foundation benchmark of five years as the suggested usable lifespan of a motorcycle helmet. Why? Think of a helmet in terms of your body. No matter how good it may look, or how well you take care of it, age still takes its toll. Even with minimal use, a helmet is affected by things like the acids and oils in sweat, haircare products, cleaners, polishes, pollution, exposure to UV rays, etc. At about the five-year mark, helmet interiors begin to show wear and/or deterioration, which should serve as an alert to its overall condition. The helmet’s fit may begin to feel a little “loose,” not as snug as it once did. This, as well as unseen aging and deterioration of the EPS liner and fiberglass shell can affect the helmet’s ability to perform as it was originally designed in an impact. If a helmet suffers an impact and any doubt exists as to its further ability to protect, it should either be returned to the manufacturer for competent inspection or discarded and replaced. These are the reasons to replace your helmet after five years. Of course, if your helmet becomes less than snug in fit, or damaged, it should be replaced before the five-year mark.

FEATURES AND BENEFITS

STANDARD

OPTIONAL

PB-SNC 2 Shell | The Peripherally Belted Structural Net Composite shell is created from Super Fiber and special synthetic fibers assembled by Arai experts, and provides superb tensile strength and flexibility and also features Arai’s newly developed resins resulting in even more strength with less weight.

PB-ScLc 2 Shell | The new Peripherally Belted Super Complex Laminate Construction shell combines multiple materials and techniques created internally by Arai over more than 6 decades of experience that deliver both performance and affordability.

PB-cLc Shell | The Peripherally Belted Complex Laminate Construction reinforces Arai’s cLc shell for more strength and weight reduction adding more to Arai’s accumulation of incremental improvements over decades of experience to pursue gains in protection.

PB-cLc 1 Shell | The Peripherally Belted Complex Laminate Construction shell features a newly developed AR MAT which allows the Regent-X to achieve a lower cost without compromising weight or protection performance.

PB-cLc 2 Shell | The Peripherally Belted Complex Laminate Construction with latest generation Z resin and AR Mat is the accumulation of years of Arai’s experience in shell making, handmade with over 25 individual pieces bound by Arai’s new proprietary resin and reinforced by the Peripheral Belt.

DF-X2 | The new Arai Spoiler DF-X2 for the Corsair-X. The Spoiler DF-X2 was designed and developed in the ultra-competitive environment of MotoGP and is designed to provide increased stability and aerodynamic efficiency for the rider.

VAS Shield Mechanism | The Variable Axis System (VAS) incorporates a moving pivot point allowing for a lower shield mount position. A dual-function lever releases the cover plate and shield pin for quick shield removal.

VAS Shield Demist Latch | This innovative latch captures and securely holds the shield closed to help resist unexpected opening. The demist function allows the shield to be opened just a bit while still fastened and is larger to allow for intuitive and seamless shield operation.

DATE OF MANUFACTURE LASER ENGRAVED ON METAL D-RING BUCKLE

VAS Max Vision BV Shield | This shield features brow vents and a cavity to receive the Pinlock lens insert and provides better visibility for all types of riding.

WARNING: IF IT SOUNDS TOO GOOD TO BE TRUE, IT PROBABLY IS!

Pinlock Lens Insert | This clear fog mitigating lens insert is made of a special material by Pinlock to absorb moisture and enhance visibility in all conditions.

Pro Shade System | This shield system offers a convenient external shade to block ambient light, while functioning as an aerodynamic peak in the raised position.

DF-X2 KNOCK-OFFS Don’t be fooled by Arai DF-X2 Knock- offs. If your priority is protection, only use Genuine Arai accessories. Only buy this item from an Authorized Arai dealer that can be found on our Dealer Locator on our website, araiamericas.com, or from our website. All Arai add-on accessories are made with plastic, designed to be both lightweight and frangible so they crush, break or come off under impact so as not to catch on an obstacle or the ground during an impact, which may send energy into the helmet or create excessive rotational force. Crushing, breaking or coming off allows the helmets to slide past or “glance off” some of that energy, minimizing how much gets into the helmet.

through established retail dealers from stock.

ES Chin Curtain | This curtain accentuates the egg-shaped form of the shell and blocks turbulent air from entering the underside; works with pull-down spoiler.

Pull Down Spoiler | Helps to minimize wind noise and turbulence, this movable piece under the chin also aids with the extraction of hot air from the rider’s face.

Therefore, we encourage every- one to be alert and use common sense when purchasing an Arai.

