About Us PROFLEX ® manufactures state of the art products that can assist with water vapor reduction, sound control, and crack suppression. PROFLEX ® membranes are specially designed to be used under thinset, mudset mortars and adhesives. PROFLEX ® has been a pioneer for years in the development of products designed to make flooring and finished surfaces last longer then ever by keeping at the forefront of ever changing technology. PROFLEX ® continues to be a driving force in t he flooring installation industry, providing our customers the peace of mind that a quality flooring system will last for years. PROFLEX ® is actively involved in the finish flooring and building industries. PROFLEX ® has memberships with industry leading associations and organizations. PROFLEX ® representatives are active participants on committees and focus groups that strive to set superior performance standards for sound installation practices, and proper concern for the efficient use of natural resources and environmentally friendly practices.
TABLE OF CONTENTS About Us .......................................................................... 2 Table of Contents ........................................................... 3 Warranties . ...................................................................... 4-7 Surface Preparation ....................................................... 8-28 Floor Patch & Self-Leveling....................................9-11 PROFLEX ® Liberty Series Self-Leveling ...............12 Moisture Mitigation................................................13-14 Waterproofing .........................................................15-19 Preformed Niche.....................................................20-21 100% Waterproof Backer Board.............................22 Waterproofing, Sealant, and Bonding Compound.......................................23 Crack Isolation Membranes...................................24-27 Multi-Purpose Sealer & Primer..............................28 Primers for Self-Adhered Membranes...................28 Sound Control ................................................................. 29-36 Understanding Sound Control...............................30 Carpet Sound Control............................................31 Resilient Floor Underlayments...............................32 Self-Adhered Membranes......................................33 Rubber Membranes................................................34 Companion Products for Rubber Membrane.......35-36 Tile Setting . ..................................................................... 37-51 Non-Modified Mortar .............................................38-39 Polymer-Modified Mortar .......................................39-45 Mastic.......................................................................45 Liberty Series...........................................................46-48 Thick Bed Mortars...................................................49-51 Mortar Additives.....................................................51 Grouts & Caulks .............................................................. 52-55 Premium Grout........................................................53 Grout........................................................................54 Caulk. .......................................................................55 Flooring Adhesives ........................................................ 56-66 Resilient Flooring Adhesives..................................57-58 VCT Flooring Adhesives.........................................59 Premium Wood Flooring Adhesives......................60-61 Wood Flooring Adhesives......................................62-63 Specialty Adhesives................................................64 Carpet Adhesives....................................................65 Adhesive Cleaner....................................................66 Sports Flooring ............................................................... 67-68 10% Color Sports Flooring.....................................68 Care & Maintenance ...................................................... 69-75 Surface Protection...................................................70 Flooring & Wood Repair Systems..........................71 Flooring Sealers......................................................72-73 Add to Mixture Sealers & Grout Release..............74 Flooring Cleaners....................................................75 IAPMO Research and Testing . ..................................... 76-77 IAPMO Certificate of Listing . .................................76 File Numbers...........................................................77 PROFLEX LEED ® Points . .............................................. 78-85 Understanding LEED ® Points.................................78 Certificate of Compliance . .....................................79 PROFLEX ® Products Contributing to LEED ® Points ...80-85 Resources ......................................................................... 86-103 Intertek Certificates .................................................86-88 Clean Air Certificate for Primers ............................86 Clean Air Certificate for Adhesives and Sealants ..... 87 Clean Air Certificate for Mortar . ............................88 Packaging & Shipping............................................89-97 Product Recommendations....................................98-106 Resources for Architects.........................................106-107
3
WARRANTIES
SURFACE PREPARATION
PROFLEX ® IFR with PROFLEX ® Liquid Latex as Primer
†
PROFLEX ® MB25 (rake trowel applied up to 25 lbs. MVR or 100%rH)
† †
PROFLEX ® MB25 (Roller applied up to 25 lbs. MVER or 100% rH)
† †
PROFLEX ® MS225 (One Coat Application up to 10 lbs. or 93% RH)
PROFLEX ® MS225 (Two-coat Application up to 15 lbs. or 95% RH)
† †
PROFLEX ® AF300
† †
HYDRA-STOP (Two-coat Application up to 25 lbs. or 100% RH)
PROFLEX ® DB200/250/280
†
PROFLEX ® DPU with Primer
† † † † † † † †
PROFLEX ® Elastomeric Membranes with Primer
PROFLEX ® Feather Flex
† † †
HYDRA-MAX ™ (Interior use)
†
HYDRA-MAX ™ (Exterior use)
†
PROFLEX ® HYDRA-LOCK ®
† † † †
PROFLEX ® HYDRA-MAT ®
PROFLEX ® HYDRA-SEAL ®
† †
HYDRA-WELD ™
PROFLEX ® IFR (as a “stand alone” product)
†
PROFLEX ® LV-100
† † † †
PROFLEX ® LV-200
PROFLEX ® MSI
† †
PROFLEX ® PSP
† †
PROFLEX ® RCU ® Membranes
† † † †
PROFLEX ® RCU ® RL5
†
PROFLEX ® SLU with Primer
† † † †
PROFLEX ® SP1 Primer
PROFLEX ® SUPERSCREED
† † † †
PROFLEX ® USL
PROFLEX ® UCM ® UNCOUPLING MEMBRANE
† † †
†
PROFLEX ® WALL MUD (WITH LATEX)
† †
PROFLEX ® FLOOR MUD (WITH LATEX)
PROFLEX ® SPORTS FLOORING 10%
† †
PROFLEX ® SPORTS FLOORING 90%
*Visit proflex.us or contact technical@proflex.us for more information. †: Product qualifies for extended warranty when used as part of a system of PROFLEX® products. Inquire with Technical Support for required products to be used in each qualifying system at 877.577.6353 or technical@proflex.us.
4
WARRANTIES
1 YEAR
5 YEARS
10 YEARS
15 YEARS
25+ YEARS
YEAR % 1 100
YEAR % 1 100 2 80 3 60 4 40 5 20
YEAR % 1 100 2 100 3 100 4 100 5 100 6 50 7 40 8 30 9 20 10 10
YEAR % 1 100 2 100 3 100 4 100 5 100 6 100 7 100 8 100 9 100 10 100 11 70 12 60 13 50 14 40 15 20
YEAR % 1 100 2 100 3 100 4 100 5 100 6 100 7 100 8 100 9 100 10 100 11 100 12 100 13 100 14 100 15 100 16 90 17 80 18 70 19 60 20 50 21 40 22 30 23 20 24 15 25 10
MANUFACTURER DEFECT WARRANTY The PROFLEX ® Limited Warranty offers coverage for a period of 1 year.
