applicable welding code.
WDT 123 SMAW Fillet/PAC/CAC Lab, 3 hours (0-9-0) This course is designed to introduce the student to the proper set-up and operation of the shielded metal arc welding equipment. Emphasis is placed on striking and controlling the arc, and proper fit up of fillet joints. This course is also designed to instruct students in the safe operation of plasma arc and carbon arc cutting. Upon completion, students should be able to make fillet welds in all positions using electrodes in the F-4 groups in accordance with applicable welding code and be able to safely operate plasma arc and carbon arc equipment and perform those operations as per applicable welding code. (0-9-0) This course provides instruction and demonstration using the various transfer methods and techniques to gas metal arc and flux arc welds. Topics included are safety, equipment set- up, joint design and preparation, and gases. WDT 124 Gas Metal Arc/Flux Cored Arc Welding Lab, 3 hours WDT 125 Shielded Metal Arc Welding Groove Lab, 3 hours (0-9-0) This course provides instruction and demonstrations in the shielded metal arc welding process on carbon steel plate with various sizes F3 and F4 group electrodes in all positions. Emphasis is placed on welding groove joints and using various F3 and F4 group electrodes in all positions. Upon completion, the student should be able to make visually acceptable groove weld joints in accordance with applicable welding codes.
WDT 156 GTAW Stainless Pipe Lab, 3 hours
(0-9-0)
Prerequisite : WDT 116 and/or as required by college This course is designed to provide the student with the skills in welding stainless steel pipe with gas tungsten arc welding techniques in various pipe weld positions. Upon completion, students should be able to perform gas tungsten arc welding on stainless steel pipe with the prescribed filler metals in various positions in accordance with the applicable code. (1-2-0) The Visual Inspection (VT) inspection will consist of checking for cracks, porosity, crater cracks, undercut, and arc strikes. Students will also verify weld profile and acceptability according to AWS code, also including WPQ (welding procedure qualification record). WDT 200 Welding VT (Visual Inspection), 2 hours
WDT 217 SMAW Carbon Pipe, 3 hours
(1-6-0)
Note: There is an approved standardized plan-of-instruction for this course. This course introduces the student to the practices and procedures of welding carbon steel pipe using the shielded metal arc weld (SMAW) process. Emphasis is placed on pipe positions, electrode selection, joint geometry, joint preparation and fit-up. Upon completion, students should be able to identify pipe positions, electrodes, proper joint geometry joint preparation, and fit-up in accordance with applicable codes. (2-3-0) This course provides the student with knowledge needed to perform gas tungsten arc welds using ferrous and/or non-ferrous metals, according to applicable welding codes. Topics
WDT 228 Gas Tungsten Arc Welding, 3 hours
223
www.lbwcc.edu
2022-23 College Catalog and Student Handbook
Made with FlippingBook - professional solution for displaying marketing and sales documents online