EndoVac ™ TRUE APICAL NEGATIVE PRESSURE IRRIGATION SYSTEM.
For decades, endodontic irrigation involved filling a syringe with sodium hypochlorite, carefully putting it into the canal and then cautiously injecting with positive pressure. Numerous accounts of hypochlorite accidents have highlighted the inherent danger in this method of irrigation. EndoVac is a true evolution in endodontic irrigation. Instead of applying positive pressure, EndoVac uses suction to PULL irrigant down the root canal, and then up and away into the Hi-Vac suction unit. We call this “negative apical pressure,” because EndoVac applies suction rather than forceful injection.
THE ENDOVAC MicroCannula reaches full working length, drawing irrigant into the last few, critical millimeters of the root canal.
ORDERING INFORMATION
4 SIMPLE COMPONENTS 1. The Multi-Port Adapter (MPA) plugs directly into your office Hi-Vac and serves as a caddy for the EndoVac tubing and other components. It is autoclavable for easy sterilization, and is easily removed and re- attached to the Hi-Vac system for maximum portability between operatories. 2. The Master Delivery Tip (MDT) plugs directly into the blue port of the MPA and provides a constant flow of irrigant without the risk of overflow. The MDT is used during coronal flaring and after each instrument change to remove gross debris arising from instrumentation. 3. The MacroCannula is used to remove coarse debris inside the canal after all instrumentation is completed. In this step, the MacroCannula and the MDT are used at the same time. It is helpful to have a dental assistant deliver the irrigant with the MDT while the clinician works the MacroCannula up and down each canal. 4. The MicroCannula is a 28 gauge needle (0.32 mm) with 12 laser-drilled, microscopic evacuation holes – each less than 100 microns in size – placed at the end of the needle. Fluid is drawn to the apical termination through these holes, creating a vortex-like cleaning of the apical third.
973-3003 EndoVac Complete Installation Kit
1 Multi-Port Adapter, 2 Handpiece/Fingerpiece Sets, 2 Extra Evacuation Tubing Sets, 20 MacroCannulas, 20 MicroCannulas (25mm), 20 Master Delivery Tips. 6 20cc Syringes for NaOCl, 6- 3cc Syringes for EDTA.
973-3036 EndoVac Starter Kit
1 Multi-Port Adapter, 1- Handpiece/Fingerpiece Set, 2 Evacuation Tubing Set, 5 MacroCannulas, 5 MicroCannulas (25mm), 5 Master Delivery Tips, 6 20cc Syringes for NaOCl, 6- 3cc Syringes for EDTA.
973-3006 EndoVac Conversion Kit (for 1st generation users) 1- Multi-Port Adapter, Extra Evacuation Tubing Set, Macro-Cannulas, 5 MicroCannulas (25mm), 5- Master Delivery Tips.
973-3004 EndoVac Multi-Port Adapter 973-3018 Fingerpiece/Handpiece Set 973-3021 Single EndoVac Handpiece 973-3022 Single EndoVac Fingerpiece 973-3005 Evacuation Tubing
(contains 2 autoclavable tubes: Macro/Micro & MDT)
973-3013 Master Delivery Tips (20 pk) autoclavable 973-3012 Master Delivery Tips (5 pk) autoclavable
973-3027 25mm MacroCannulas (20 pk) 973-3020 25mm MacroCannulas (5 pk) 973-3014 21mm MicroCannulas (20 pk) 973-3025 21mm MicroCannulas (5 pk) 973-3026 25mm MicroCannulas (20 pk) 973-3019 25mm MicroCannulas (5 pk) 973-3024 31mm MicroCannulas (5 pk)
973-3016 20cc Syringes (6 pk) 973-3017 3cc Syringes (6 pk)
*Not available in the EU
32 | Kerr Endodontics
Made with FlippingBook - Share PDF online