CRACK-ISOLATION MEMBRANES
HYDRA-SEAL ® Waterproofing and Crack Isolation Membrane HYDRA-SEAL ® is a thin, load-bearing membrane composed of a modified elastomeric copolymer. With excellent elongation properties and high strength, HYDRA-SEAL ® provides a 100% waterproof membrane coating while limiting the transfer of substrate cracks to the finished overlay. The membrane is installed in a liquid state and can be applied to practically any form or irregular shape (i.e. base flashings, parapets, walls, etc.). Advantages: • Interior or Exterior • Built-in antimicrobial for mold and mildew resistance at the substrate • Initial cure in 2-4 hours (70° F, 50% R.H.), foot traffic in 4 – 6 hours • Easy to use, can be applied by trowel, airless sprayer, paint brush, or roller • Crack Isolation up to 1/4” • Adheres to all common surfaces • Thin section that does not interfere with elevations • Exceeds ANSI A118.10 and A118.12 membrane requirements • May be turned up for base flashing and applied to walls for wainscot or shower wall application. • Compliant with the Uniform Plumbing Code (UPC) Uses : For uses in commercial buildings, residential housing, and other areas requiring positive waterproofing like pools, fountains, spas, hot tubs, kitchens, counter tops, balconies, tub surrounds, shower stalls and pans, under terrazzo, quarry, ceramic and stone tile. This membrane can be installed over any sound substrate, vertically or horizontally, interior and exterior. Coverage:
Item #HS5, HS1, and HS1W
Item #HSF 6x50 HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll
Packaging : 5 gallon pail, 36 per pallet. (Item #HS5, HS5W) 1 gallon pail, 4 per case, 45 cases per pallet. (Item #HS1 and HS1W)
Single coat crack isolation application 1-gallon-80 sq. ft. at 30-35 mils wet film thickness Two-coat waterproofing applications 1-gallon-50 sq. ft. at 40-45 mils wet film thickness
HYDRA-LOCK ® Waterproofing and Crack-Isolation Membrane HYDRA-LOCK ® is a thin, load-bearing, crack-suppression, waterproof membrane. That exceeds ANSI A118.10 and ANSI A118.12 requirements. The material is installed in a semi- fluid state and can be applied to most shapes or irregular forms such as base Advantages: • Interior or exterior applications • Single-component, cold applied • Rated extra heavy duty • Dries Overnight • Non-Flammable • Available in Black or White flashings, walls, etc. Uses: PROFLEX ® HYDRA-LOCK ® is for use in areas requiring waterproofing and/or crack- suppression for tile and stone applications such as showers, pool areas, or steam rooms.
Item #HL3
Coverage: Single coat crack isolation application 1-gallon-80 sq. ft. at 30-35 mils wet film thickness Two-coat waterproofing applications 1-gallon-50 sq. ft. at 40-45 mils wet film thickness
Packaging: 3.5-gallon pail
Item #HSF 6x50 HYDRA-Mesh fabric is used for horizontal and vertical transitions. 6” x 50’ ft roll
26
Made with FlippingBook Online newsletter maker