BRONZE WARRANTY The PROFLEX ® Bronze Warranty offers coverage for a period of 5 years.
SILVER WARRANTY The PROFLEX ® Silver Warranty offers coverage for a period of 10 years.
GOLD WARRANTY The PROFLEX ® Gold Warranty offers coverage for a period of 15 years.
PLATINUM WARRANTY The PROFLEX ® Platinum Warranty offers coverage for a period of Limited Lifetime or 25-years.
5
WARRANTIES
FLOORING ADHESIVES AND THINSETS
PROFLEX ® ProBond
†
PROFLEX ® PRO-STICK ® 25
†
PROFLEX ® U-SET
† †
PROFLEX ® PRO-STICK ® 27
PROFLEX ® PRO-STICK ® 27 (mixed with Liquid Latex)
†
PROFLEX ® PRO-STICK ® 32 PROFLEX ® PRO-STICK ® 35 PROFLEX ® PRO-STICK ® 37 PROFLEX ® PRO-STICK ® 40 LHT PROFLEX ® PRO-STICK ® 42
†
†
†
† †
PROFLEX ® PRO-STICK ® 42 (mixed with Liquid Latex)
† † † † † †
PROFLEX ® PRO-STICK ® 42 XLP PROFLEX ® PRO-STICK ® 42 XLT PROFLEX ® LIBERTY LEVEL PROFLEX ® LIBERTY MAX PROFLEX ® LIBERTY LITE PROFLEX ® LIBERTY LHT PROFLEX ® LIBERTY BOND PROFLEX ® LIBERTY FLEX PROFLEX ® PRO-STICK ® 42L PROFLEX ® PRO-STICK ® 42R PROFLEX ® PRO-STICK ® 50 PROFLEX ® PRO-STICK ® 75 PROFLEX ® PRO-STICK ® 76 PROFLEX ® PRO-STICK ® 77 PROFLEX ® PRO-STICK ® 82 PROFLEX ® PRO-STICK ® 85 PROFLEX ® PRO-STICK ® 88 PROFLEX ® PRO-STICK ® 100
†
† †
†
† †
†
† †
†
†
† †
PROFLEX ® PWA ® 160 (not for use with membranes)
†
*Visit proflex.us or contact technical@proflex.us for more information. †: Product qualifies for extended warranty when used as part of a complete system of PROFLEX® products. Inquire with Technical Support for required products to be used in each qualifying system at 877.577.6353 or technical@proflex.us. *All products would be eligible for a 5 year warranty if used with competitors products.
6
WARRANTIES
FLOORING ADHESIVES AND THINSETS
PROFLEX ® PWA ® 200 PROFLEX ® PWA ® 500 PROFLEX ® PWA ® 600 PROFLEX ® PWA ® 700 PROFLEX ® PWA ® 800
† †
† † †
PROFLEX ® RCA
†
PROFLEX ® Sanded Grout (mixed with Grout Guard)
† †
PROFLEX ® Unsanded Grout PROFLEX ® SUPERSTICK ®
(mixed with Grout Guard)
†
*Visit proflex.us or contact technical@proflex.us for more information. †: Product qualifies for extended warranty when used as part of a complete system of PROFLEX® products. Inquire with Technical Support for required products to be used in each qualifying system at 877.577.6353 or technical@proflex.us. *All products would be eligible for a 5 year warranty if used with competitors products.
7
7
SURFACE PREPARATION
PROFLEX ® offers a variety of products designed to get your substrate ready to install finished flooring surfaces. From simple patch filling to deep pour self- leveling applications, PROFLEX ® Surface Preparation Products are easy to use, set quickly, and meet leading industry standards for surface preparation. Contact your PROFLEX ® representative for additional details.
PROFLEX ® Products, Inc.
877-577-6353
proflex.us
8
FLOOR PATCH & SELF-LEVELING
FEATHER FLEX Single Step Coating to Smooth and Level Substrates
A high-performance, one-component product for leveling and smoothing concrete, ceramic and quarry tile, terrazzo, wood, and cut-back adhesives prior to the installation of finished flooring like VCT, continuous vinyl flooring, or other standard flooring products. Mixes easily with water to produce a skim coat that is easy to apply from a feather edge up to 1/2”. Does not require priming, and cures for flooring installation in as little as 30 minutes, depending on thickness and drying conditions.
Item #FF10
Packaging:
Coverage:
10 lb. bag, 200 bags per pallet
Over Concrete: 100-150 sq. ft. Over Plywood: 200-250 sq. ft.
Performance properties
Results
Working Time
15-20 minutes
Final Set
30-50 minutes
*Typical values for material cured at 70 degrees Farenheight, 50% RH.
PSP Multi-Purpose Cementitious Patching Compound
PSP is a polymer-modified product that is capable of being used as a skim coat or patch by simply adjusting the liquid-to-powder mix ratio. PSP is an “All Purpose” material for the installer who requires product consolidation without giving up quality and performance. Also is designed to give maximum pot life, and regain workability by simply remixing without additional water.
Item #PSP & PSP 25
Packaging:
Coverage:
35 lb. pail, 36 pails per pallet. (Item #PSP) 25 lb. bag, 100 bags per pallet. (Item #PSP25)
As a skimcoat, 375-415 sq. ft./35 lb. pail At 1/8” thickness, 30-40 sq. ft./35 lb. pail
Performance Properties Pot Life Drying Time Initial Set Final Set Color Compressive Strength Installation of Flooring Coverings
Results
Results 10-15 minutes
@ 73ºF/22.5ºC
40-60 minutes, depending on thickness and ambient conditions
@ 73ºF/22.5ºC
@ 73ºF/22.5ºC
15-30 minutes
@ 73ºF/22.5ºC
45-60 minutes
Gray
-
60 minutes or when product is dry 4 hours, 1200 psi 28 days, 4500 psi
ASTM C-109
-
9
FLOOR PATCH & SELF-LEVELING
IFR
Industrial Strength Flooring Repair Compound
A Portland cement-based, polymer-modified, fiber-reinforced, rapid-setting, single-component used for surface repair or as a leveling mortar. Suitable for interior and exterior restoration of deteriorated concrete elements and slabs. It may be placed into forms or used in horizontal applications. May be used as an exposed industrial wear surface or as an underlayment for resilient, carpet, laminate, ceramic tile, and wood flooring.
