1935-40 Engine & Trans Mount Kits
Fits 1965-up Small Block Ford V8 Into 1935-40 Ford Car
ENGINE MOUNTING KIT Bolt-on kit (solid axle). Includes bolt-on frame adapters, frame corner braces, engine side mounts, through-bolt cushion set, bolts, and instructions. CP-2203 $135.00 kit
1935-40 FORD AUTO TRANSMISSION MOUNTING KITS Wishbone splitting kits are not required on cars using independent front suspension. ES-2262 1935-36 C-4 $135.00 kit ES-2263 1935-36 C-4 with wishbone kit $200.00 kit ES-2267 1937-40 C-4 $135.00 kit ES-2268 1937-40 C-4 with wishbone kit $200.00 kit
WELD-ON ENGINE MOUNTING KIT Frame must be boxed to use. Generally used with Mustang I.F.S.. Includes weld-on frame adapters, engine side mounts, through-bolt cushion set, bolts and instructions. CP-2203G $100.00 kit
GENERAL INFORMATION Ford engines require more fitting than other types. The firewall must be cut for clearance. A steering adaptor must be used on solid axle cars as original will not clear. Power steering requires extra work fitting; manual steering is recommended. Stock steering will not work. Requires Bronco type oil pan, or the pan can be cut and modified for clearance. Oil filter clears. Does not sit engine high. Good fan clearance. Stock exhaust manifolds clear. Wishbone must be split or 4-bar used. C-4 is highly recommended.
AR-2284
1935-40 BOXING PLATE KITS Boxing plates are 3/16" thick steel. Two plates per kit, right and left side.
1935-40 FRONT CROSS-MEMBER
AR-2280 Front, stock frame, stock cross-member $60.00 kit AR-2281 Front, stock frame, Mustang II cross-member $60.00 kit AR-2284 Rear, stock frame $85.00 kit
Weld-in replacement for the 1935-40 Fords, stock or repro frames. Clears fuel pump on the Chevrolet V8. AU-2235 $100.00 each
366
Made with FlippingBook - Online magazine maker