Step 6: Install Spline Now we will install the spline, which is the rubberized, rope-like material that will hold the new door or window screen into place in the frame. If you are using the old spline, then you already know the length of your spline is correct. If you are using new spline, you can either cut it to match the length of the old spline OR just wait til the spline is installed and cut the excess at the end. This is probably the best option.To install the spline, you will use the wheel tool, and more specifically, the wider wheel with the channel. Place the end of your spline into a corner of the frame and use the wheel tool to push the screen down into the channel.To wrap the spline around the corners, the method I find easiest is to use a flat head screwdriver to push the spline down into place. It works a little easier than the wheel tool in the tight corners.You will continue in this fashion, using the screwdriver in the corners and the wheel tool to push the spline into place around all four sides of the frame. You will want to go over each side a couple of times with the wheel tool to ensure that the spline is situated all the way into the channel. Step 7: Use a Utility Knife to Cut Excess Rescreening Material With the screen now securely installed into the window or door frame, we can now cut the excess rescreening material from around the perimeter of the frame. Do this using a utility knife, preferably with a new blade. Hold the knife parallel to the surface of the new screen and just above the spline. Cut along the frame. Step 8: Re-Install Screens
CONGRATS! You just Changed your First Window Screen!
AARON BERGERON Need help with a bigger project? Just give me a call!
410-251-2029
Made with FlippingBook - Online catalogs