Item #IFR
Packaging:
40 lbs. per bag, 56 bags per pallet
PROFLEX® Liquid Latex
Coverage:
45-50 sq. ft.-1/8” Thickness
Performance Properties
Method
Results
20 minutes initial 30 minutes final
Set Time
VICAT (ASTM C-191)
Item #LL1 & LL5
1 hour , 2000 psi 3 hours, 3500 psi 1 day, 5000 psi 28 days, 7500 psi
Compressive Strength
ASTM C-109
Use with PROFLEX ® IFR to upgrade to 15 Year Gold Warranty. Use PROFLEX ® Latex Additive as a primer. Available in 5-gallon pails and 1 gallon containers.
7 days, 400 psi 28 days, 470 psi
Tensile Strength
ASTM C-109
7 days, 1250 psi 28 days, 2550 psi
Flexural Strength
ASTM C-348
7 days, 1950 psi 28 days, 2550 psi
Shear Bond Adhesion
ASTM C-882
Modulus of Elasticity
ASTM C-492-4
4.22 x 106 psi
A cement-based self-leveling underlayment providing a smooth and flat concrete surface. Installs quickly and can be delivered via pump or pouring methods. Mixes with water and is a rapid setting formulation. Foot traffic is ready in as little as 4-6 hours. No troweling or grinding. Self–healing during flowing and working time. Reduced weight with superior strength. For applications up to 1 1/2”. SLU IS FOR INTERIOR USE ONLY. SLU Self-Leveling Compound up to 1 ½” Per Single Pour
Packaging: 50 lb. bag, 56 bags per pallet. Primer 1 Gallon. (Item #SLUP)
Coverage: 50 lb. bag, 55 sq. ft. at 1/8” thickness (Note: Coverages will vary based on substrate.)
Item #SLU
Primer 1 gallon: 1 Gallon Primer, 200-300 sq. ft.
PROFLEX® SLU Primer
Performance Properties
Results
Mix Ratio
4.5-4.75 qt. Water/50lb. bag 15 minutes 30 minutes Foot traffic 4-6 hours
Flowing Time
Working Time
Setting Time
Portland Cement
Main Binder
Proprietary
Additives
4000 psi 700 lbs./sq. in., at 28 days 5-6 inches
Compressive Strength
Item #SLUP
Flexural Strength
PROFLEX ® SLU Primer is a required product with SLU. See product data sheet for more information.
Flowability (2 minutes)
Liquid Merge Time
10 minutes
10
FLOOR PATCH & SELF-LEVELING
USL Industrial Strength Flooring Repair Compound
PROFLEX ® USL is a high-performance, fast-setting, multi-purpose, polymer-modified Portland cement- based self-leveling underlayment approved to be used over PROFLEX ® Peel & Stick Membranes and PROFLEX ® RCU ® Membranes. PROFLEX ® USL may be placed from ⅛ ” to ½” when going over PROFLEX ® underlayments, or ⅛” to 5” when used as a stand alone self-leveling underlayment. USL can also be used as an exposed wear surface for interior applications only and can be polished to achieve the desired appearance. USL IS FOR INTERIOR USE ONLY.
Item #USL
Packaging:
50 lb. bag, 56 bags per pallet.
NOTE: DPU primer is required before applying USL over normal concrete and exterior grade plywood (Lath is required).
Coverage:
50 lb. bag, 24 sq. ft. at 1/4” thickness (Note: Coverages will vary based on substrate.)
Performance Properties
Method
Results
1 day, 2400 psi 7 days, 3500 psi 28 days, 6500 psi
Compressive Strength
ASTM C-109
Flexural Strength Working Time
28 days, 975 psi
ASTM C-348
-
Minimum 30 Minutes
Minimum 70 minutes Maximum 150 minutes
Set Time
ASTM C-191
*Typical values for material cured at 70 degrees Farenheit, 50% RH.
A self-leveling compound of calcium–aluminate cement, sand, and proprietary chemicals used to smooth and finish rough interior concrete or wood floors where a fast set is desired within hours. May be applied up to 1½” in a single application. Mixes with water, initial set 3-5 hours, self–healing during flowing and working time, lightweight, and superior strength. DPU IS FOR INTERIOR USE ONLY. DPU Self-Leveling Compound up to 1½” Per Single Pour over Concrete
Packaging: 50 lb. bag, 56 bags per pallet. (Item #DPU) Primer 1 Gallon. (Item #DPUP)
Item #DPU
PROFLEX® DPU PRIMER
Coverage:
1/4"
1/2"
1"
1 1/2"
26
14
7
5
Method
Results
Performance Properties
5 hours, 1500 psi 24 hours, 2500 psi 28 days, 4000 psi
Compressive Strength
ASTM C-109
DPU Primer is required before applying DPU. See the product data sheet for more information. Item #DPUP
Working Time
Minimum ASTM C-191
15 minutes 2-3 hours
Set Time
11
PROFLEX ® LIBERTY SERIES SELF-LEVELING
LIBERTY LEVEL Pourable, Self-Leveling Underlayment
Item #LB60
Liberty Level is an advanced self-leveling underlayment designed for fast-track applications. This high-flow, calcium aluminate-based formula creates a smooth surface for finished floor coverings. Advantages : • High flow distance and speed
• No additional sanding or skim coating is required once cured • Suitable for installations ranging from 1⁄16" to 1 1/2" neat • < 60 minutes of working time • Walkable in 2-3 hours • Compatible with ceramic tile, stone, wood, vinyl, linoleum, ceramic, rubber, and VCT • Zero VOCs
PROFLEX® LIBERTY PRIMER
Coverage: 50 lb. plastic bags. 56 bags per pallet Packaging:
Application depth
Coverage per 50 lbs.
1 ⁄ 16" (1.6 mm) 1 ⁄ 8" (3 mm) 1 ⁄ 4" (6 mm) 1 ⁄ 2" (12 mm)
100 sq. ft 50 sq. ft. 25 sq. ft.
Liberty Primer is required before applying Liberty Level. See the product data sheet for more information. Item #LP1
12.5 sq. ft. 6.25 sq. ft. 2.778 sq. ft.
