BUC TIPS*
CPR TIPS*
973-0401
BUC-1
973-1031
CPR-1 The CPR-1 is used for vibrating posts and cores and as an aid in crown and bridge removal. The working length is 17.0mm CPR-2D The CPR-2D has a contra-angled head and durable shape for removal of core materials.
973-0406
BUC-1A The BUC-1 and BUC-1A can be used for gross dentin removal, moving access line angles, cutting a groove in the mesial access wall to drop in to MB2 canals, and for unroofing pulp chambers. Helpful in finding reclusive MB2s.
973-1032
BUC-2
973-0402
973-1033
CPR-3D
BUC-2A The BUC-2, with its disk-like radiused tip, can be used to plane attached pulp stones from the pulp chamber floor. In molars, it can be used to horizontally smooth the pulp chamber floor toget to the darker-colored dentin. Can be used for corners of molar access prep and bicuspid access prep.
973-0403
CPR-4D
973-1034 973-1035
CPR-5D Use for troughing around posts, chasing calcified canals, elimination of obstructions, and removal of broken instruments. The working lengths are 17.0 mm for CPR- 3D; 19.0 mm for CPR-4D; and 24.0 mm for CPR-5D
BUC-3
973-0404
973-1011
CPR-6
BUC-3A The BUC-3 and BUC-3A are extremely active instruments with sharp tips. They are used for chasing canals halfway up a root or for digging around a post or carrier-based obturator to remove it. The water port is placed near the cutting surface of the tip. Use only at lowest power level.
973-0407
973-1012
CPR-7
973-1013
CPR-8 These instruments are made of titanium alloy. These titanium alloy instruments are generally used in the mid and apical portion of the root with illumination and magnification. These instruments are end cutting only and are commonly used to ditch around broken files, aiding in their removal. Use at low power level.
* Not available in all regions
*Not available in the EU
ULTRASONIC FILE ADAPTER
973-0031 File Adapter
56 | Kerr Endodontics
Made with FlippingBook - Share PDF online