VEGETATIVE PROPAGATION
Lantana BANDOLERO ™ Lantana camara REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
4.5-5 Weeks 72-74 °F (22-23 °C)
Recommended
Comments: To control growth after rooting, a tank-mix spray of B-Nine ® WSG (2,500-3,500 ppm) + Cycocel ® (1,000 ppm) can be used. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500-3,500 ppm) can also be used to control growth and improve branching.
Lantana HOT BLOODED ® Lantana camara REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
4.5-5 Weeks 72-74 °F (22-23 °C)
Recommended
Comments: To control growth after rooting, a tank-mix spray of B-Nine ® WSG (2,500-3,500 ppm) + Cycocel ® (1,000 ppm) can be used. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500-3,500 ppm) can also be used to control growth and improve branching.
Lantana LANDSCAPE BANDANA ® Lantana camara REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, CC, AutoStix ™
Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 3–4 days and after cuttings become fully hydrated. Not
4.5-5 Weeks 72-74 °F (22-23 °C)
Recommended
Comments: To control growth after rooting, a tank-mix spray of B-Nine ® WSG (2,500-3,500 ppm) + Cycocel ® (1,000 ppm) can be used. A tank-mix spray of Florel ® (350 ppm) + B-Nine ® WSG (2,500-3,500 ppm) can also be used to control growth and improve branching. Landscape Bandana varieties can be relatively vigorous and will typically need chemical growth control.
Licorice Plant HELICHRYSUM PETIOLARE Helichrysum petiolare REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2-3 days and after cuttings become fully hydrated. Not
3.5-4 Weeks 70-74 °F (21-23 °C)
recommended
Comments: Helichrysum petiolare is a relatively compact, semi-trailing plant. It typically does not require any chemical growth regulation in propagation. Transplant on time to avoid stretched growth.
Lobelia TECHNO ® Lobelia erinus REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2-3 days and after cuttings become fully hydrated.
Recommended 3.5-4 Weeks 70-74 °F (21-23 °C)
Comments: To control growth after rooting, sprays of B-Nine ® WSG (1,500-2,500 ppm) is sufficient. It is also becoming popular for growers to combine Florel ® (350 ppm) with the B-Nine ® WSG (1,500 ppm) to increase growth control and to improve branching. These Florel ® + B-Nine ® WSG combo sprays should be applied to actively growing plants. Do not spray B-Nine ® WSG or Florel ® + B-Nine ® WSG tank mixes on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
Lobelia TECHNO ® UPRIGHT Lobelia erinus REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2-3 days and after cuttings become fully hydrated.
Recommended 3.5-4 Weeks 70-74 °F (21-23 °C)
Comments: To control growth after rooting, sprays of B-Nine ® WSG (1,500-2,500 ppm) is sufficient. It is also becoming popular for growers to combine Florel ® (350 ppm) with the B-Nine ® WSG (1,500 ppm) to increase growth control and to improve branching. These Florel ® + B-Nine ® WSG combo sprays should be applied to actively growing plants. Do not spray B-Nine ® WSG or Florel ® + B-Nine ® WSG tank mixes on stressed or weak cuttings. For all sprays listed above, the mist should be off for a minimum of one hour for the PGR to absorb into the leaf tissue.
Lysimachia GOLDII Lysimachia nummularia REC TRAY PRODUCT FORM ROOTING HORMONE MIST TIME
PINCH
PROP TIME BOTTOM HEAT
105-cell (30 mm) or larger.
URC, Pre-Pinch, AutoStix ™
Not Recommended
CapSil ® (spray adjuvant) can be sprayed on the cuttings at a rate of 2–4 oz/100 gal within 1–2 days after sticking to help in rehydration of the cuttings. Misting should be significantly reduced after 2-3 days and after cuttings become fully hydrated.
Recommended 4 Weeks
70-74 °F (21-23 °C)
Comments: Lysimachia Goldii is a trailing plant that is typically pinched once in propagation to control growth. Syngenta Flowers offers Lysimiachia Goldii as a pre-pinched cutting to decrease labor costs and provide the grower with a liner that develops roots faster and creates a denser liner. Transplant on time to avoid stretched growth and over-grown liners.
G R O W E R S U C C E S S G U I D E 2 0 2 1 – 2 0 2 2 | A N N U A L S
60
Made with FlippingBook Learn more on our blog