1" (25 mm)
1 1/2" (38 mm)
12
MOISTURE MITIGATION
MB-25 is a two-component, epoxy reaction resin-based sealer for professional flooring installation over damp sub floors. MB-25 will mitigate moisture pressure from a humid sub- floor to an acceptable level for any flooring installation. It will bridge minor cracks in the sub-floor. MB-25 spreads easily and creates a dust-free surface ready for safe installation of flooring. Advantages: • Moisture Barrier up to 25 lbs. or 100% RH • Helps contribute to LEED ® Credits • Same day installations 6-hour cure time • No need to shot blast prior to the application • Easy to mix and apply • Easy clean-up when wet • Contains no water, solvents, or VOC's Suitable for Use With:: Multi-Ply Engineered Plank, Solid Planks, Bamboo, Plywood, LVT/LVP, Sheet Vinyl, Carpet Tile, Cork and Rubber Flooring, Tile, PROFLEX ® Peel & Stick Membranes MB-25 Premium Moisture Barrier up to 25 lbs. or 100% RH
Item #MB-25
Packaging: 1 box, 2 components per box Component A: 1.2 Gallons Component B: 0.79
Coverage: 3 ⁄ 8 ” nap roller, squeegee, or a 1/16” x 1/16” x 1/16” notched trowel. Maximum recommended coverage is 300 – 350 sq. ft. per mixed unit.
MS-225 Moisture Barrier up to 15 lbs. or 95% RH
MS-225 Moisture Sealer is a unique one-part, multi-functional moisture barrier that dries to a clear film that is alkali and water-resistant. It is designed for use on interior porous concrete substrates as a penetrating and film-forming hydrophobic (water-repelling) barrier to protect flooring installations against moisture vapor transmission rates of up to 15 lbs. Per 1000 sq. ft. per 24 hours and in-situ Relative Humidity (RH) moisture readings up to 95%. The multi- functionality of the product results from the barrier coatings ability to prime porous concrete, eliminate dust, and neutralize surface alkalinity by forming a barrier coating that provides an acceptable pH level and blocks the migration of alkaline salts through the slab. Advantages: • Reduces Moisture Vapor Transmission up to 15 lbs or 95% RH • Reduces the porosity of gypsum concrete • Ideal for fast-track projects where concrete slabs are not fully cured
Item #MS-225
Suitable for Use With:
MS-225 is recommended and warranty for grade level or higher concrete floors. Use MS-225 in conjunction with an appropriate PROFLEX ® flooring adhesive for permanent protection from moisture-related adhesive bond failures.
Coverage:
4 Gallon (15.48L) container 48 containers per pallet
3/8" (10mm) Short nap roller: Up to 250 sq. ft./per gallon.
Packaging:
13
MOISTURE MITIGATION
Item #HY43
HYDRA-STOP Water-Based Moisture Vapor Suppression Product
HYDRA-STOP is an innovative one-component, moisture vapor suppression product and copolymer primer. PROFLEX ® HYDRA-STOP is designed to treat concrete surfaces showing high moisture levels (up to 100% RH) and protect against alkalinity (up to 14pH) prior to the installation of moisture or alkaline-sensitive floor coverings. HYDRA-STOP is formulated to be applied to damp or new concrete, as little as 48 hours old with a moisture vapor emission rate (MVER) less than or equal to 25 lbs. per 1,000 ft 2 per 24 hours (0.12 kg/m2 per 24 hours) or a maximum relative humidity of 100%. Advantages: • Packaging: 5 gallon pail
Protects up to 100% RH and 25 lbs MVER with two coats or 95% RH and 15 lbs MVER with one coat Protects moisture or alkaline-sensitive floor coverings
• • •
Coverage: HYDRA-STOP requires two coats, with the following application • First coat applied at a rate of 150 sq. ft./gallon • Second coat applied at a rate of 300 sq. ft. /gallon
Interior use only
One-component, ready to use
14
WATERPROOFING
Item #HM2P
HYDRA-MAX ™ Waterproofing and Crack-Isolation Membrane
HYDRA-MAX™ is an innovative 2-component system, fast-curing, hybrid resin liquid-applied waterproofing coating designed for ceramic tile and dimensioned stone for concrete, cementitious surfaces, wet areas that include showers, pools, spas, fountains and decks. The hybrid resin polymer formulation incorporates high-grade fillers and waterproofing agents resulting in a semi-textured surface that promotes strong tile mortar adhesion to the cured waterproofing layer. PROFLEX ® HYDRA-MAX™ exhibits remarkable adhesion properties across diverse substrates, making it well-suited for application on damp and wet surfaces. Advantages : • Liquid waterproofing with a faster cure time within 1-2 hours • Excellent adhesion on wet and damp substrates • Good Flexibility • High mechanical properties • Crack isolation & bridging 1/8" • Exceeds ANSI A118.10 and A118.12 • Compatible with PROFLEX ® tile setting mortars (ANSI A118.11 or A118.15) • Approved for use with PROFLEX ® ’s Packaging: 5 gallon pail 36 pails per pallet Coverage: 5 Gallons-approximately 137.8 ft2. (12.8 m2) in two coats waterproofing application. Apply each single coat layer at a coverage rate of 13. 6 ft2/gal. (0.75 Lt./ m2), wet 20-25 mils.
urethane wood glues and wood flooring as waterproofing barrier & moisture mitigation for wood (interior use) Textured Surface: Provides good adhesion key to adhesives for bonding.
• •
Exterior use
HYDRA-Mesh Fabric is used for horizontal and vertical transitions.
6” x 50’ ft roll
Item #HSF 6x50
15
WATERPROOFING
WITH FASTER CURE!
Item #HS1, HS5, HS1W
HYDRA-SEAL ® Waterproofing and Crack Isolation Membrane
Advantages: • HYDRA-SEAL ® is a thin, load-bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, HYDRA-SEAL ® provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.). Packaging: 5-gallon pail, 36 per pallet. (Item #HS5) Interior or Exterior Use
•
Built-in antimicrobial for mold and mildew resistance at the substrate
1-gallon pail, 4 per case, 45 cases per pallet. (Item #HS1) 1 roll mesh fabric for horizontal to vertical transitions, 6” x 50’ Coverage: Single coat crack isolation application. For waterproofing applications- Two-coat applications. 50 sq. ft. per gallon For crack isolation applications-80 sq. ft. per gallon. Coverage is an approximate, actual rates may vary based on the porosity of substrates
• Initial cure in 2-4 hours (70° F, 50% R.H.), foot traffic in 4 – 6 hours • Easy to use; can be applied by trowel, airless sprayer, paint brush or roller • Crack Isolation up to 1/4” • Adheres to all common surfaces • Thin section that does not interfere with elevations • Exceeds ANSI A118.10 and A118.12 membrane requirements • May be turned up for base flashing and applied to walls for wainscot or shower wall application. • Compliant with Uniform Plumbing Code (UPC)
Color: White or Black
HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll/16 rolls per case
Item #HS1W
Item #HSF 6x50
16
WATERPROOFING
Item #HL1, HL3
HYDRA-LOCK ® Waterproofing and Crack-Isolation Membrane
HYDRA-LOCK ® is a thin, load-bearing, crack-suppression, waterproof membrane. That exceeds ANSI A118.10 and ANSI A118.12 requirements. The material is installed in a semi-fluid state and can be applied to most shapes or irregular forms such as base flashings, walls, etc.
