SEED FINISHING
FINISH PGRs
TECH TIPS
Usually not needed.
High light levels can cause leaf scorch. Very wet conditions will promote damping-off diseases.
FINISH PGRs
TECH TIPS
Usually not needed, but if needed B-Nine ® WSG sprays of 1,250-2,500 ppm are effective.
High light levels can cause leaf scorch. Very wet conditions will promote damping-off diseases.
FINISH PGRs
TECH TIPS
Spray with B-Nine ® at 2,500-5,000 ppm as needed.
Verbena need to be germinated on the dry side at moisture level 3. It is best to water in plug trays to moisture level 3 prior to sow, sow the seeds and then irrigate lightly only when needed to maintain moisture level 3.
FINISH PGRs
TECH TIPS
Verbena need to be germinated on the dry side at moisture level 3. It is best to water in plug trays to moisture level 3 prior to sow, sow the seeds and then irrigate lightly only when needed to maintain moisture level 3.
Drench with Bonzi at 1-3 ppm as needed to control growth. Also responds to sprays of Bonzi at 10-20 ppm or B-Nine ® at 3,500-5,000 ppm.
FINISH PGRs
TECH TIPS
Spray with B-Nine ® at 2,500-5,000 ppm as needed.
Verbena need to be germinated on the dry side at moisture level 3. It is best to water in plug trays to moisture level 3 prior to sow, sow the seeds and then irrigate lightly only when needed to maintain moisture level 3.
FINISH PGRs
TECH TIPS
If needed sprays of B-Nine ® WSG at 2,500-5,000 ppm or A-Rest ® at 2-4 ppm may be applied.
Soil temperatures lower than 75 °F (23 °C) during germination may decrease germination rates. Keeping media pH at 5.8 or lower will help reduce the likelihood of Thielaviopsis infections.
FINISH PGRs
TECH TIPS
If needed sprays of B-Nine ® WSG at 2,500-5,000 ppm or A-Rest ® at 2-4 ppm may be applied.
Soil temperatures lower than 75 °F (23 °C) during germination may decrease germination rates. Keeping media pH at 5.8 or lower will help reduce the likelihood of Thielaviopsis infections.
G R O W E R S U C C E S S G U I D E 2 0 2 1 – 2 0 2 2 | A N N U A L S
47
Made with FlippingBook Learn more on our blog