FCS ® Cheek Pad Design | Arai’s patented Facial Contour System adds just the right amount of support by moving out of the way when putting the helmet on, but once the helmet is on, cradling the rider’s face and jaw area.

5mm Peel-Off Layer | This removable layer gives the rider a micro-fitting option to easily adjust the cheek pads to one size thinner cheek pads.

WARNING | BUYING AN ARAI HELMET ONLINE Online shoppers take care to be sure they are dealing with an authorized Arai e-commerce retailer. These dealers have agreed to follow guidelines to help customers make the best purchase possible — even long distance. To find an authorized Arai dealer, visit araiamericas.com. WARNING | BUYING FROM OTHER COUNTRIES Each world market requires different helmet standards. Never purchase helmets from outside your market as they may not comply with legally required standards for your country, not to mention the fact that their interior fit may not have been designed for your market and as a result may be very uncomfortable. Helmets purchased from outside a given market are not eligible for after-sales service or warranty claims. Arai and its authorized agents cannot endorse the continued use of a non-certified helmet. WARNING | No helmet can protect the wearer against all foreseeable impacts. Nothing is a substitute for safe riding practices.

Common sense suggests that you can’t buy a brand new, real Arai for $200 or less. So, if you see an advertisement that appears to defy logic, walk away and hold onto your money. We don’t have eyes on the entire internet, but we’ve heard stories and even found a few examples of unscrupulous websites offering Arai helmets at ridiculously low prices. Most of these sites use real Arai images, without license or permission, to lure you in. Some then switch to an image of the real helmet you’re buying hoping that you won’t notice. Check out the above photos of a real Arai next to a fake sold online. Additionally, we have heard of other sites that look legitimate and show dozens of real Arai images, offering crazy low prices – but for that price you have to wait for a special bulk purchase direct from Arai. They take your money and tell you to wait. Eventually, after months, you get tired of waiting and press for information at which time you are told that Arai wouldn’t make the deal. It is then up to you to get your pre-payment back. Arai produces to order, through established wholesale distributors only, who then sell

Emergency Release Cheek Pads | These allow for easier access to an injured rider by sliding out via integrated pull tabs built into the cheek pad underside.

Removable Neck Roll Pad | This removable pad allows easier cleaning and replaceability along the rider’s neck for sound insulation and comfort.

Odor Resistant Interior Lining | Exclusive liner with odor resistant material stays fresher between cleanings.

Dry Cool Interior Lining | For all day comfort this moisture wicking material keeps you cool and minimizes the buildup of sweat.

Brushed Nylon Interior Lining | Very comfortable soft material provides all day comfort for those long rides.

Outward-Flaring Hyper-Ridge | Flares out to provide a larger opening for easier ingress and egress; the reinforcement band circles the bottom of the shell adding strength and lowering the helmet’s center of gravity.

Hyper-Ridge | The reinforcement band circles the bottom of the shell adding strength and lowering the helmet’s center of gravity.

Brow Vents | Gives you more cooling air in the temple and forehead area without holes in the critical forehead section of the shell or impact absorbing liner.

Cowl Exhaust Vent | Exhausts heat more efficiently; these vents are sculpted into the rear shell shape for optimal aerodynamic characteristics.

Diffuser Type 12 | These newly developed air diffusing top vent covers are 20mm longer than the previous design to improve stability and airflow.

QVF Series Top Vents | The three-position front intake duct provides optimal cooling and aerodynamics.

QVR Series Top Vents | This rear exhaust duct features a three-position sliding lever and stabilizing aerodynamics for a smoother ride.

Chin Vent Shutter | This closable gate in front of the center vent allows the rider to block out extreme weather conditions. Can be opened in warmer weather.

Removable Peak | This adjustable sun-blocking piece shields your eyes from glare.

All Arai motorcycle helmets meet or exceed Snell standards in addition to mandated DOT standards. For further information on the Snell standard, check smf.org.

www.araiamericas.com | 55

54 |

Page 1 Page 2-3 Page 4-5 Page 6-7 Page 8-9 Page 10-11 Page 12-13 Page 14-15 Page 16-17 Page 18-19 Page 20-21 Page 22-23 Page 24-25 Page 26-27 Page 28-29 Page 30-31 Page 32-33 Page 34-35 Page 36-37 Page 38-39 Page 40-41 Page 42-43 Page 44-45 Page 46-47 Page 48-49 Page 50-51 Page 52-53 Page 54-55 Page 56-57 Page 58-59 Page 60-61

www.araiamericas.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online