Advantages: • Interior or exterior applications • Single-component, cold applied • Dries Overnight • Non-Flammable • Available in Black or White • Crack-isolation up to 3/8"
Packaging: 1-gallon pail 3.5-gallon pail Coverage: Single coat crack isolation application 1-gallon-80 sq. ft. at 30-35 mils wet film thickness Two-coat waterproofing applications 1-gallon-50 sq. ft. at 40-50 mils wet film thickness
HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll/16 rolls per case
Item #HSF 6x50
17
WATERPROOFING
HYDRA-MAT ® is a 3-ply waterproofing sheet membrane designed to waterproof interior subfloors and walls under thinset tile applications. It can be installed directly over any cleaned and prepared surface including concrete, plywood, gypsum, cement board, or OSB board. The unique product construction layers a polyethylene membrane between two polypropylene nonwovens to create an impermeable, waterproofing system that stops water from damaging the structure. For Exterior Applications, HYDRA-MAT ® CANNOT BE USED as a primary waterproofing. Advantages: • 100% waterproof guarantee • Mold and mildew-resistant • Can be applied directly over clean subfloor • Easy and quick installation • Install with a non-modified mortar, modified mortar HYDRA-MAT ® Waterproofing and Crack-Isolation Membrane
• IAPMO (UPC) Listing File #513 • ICC-ES PMG Report-PMG-1123
Item #HM1, HM2 and HM3
Packaging: 108 sq. ft. (Item #HM3), 323 sq. ft. (Item #HM2), and 646 sq. ft. (Item #HM1)
Item #HM5
Item #HM6
Item #HM7
Item #HM4 5X5M
Item #HM4 5C30M
HYDRA-MAT ® is formed in a variety of shapes for easy installation. Available in inside and outside corners, piping collar, and seaming tape (available in 16.4 LF and 98.5 LF).
18
WATERPROOFING
UCM ® Uncoupling Membrane
PROFLEX ® UCM ® is designed specifically for ceramic tile and dimension stone installations serving as an uncoupling layer and vapor management layer that accommodates moisture from beneath the tile covering. UCM ® can be used as a shower pan, exterior drainage mat, and waterproofing mat. An added bonus to UCM ® is it’s sound deadening characteristics not normally found in uncoupling waterproofing mats.
Advantages:
• • • • •
Uncoupling
Waterproofing and vapor reduction Crack suppression 1/3 less mortar needed Reduces sound transmission
• Use with tile, extra large tile, hardwood, or laminates • Fast and easy installation with no downtime. Just cut with a utility knife. • Install with modified or non-modified mortars • When used in a complete PROFLEX ® system warranty, eligible for a 25-year warranty
Item #UCM
Sound Testing: IIC: 61 STC: 62 *Tested on 6" concrete slab with gypsum panel ceiling
Packaging: 108 sq. ft. per roll, 24 rolls per pallet
Companion Product:
U-SET Non-Modified Thinset Mortar
• Developed for better overnight cure and bond over non-absorbative uncoupling membranes and large unit tiles • Intended for interior/exterior residential installations on floors when mixed with water • Ideal for interior/exterior residential and light commercial floor installations when mixed with PROFLEX ® Liquid Latex PROFLEX ® U-SET is a non-modified thinset mortar intended for the installation of uncoupling membranes with ceramic tile, natural stone, porcelain tile, and quarry tile. PROFLEX ® U-SET is designed to be used with PROFLEX ® UCM ® and other uncoupling membrane installations in interior and exterior applications. PROFLEX ® U-SET will meet and exceed ANSI A118.1 PROFLEX ® U-SET provides a more thorough core and tile-setting bond. Advantages:
Item #USET
Packaging: 50 lb. bag
56 bags per pallet
19
PREFORMED NICHE
Preformed Niches, Benches, Seats, and Curbs
PROFLEX ® Preformed Niches, Benches, Seats, and Curbs are a 100% waterproof ready to install lightweight high-density expanded polysterine with a liquid waterproof membrane finish.
Preformed Models and Dimensions
Niche 12” x 12” Square Item #N601
Niche 8” x 8” Soap Item #N609
Niche 8” x 6” & 8” x 12” Narrow Combo Item #N608
Niche 20” x 12” Mega Item #N606
Niche 12” x 6” & 12” x 12”
Seat 23” x 23” x 20” Large Convex Item #B304
Wide Combo Item #N607
Seat 16” x 16” x 20” Triangle Item #B301
Seat 23” x 23” x 20” Triangle Item #B302
Seat 18” x 18” x 20” Small Convex Bench Item #B303
Rectangle Bench 35” x 11.5” x 20” Square Item #B306
Curb 6” x 4.5” x 48” Item #C405
Curb 6” x 4.5” x 60” Item #C409
Custom sizes available
20
PREFORMED NICHE
HYDRA-NICHE PROFLEX® HYDRA-NICHE is a revolutionary product designed to provide a lightweight and waterproof solution for tile and stone bonding. It is a cementitious-coated extruded foam that consists of a high-density, polystyrene foam composite, strengthened with a specialized fiberglass reinforced polymer-infused cementitious surface layer. This unique composition offers a range of benefits that ensure superior performance and durability.
Niche 12” x 12” Square Item #HBN101
Niche 12” x 20” Soap Item #HBN106
Niche 12” x 28”
Narrow Combo Item #HBN107
21
100% WATERPROOF BACKER BOARD
Item #HB12, HB14, HB18
HYDRA-BOARD ® Waterproofing Backer Board
HYDRA-BOARD ® is a lightweight, cementitious-coated extruded foam backer board with a 100% waterproof surface. PROFLEX ® HYDRA-BOARD ® consists of a high-density, polystyrene foam composite, strengthened on both sides with specialized fiberglass reinforced polymer-infused cementitious surface layers. These outer layers allow direct tile and stone bonding mortars to adhere to the surface while having a waterproof barrier underneath. PROFLEX ® HYDRA-BOARD ® is a strong and light board that is perfect for floors, walls, and ceilings. Use as an interior substrate for ceramic tile, stone, slate, and thin-brick veneers in dry, damp, or wet areas. Reduce installation time, labor effort, and save money with this easy-to-cut, backer board which is much lighter than gypsum or cement boards.
