WATERPROOFING
WITH FASTER CURE!
Item #HS1, HS5, HS1W
HYDRA-SEAL ® Waterproofing and Crack Isolation Membrane
Advantages: • HYDRA-SEAL ® is a thin, load-bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, HYDRA-SEAL ® provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.). Packaging: 5-gallon pail, 36 per pallet. (Item #HS5) Interior or Exterior Use
•
Built-in antimicrobial for mold and mildew resistance at the substrate
1-gallon pail, 4 per case, 45 cases per pallet. (Item #HS1) 1 roll mesh fabric for horizontal to vertical transitions, 6” x 50’ Coverage: Single coat crack isolation application. For waterproofing applications- Two-coat applications. 50 sq. ft. per gallon For crack isolation applications-80 sq. ft. per gallon. Coverage is an approximate, actual rates may vary based on the porosity of substrates
• Initial cure in 2-4 hours (70° F, 50% R.H.), foot traffic in 4 – 6 hours • Easy to use; can be applied by trowel, airless sprayer, paint brush or roller • Crack Isolation up to 1/4” • Adheres to all common surfaces • Thin section that does not interfere with elevations • Exceeds ANSI A118.10 and A118.12 membrane requirements • May be turned up for base flashing and applied to walls for wainscot or shower wall application. • Compliant with Uniform Plumbing Code (UPC)
Color: White or Black
HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll/16 rolls per case
Item #HS1W
Item #HSF 6x50
16
Made with FlippingBook Online newsletter maker