POLYMER-MODIFIED MORTAR
PROFLEX ® PRO-STICK ® 42R (ANSI A118.11) is a rapid set thinset mortar that is formulated to be a fast setting mortar with superior performance and workability characteristics. PRO- STICK ® 42R, when mixed, has an initial setting time of 1 hour. Specially developed for the professional tile installer. For commercial and residential use. Advantages: • Ready to mix product, no need for additives • High strength for a variety of bonding applications • 1 hour intial set, 2-4 hours for foot traffic • ANSI A118.4 and ANSI A118.11 compliant Uses: For installation of: Ceramic tile, pavers, quarry tile, porcelain tile, clay bodied tile. For installation over: Tile backerboard, plumb and true masonry, exterior grade plywood, properly cured and finished concrete, gypsum plaster, gypsum block or gypsum board (dry areas-walls only), cured Portland cement mortar, masonry surfaces. PRO-STICK ® 42R ANSI A118.11 Multi-Purpose Rapid Set Tinset Mortar
Item #PS42R
25 lb. bag, 96 bags per pallet Available in White and Gray Packaging:
Shear Strength
7 Days (psi)
28 days (psi)
Mosaic Tile Quarry Tile Glazed Wall
300-350 300-350 400-450
350-400 450-500 450-500
Coverage:
1/2” x 1/2” x 1/2" Square Notch Trowel
Compressive Strength Quarry Tile to Plywood
4000-4500 175-200
6000-6500 200-250
20-25 sq. ft.
Adjustability Open Time Initial Set
15-20 minutes
1/4” x 3/8” x 1/4” Square Notch Trowel
30 minutes 90 Minutes 60 minutes
35-40 sq. ft.
Final Set
PROFLEX ® PRO-STICK ® 50 is a latex modified, Large Heavy Tile (LHT) mortar composed of sand, cement, and resins used to adhere a variety of tile, natural stone, marble, and granite, to approved substrates. Specially formulated to hold large format tiles and stone in place on vertical surfaces, and reduces unevenness caused by setting tile on horizontal surfaces. PRO- STICK ® 50 is applied in thickness from 3/16 to 3/4 inches to adhere marble, granite, and tile, to plaster, drywall, concrete, and masonry surfaces. Designed to set tiles vertically of up to 5 lbs. per sq. ft. (Larger sized units must be field tested to determine suitability). Advantages: • Non-sag formula supports heavy tile and ungauged natural stone • For interior & exterior applications • ANSI A118.4 and ANSI A118.11 compliant Uses: For installation of: Ceramic tile, pavers, quarry tile, porcelain tile, clay bodied tile. For installation over: Tile backerboard, exterior grade plywood, plumb and true masonry, properly cured and finished concrete, gypsum plaster, gypsum block or gypsum board (dry areas-walls only), cured Portland cement mortar, masonry surfaces. PRO-STICK ® 50 ANSI A118.11 Premium Large Heavy Tile (LHT) Mortar
Item #PS50
50 lb. bag, 56 bags per pallet Available in White and Gray Packaging:
Coverage:
3/4” x 9/16” x 3/8” Square Notch Trowel
7 Days (psi)
28 days (psi)
Shear Strength
34-38 sq. ft.
350-400 550-600 450-500
Mosaic Tile Quarry Tile Glazed Wall
250-300 250-300 400-450
1/2” x 1/2” x 1/2" Square Notch Trowel
40-50 sq. ft.
6000-6500
Compressive Strength
4000-4500 15 minutes 60 minutes 6-8 hours
Adjustability Open Time
1/4” x 3/8” x 1/4” Square Notch Trowel
70-80 sq. ft.
Final Set *Coverages are approximate.
43
Made with FlippingBook Online newsletter maker