Advantages: • Applies to PROFLEX ® System Warranty (Up to Lifetime) • Perfect for all wet rooms • Cuts easily with utility knife or saw • Accepts all types of mortars
Packaging:
5 Sheets Per Carton 16 Cartons Per Pallet 80 Sheets Per Pallet 10 Sheets Per Carton 16 Cartons Per Pallet 160 Sheets Per Pallet 10 Sheets Per Carton 23 Cartons Per Pallet 230 Sheets Per Pallet
1/2”
Coverage:
1/4”
Dimension/Size Coverage 36" x 60" x 1/2" 15 sq. ft. per sheet 36" x 60" x 1/4" 15 sq. ft. per sheet 24" x 48" x 1/8" 8 sq. ft. per sheet
1/8”
Companion product: HYDRA-WELD™
SUPERIOR UV RESISTANCE Multi-Surface Adhesion Mold and Mildew-resistant
Item #HW10
22
WATERPROOFING, SEALANT, AND BONDING COMPOUND
Item #HW10
PROFLEX ® HYDRA-WELD™ is a single-component, silane-modified polymer base, waterproof sealing and bonding compound. It is designed for a wide range of sealing and bonding applications in both interior and exterior settings. This versatile product can be used for waterproofing pipe and valve protrusions, bonding our PROFLEX ® membranes and boards, and adhering building elements such as bathtubs, windows, and door frames. HYDRA-WELD ™ Waterproofing, Sealant, and Bonding Compound
•
Advantages: • Odorless •
Strong bond to various materials • Paintable with most alkyd resins or dispersion paint types • Complies with California Specification 01350 for VOC requirements
Weather- and UV-resistant
•
Solvent-free
Packaging: 9.81 oz (290 ml) cartridges Coverage: Coverage may vary based on application, but an estimated coverage for a 1/4" (6 mm) bead is approximately 30' 1" (9.2 m) per c artridge Note: Cut tip 1/2 to 3/4 of the way down to allow for proper working flow. cut tip 1/2 to 3/4 of the way down to allow for proper working flow. Uses: For uses in commercial buildings, residential housing and other areas requiring positive waterproofing like pools, fountains, spas, hot tubs, kitchens, counter tops, balconies, tub surrounds, shower stalls and pans, under terrazzo, quarry, ceramic and stone tile. This membrane can be installed over any sound substrate, vertically or horizontally, interior and exterior.
23
CRACK-ISOLATION MEMBRANES
Item #KIT
SIM ® CRACK KIT Elastomeric Membrane Kit
PROFLEX ® SIM ® Crack KIT is an elastomeric membrane kit specially designed to be used under approved thinsets, mortars, adhesives, and is typically used to bridge existing cracks up to 3/8” in flooring surfaces. SIM ® Crack KIT is ideal for making small repairs to substrates without the time and expense of applying PROFLEX ® membrane to an entire substrate.
Advantages:
Packaging: 1 Kit Includes: 1 – 18” x 50’ roll of PROFLEX ® SIM ® -40 2 – Quarts of PR11 Interior/Exterior Primer 1 – Primer Applicator Brush
• Ideal for bridging existing cracks in a substrate up to 3/8” • Easy to apply; prime, peel & stick • Install flooring after application with no additional waiting time
Suitable for Use With:
• Concrete • Cured Mortar Beds • Cement Terrazzo • Exterior Grade Plywood • Cement Backerboard • For other substrates, contact technical support.
24
CRACK-ISOLATION MEMBRANES
SIM ® -40
SIM ® -40 is a 40 mil composite underlayment consisting of a rubberized sheet membrane laminated to a high-strength reinforcing fabric on the face and a release sheet on the adhesive side. PROFLEX ® MAXXIM SIM ® -40 is specially designed to be used under approved thinsets, mortars, and adhesives for interior and exterior applications of ceramic tile, stone, and brick, and for interior applications of wood flooring to eliminate the transmission of cracks. Other applications also may be suitable. Contact Technical Support for further information. To eliminate cracks in the finished floorwork, the product should be applied to the entire substrate prior to the installation of the finished flooring. Not recommended around pool decks. Advantages: • Easy and fast to install with standard tools • Ready for tiling immediately after installation • Crack and joint isolation up to 3/8” • Moisture Vapor Protection up to 5#-1000 sq. ft.-24hr CaCl test (see installation instructions) Suitable for Use With: Multi-Ply Engineered Plank, Solid Planks, Bamboo, Plywood, Floating LVT/LVP, Sheet Vinyl, Carpet Tile, Cork and Rubber Flooring, and Tile. Peel & Stick 40 mil. Crack Isolation Membrane
Item #SIM40
Packaging: 1 roll per box, 20 boxes per pallet Coverage: 225 sq. ft. per roll. (SIM ® -40 requires an ANSI A118.11 thinset)
AF-300
Liquid Applied Crack Isolation Membrane
AF-300 (ANTI-FRACTURE 300) is a ready-to-use single-component mold-resistant, liquid-applied, crack-isolation membrane. AF-300 provides a uniform surface with excellent elongation to prevent in-plane cracks up to 3/8” from the substrate to the finished ceramic, porcelain, or stone tile. For residential to heavy commercial applications: interior use only. Advantages: • Low VOC's • Interior use only • Crack isolation up to 3/8" • Cures in 4-6 hours • Apply with a brush, 1” nap roller or trowel • Mold and mildew resistance • Black or White formula Suitable for Use With: Concrete (Poured, prestressed, precast), Cured Mortar Beds, Self-Leveling Compounds, Gypsum Concrete > 3000 psi, Concrete Backer Board, Exterior Grade Plywood, Tile.
Item #AF300B
Packaging: 3 1/2 gallon pail, 48 pails per pallet. Coverage: 300 sq. ft. per pail.
