VEGETATIVE PROPAGATION
Geranium Interspecific CALLIOPE ® LARGE Pelargonium interspecific REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
3.5-4 Weeks 70-74 °F (21-23 °C)
Recommended
Comments: To help reduce bottom leaf yellowing during propagation (e.g., on delayed shipments or where cuttings have gotten warm during shipping), Fascination ® can be sprayed on the cuttings at 2.0–2.5 ppm within 24 hours after sticking. Calliope Large growth can be controlled using sprays of Cycocel ® at 1,000 ppm and under hot conditions with a tank mix spray of Cycocel ® (1,000 ppm) + B-Nine ® WSG (2,500 ppm). Bonzi ® sprays are not recommended in propagation because of the chance of getting into the rooting media and stunting the plant. Florel ® can also be sprayed at 300–350 ppm 2.5–3 weeks after sticking and after good root formation to improve branching, reduce premature flowering, and to control growth. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
Geranium Interspecific CALLIOPE ® MEDIUM Pelargonium interspecific REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
3.5-4 Weeks 70-74 °F (21-23 °C)
Recommended
Comments: To help reduce bottom leaf yellowing during propagation (e.g., on delayed shipments or where cuttings have gotten warm during shipping), Fascination ® can be sprayed on the cuttings at 2.0–2.5 ppm within 24 hours after sticking. Calliope Medium growth can be controlled using sprays of Cycocel ® at 750-1,000 ppm and under hot conditions with a tank mix spray of Cycocel ® (1,000 ppm) + B-Nine ® WSG (2,500 ppm). Bonzi ® sprays are not recommended in propagation because of the chance of getting into the rooting media and stunting the plant. Florel ® can also be sprayed at 300–350 ppm 2.5–3 weeks after sticking and after good root formation to improve branching, reduce premature flowering, and to control growth. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the plant growth regulator (PGR) to absorb into the leaf tissue.
Geranium Interspecific MOJO ™ Pelargonium interspecific REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
3.5-4 Weeks 70-74 °F (21-23 °C)
Recommended
Comments: To help reduce bottom leaf yellowing during propagation (e.g., on delayed shipments or where cuttings have gotten warm during shipping), Fascination ® can be sprayed on the cuttings at 2.0–2.5 ppm within 24 hours after sticking. Mojo growth can be controlled using sprays of Cycocel ® at 750-1,000 ppm and under hot conditions with a tank mix spray of Cycocel ® (1,000 ppm) + B-Nine ® WSG (2,500 ppm). Bonzi ® sprays are not recommended in propagation because of the chance of getting into the rooting media and stunting the plant. Florel ® can also be sprayed at 300–350 ppm 2.5–3 weeks after sticking and after good root formation to improve branching, reduce premature flowering, and to control growth. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
Geranium Interspecific MOXIE! ™ Pelargonium interspecific REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
3.5-4 Weeks 70-74 °F (21-23 °C)
Recommended
Comments: To help reduce bottom leaf yellowing during propagation (e.g., on delayed shipments or where cuttings have gotten warm during shipping), Fascination ® can be sprayed on the cuttings at 2.0–2.5 ppm within 24 hours after sticking. Moxie! growth can be controlled using sprays of Cycocel ® at 750-1,000 ppm and under hot conditions with a tank mix spray of Cycocel ® (1,000 ppm) + B-Nine ® WSG (2,500 ppm). Bonzi ® sprays are not recommended in propagation because of the chance of getting into the rooting media and stunting the plant. Florel ® can also be sprayed at 300–350 ppm 2.5–3 weeks after sticking and after good root formation to improve branching, reduce premature flowering, and to control growth. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
Geranium Interspecific PRETTY LITTLE ™ Pelargonium interspecific REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
3.5-4 Weeks 70-74 °F (21-23 °C)
Recommended
Comments: To help reduce bottom leaf yellowing during propagation (e.g., on delayed shipments or where cuttings have gotten warm during shipping), Fascination ® can be sprayed on the cuttings at 2.0–2.5 ppm within 24 hours after sticking. Pretty Little growth can be controlled using sprays of Cycocel ® at 750-1,000 ppm. Bonzi ® sprays are not recommended in propagation because of the chance of getting into the rooting media and stunting the plant. Florel ® can also be sprayed at 300–350 ppm 2.5–3 weeks after sticking and after good root formation to improve branching, reduce premature flowering, and to control growth. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
Geranium Ivy BLIZZARD ™ Pelargonium peltatum REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
4.5-5 Weeks 70-74 °F (21-23 °C)
Recommended
Comments: To help reduce bottom leaf yellowing during propagation (e.g., on delayed shipments or where cuttings have gotten warm during shipping), Fascination ® can be sprayed on the cuttings at 2.0–2.5 ppm within 24 hours after sticking. Blizzard Ivy Geranium growth can be controlled using sprays of Cycocel ® at 750-1,000 ppm and under hot conditions with a tank mix spray of Cycocel ® (1,000 ppm) + B-Nine ® WSG (2,500 ppm). Bonzi ® sprays are not recommended in propagation because of the chance of getting into the rooting media and stunting the plant. Florel ® can also be sprayed at 300–350 ppm 2.5–3 weeks after sticking and after good root formation to improve branching, reduce premature flowering, and to control growth. Do not spray Florel ® on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
G R O W E R S U C C E S S G U I D E 2 0 2 1 – 2 0 2 2 | A N N U A L S
57
Made with FlippingBook Learn more on our blog