25
CRACK-ISOLATION MEMBRANES
HYDRA-SEAL ® Waterproofing and Crack Isolation Membrane HYDRA-SEAL ® is a thin, load-bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, HYDRA-SEAL ® provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.). Advantages: • Interior or Exterior • Built-in antimicrobial for mold and mildew resistance at the substrate • Initial cure in 2-4 hours (70° F, 50% R.H.), foot traffic in 4 – 6 hours • Easy to use, can be applied by trowel, airless sprayer, paint brush, or roller • Crack Isolation up to 1/4” • Adheres to all common surfaces • Thin section that does not interfere with elevations • Exceeds ANSI A118.10 and A118.12 membrane requirements • May be turned up for base flashing and applied to walls for wainscot or shower wall application. • Compliant with the Uniform Plumbing Code (UPC) Uses : For uses in commercial buildings, residential housing, and other areas requiring positive waterproofing like pools, fountains, spas, hot tubs, kitchens, counter tops, balconies, tub surrounds, shower stalls and pans, under terrazzo, quarry, ceramic and stone tile. This membrane can be installed over any sound substrate, vertically or horizontally, interior and exterior. Coverage:
Item #HS5, HS1, and HS1W
Item #HSF 6x50 HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll
Packaging : 5 gallon pail, 36 per pallet. (Item #HS5, HS5W) 1 gallon pail, 4 per case, 45 cases per pallet. (Item #HS1 and HS1W)
Single coat crack isolation application 1-gallon-80 sq. ft. at 30-35 mils wet film thickness Two-coat waterproofing applications 1-gallon-50 sq. ft. at 40-45 mils wet film thickness
HYDRA-LOCK ® Waterproofing and Crack-Isolation Membrane HYDRA-LOCK ® is a thin, load-bearing, crack-suppression, waterproof membrane. That exceeds ANSI A118.10 and ANSI A118.12 requirements. The material is installed in a semi- fluid state and can be applied to most shapes or irregular forms such as base Advantages: • Interior or exterior applications • Single-component, cold applied • Rated extra heavy duty • Dries Overnight • Non-Flammable • Available in Black or White flashings, walls, etc. Uses: PROFLEX ® HYDRA-LOCK ® is for use in areas requiring waterproofing and/or crack- suppression for tile and stone applications such as showers, pool areas, or steam rooms.
Item #HL3
Coverage: Single coat crack isolation application 1-gallon-80 sq. ft. at 30-35 mils wet film thickness Two-coat waterproofing applications 1-gallon-50 sq. ft. at 40-45 mils wet film thickness
Packaging: 3.5-gallon pail
Item #HSF 6x50 HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll
26
CRACK-ISOLATION MEMBRANES
Item #HM2P
HYDRA-MAX™ Waterproofing and Crack-Isolation Membrane
PROFLEX ® HYDRA-MAX™ is an innovative 2-component, fast-curing, textured hybrid urethane waterproofing coating designed to enhance concrete foundations, wet areas, and roofs. The hybrid urethane formulation incorporates high-grade fillers, resulting in a textured surface that promotes strong tile adhesion to the cured waterproofing layer. PROFLEX ® HYDRA-MAX™ exhibits remarkable adhesion properties across diverse substrates, making it well-suited for application on damp and wet surfaces.
Advantages: •
Packaging : Part A: 4.5 gallons Part B: .5 gallons
Crack isolation and bridging Polymer fortified formulation
• • • •
Can be used in tile and wood flooring application (interior only) Can be applied over wet substrates
Coverage: 5 Gallons yields approximately 137.8 sq. ft. in two coats waterproofing application. Apply each single coat layer at a coverage rate of 13. 6 sq. ft./gal., wet 20-25 mils. Rough or very porous surfaces will decrease coverage.
Interior and exterior use
Uses: PROFLEX ® HYDRA-MAX ® is for use in areas requiring waterproofing and/ or crack suppression for tile and stone applications such as showers, pool areas, or steam rooms.
27
MULTI-PURPOSE SEALER & PRIMER
SP1 Multipurpose Sealer/Primer is a pure acrylic-based, solvent-free product with multiple uses. SP1 may be used as a bonding agent with other PROFLEX ® surface preparation products, modified mortars, adhesives, and membranes when adhering to difficult substrates such as gypsum-based concrete, epoxy coatings, VCT, non-cushioned sheet vinyl, glazed tile, terrazzo, glass, and metal. SP1 can also be used to prime metal and resin-backed tile to allow for modified mortar installation. *SP1 can also be used to encapsulate old adhesive residue, (including cut-back asphalt adhesive residue). SP1 Multi-Purpose Sealer & Primer
PACKAGING
COVERAGE
Item #SP1
Sealer/Primer: 410 sq. ft. w/long nap roller, brush, or spray application. *Coverages are approximate.
1-gallon pail 4 per case 45 cases per pallet
PRIMERS FOR SELF-ADHERED MEMBRANES
GP1 is a specially formulated primer for use with PROFLEX ® elastomeric membranes over gypsum concrete. Depending on application type and substrate porosity, the primer will dry within in 20 – 45 minutes. GP1 Interior Gypsum-Based Primer
PACKAGING COVERAGE
400 sq. ft. per gallon w/ long nap roller, brush, or spray application. *Coverages are approximate.
1-gallon pail 4 per case 45 cases per pallet
Item #GP1
PR11 primer is a required companion product to be used with the PROFLEX ® series of elastomeric membranes. PR11 primer is designed to condition and prepare a substrate for the application of PROFLEX ® membranes. PR11 Interior & Exterior Primer
PACKAGING COVERAGE 1-gallon pail, 4 per case, 45 cases per pallet 5-gallon pail, 36 per pallet 300-500 sq. ft. per gallon w/long nap roller, brush, or spray application. *Coverages are approximate.
Item #PR11
PR27 is a required companion product to be used with the PROFLEX ® series of elastomeric membranes. PR27 is a solvent based product designed specifically for exterior applications where conditions of higher relative humidity (RH) exist. PR27 Solvent Based Exterior Primer
PACKAGING COVERAGE
300-500 sq. ft. per gallon w/long nap roller, brush, or spray application. *Coverages are approximate.
1-gallon pail, 4 per case, 45 cases per pallet
Item #PR27
PR29NF Interior & Exterior Primer, Non-Flammable Formula
PR29NF is a required companion product to be used with the PROFLEX ® series of elastomeric membranes. PR27NF primer is a non-flammable, tacky, specialized emulsion-polymer product designed specifically for Interior and Exterior applications. Primer will dry within 20 – 45 minutes, depending on application type and substrate porosity.
PACKAGING COVERAGE
300-500 sq. ft. per gallon w/long nap roller, brush, or spray application. *Coverages are approximate.
4 jugs per case 48 cases per pallet
Item #PR29NF
28
SOUND CONTROL
PROFLEX ® provides innovative products engineered for crack suppression, sound reduction, moisture control and waterproofing applications that are commonly found in today’s building and remodeling industries. PROFLEX ® Elastomeric self-bonding membranes are composite underlayments consisting of petroleum and rubber based materials laminated to a high-strength reinforcing facer fabric. The products have excellent strength and elongation properties designed to be used in a variety of building and remodeling applications.
PROFLEX ® Products, Inc.
877-577-6353
proflex.us
29
UNDERSTANDING SOUND CONTROL
Working With ASTM Test Numbers The STC, FSTC, IIC, ∆IIC, and FIIC test results are expressed as a single dB (decibel) value. The value is the result of calculations across a full range of sound frequencies starting at 63 hertz up to 5,000 hertz. Higher dB values indicate better sound reduction. Since these are logarithmic calculations, increases from 40dB to 45dB are easier to achieve than increases from 50dB to 55dB, or 60dB to 65dB. The Sound Transmission Class (STC) value of a floor assembly is primarily a function of mass. For example, an eight inch concrete slab will be better than a six inch concrete slab for reducing sound transmission. The impact sound transmitted by a floor is a function of how well it absorbs sound vibration caused by an impact. This is measured as the Impact Insulation Class or IIC. Carpeting is the best impact absorber, wood less, and ceramic tile or marble the least absorbing. Think about dropping an object on the finished floor like a wine glass. The Delta IIC measures the impact insulation class improvement for a specific “total” floor assembly. This test is only performed on a six inch concrete slab without a ceiling assembly. The result for the tested floor assembly (underlayment materials and the finished floor surface) is compared with the “bare” six inch concrete slab IIC value. In order to understand the IIC improvement, you need to know the finished flooring surface as well as the sound underlayment and adhesives used in the floor assembly tested. Most important, Delta IIC values are NOT additive. For example, if the underlayment material claims a ∆IIC of 15dB and a thinset or adhesive manufacturer claims a ∆IIC of 10dB, having both in the same floor assembly will not result in an IIC improvement of 25dB. Make sure you know how the product was testing, including the finished flooring and other floor assembly components. Field testing is an excellent way to establish the Field Sound Transmission Class (FSTC) or Impact Insulation Class (FIIC) of a specific floor assembly and building. The result is specific to the tested room and should not be used to grade or measure a particular component (underlayment, adhesive, thinset, etc.). Laboratory sound testing is conducted in a controlled environment and field testing is not. As a result, field test results can be misleading. The specific construction, temperature, humidity, or room content can influence the result. For example, was a perimeter isolation barrier material used to isolate the room? Was the air conditioning on or off? Was anything in the room like drapes or furniture, etc. Ranking Finished Flooring Surfaces In general, hard surface flooring, those with greater mass density (weight) provide better sound transmission values (STC), that is, they are better at reducing ambient sound between rooms. And Soft Surface flooring materials provide better impact sound reduction or IIC values.
There are two general classifications of sound or noise: Ambient noise, or airborne sound includes conversation, television, radio, dog barking, etc. This type of sound is measured by its Sound Transmission Class. (STC) Impact sound is the resulting vibration or noise created when objects collide with the flooring surface, such as heels when walking or running on the floor, dropping items on the floor, a bouncing ball, dragging a chair across the floor, etc. This type of sound is measured by its Impact Insulation Class. (IIC) Key Factors of Floor Sound Performance: The sound performance of a floor/ceiling assembly in a building is the result of 5 key components of the structure. These construction components will dictate the underlayment product and associated materials specified. 1. Sub-Floor Construction – This could be concrete slab at various thicknesses (for example, 6 inches or 8 inches thick), wood joist and wood truss systems, or a combination structure of concrete, metal & wood. 2. Finished Flooring – Ranges from hard surface flooring like ceramic tile, stone, marble, and natural wood, to soft surface flooring like carpet and luxury vinyl tile. 3. Ceiling Type – Concrete slab construction could have no ceiling included, a ceiling system attached directly to the bottom of the slab, or a suspended ceiling. Suspended ceilings are generally either gypsum board with plaster or “architectural” ceiling board held in place with a metal grid system. Wood joist and truss systems would include a ceiling unless it is “open” beam construction. 4. Air Plenum – Is the space created by the ceiling attached to the sub- floor structure. The depth of the air plenum and its use, such as to include insulation material, recessed lighting, electrical wiring, HVAC duct work, etc. determines its value in reducing sound. 5. Isolating the Room – This is a critical construction component often overlooked. Perimeter Isolation Barrier (PIB) material and sound absorbing caulking should be used to prevent sound “flanking” around the floor assembly. Also, adhesives are better than using nails or screws which will transmit sound through the floor assembly. So as the architect, contractor, owner/user of the room, each step in the process of creating the specific condominium, office, home impacts the sound reducing and insulating performance of the total floor assembly. How is the building designed? How did the contractor build/install the components? What finished flooring was selected by the designer/ decorator/end user? ASTM International (ASTM) ASTM International was organized in 1898, and is one of the largest voluntary standards development systems in the world. ASTM stands for American Society for Testing and Materials. ASTM International is a not-for-profit organization which provides a forum for producers, users, ultimate consumers, and those having a general interest (representatives of government and academia) to meet on common ground and write standards for materials, products, systems and services. ASTM has developed the standards for sound testing of floor systems. ASTM Tests for Floor Assembly Sound Performance Sound testing can be done in an approved laboratory or in the field (on site). Laboratory testing is the most un-bias measurement of flooring systems and products. The laboratory test results provide an excellent way to evaluate, compare and select materials. Field tests provide sound measurement of specific rooms or floor assemblies, but are unique to the test location and not suitable for comparing products and materials.
Hard Surface Flooring •
Natural Stone and Marble Ceramic, Quarry & Porcelain Tiles
• •
Hardwood
Intermediate Range •
STC – Sound Transmission Class (ASTM E 90) IIC – Impact Insulation Class (ASTM E 492) ∆IIC – Delta Impact Insulation Class (ASTM E 2179) FSTC – Field Sound Transmission Class (ASTM E 336) FIIC – Field Impact Insulation Class (ASTM E 1007)
Laminates with foam backing
•
Floating Floors
Soft Flooring •
Vinyl with foam backing Luxury Vinyl Tile & Planks
• •
Note: ASTM test procedures are periodically updated and the last update is listed after the test number, for example ASTM E 90-04 where the 04 means this test procedure’s latest update or change was in 2004.
Carpet
30
Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108Made with FlippingBook Online newsletter maker