POLYMER-MODIFIED MORTAR
PRO-STICK ® 42 XLT ANSI A118.11 Extra Large Format Tile Mortar
PROFLEX ® PRO-STICK ® 42 XLT is a one step polymer-modified Portland cement setting adhesive for installing extra large format porcelain, ceramic tile and natural stone on both walls and floors. PRO-STICK ® 42 XLT with its unique properties can be used as a thin or medium bed setting mortar for installing large format, ceramic, porcelain and irregular thickness stone. Advantages: • ANSI A118.4, ANSI A118.11, and ANSI A118.15 compliant • May be used around, pools, fountains, or submersible conditions (Contact Technical Support for more information)
• Extended open time and working time • Ready to mix, no need for additives • High strength for a variety of applications Uses:
50 lb. bag, 56 bags per pallet Available in White and Gray Packaging: Coverage: Item #PS42XLT
PRO-STICK ® 42 XLT is ideal for use in installations of extra large oversize ceramic tile and natural stone for both walls and floors in both interior and exterior applications. It is recommended for use for absorptive, semi vitreous, vitreous tile and impervious ceramic tile such as porcelain tile and natural stone over properly prepared masonry, concrete, cement backer board, membranes and existing ceramic tile. For interior dry areas, it is suitable for properly prepared gypsum board and exterior grade plywood substrates. PRO-STICK ® 42 XLT is suitable for both residential and commercial construction. It is recommended for use in the thinset installation method for vitreous tiles like porcelain over low or non-absorptive subfloors, and membranes.
1/4” x 3/8” x 1/4” Square Notch Trowel
Large Tile, Marble, Stone
55-65 sq. ft.
Properties ANSI A118.4
1/2” x 1/2” x 1/2” Square Notch Trowel
Quarry Tile, Rough Stone
35-45 sq. ft.
ANSI Requirements
PS 42 XLT Results
Glazed Wall Tile, 48 hour shear
> 100 psi
> 260 psi
1/4” x 1/4” x 1/4” Square Notch Trowel
Impervious Mosaic, 28 day shear
> 200 psi
> 480 psi
65-75 sq. ft.
Ceramics
LEED ® v4
EQ Credit 4.1
PS 42 XLT Results
VOC
< 0.5 mg/m3
Complies
MASTICS
PRO-STICK ® 35 Ready to Use Type 1 Mastic
PROFLEX ® PRO-STICK ® 35 Type 1 Mastic can be used for installing ceramic, porcelain, natural stone, quarry and mosaic tile on interior floors and walls. Recommended for floor applications with tile up to 8” x 8” and wall applications with tile up to 12” x 12”. PS35 meets ANSI A136.1 Type I and II specifications, spreads easily, and is easy to clean up. Advantages: • Tile up to 12” x 12” on walls, 8” x 8” on floors
• Mold and mildew-resistant • Pre-mixed/Spreads easily • Easy to use, easy to clean-up • Freeze thaw stable (3 cycles) Uses:
PRO-STICK ® 35 can be used for setting ceramic floor and wall tiles for residential and light commercial applications. It is also ideal for countertops, backsplashes, tub and shower surrounds over precast shower bases where requirements do not exceed those of ANSI A136.1 PRO-STICK ® 35 can be used for interior applications for ceramic tile to walls maximum 12” x 12” (20cm x 20cm) and ceiling tiles up to 6” x 6” (15cm x 15cm). Floor tiles not to exceed 8” x 8 ” (15cm x 15cm).
Item #PS35 and PS35 1
Packaging: 1 gallon plastic pail (3.78 L) 3.5 gallon plastic pail (13.24 L) Available in White Coverage:
Technical Data
Results
Tile Size
Trowel Size
1 Gallon (3.78 L)
3.5 Gallon (13.24 L)
3/16” x 5/32 (4.5 x 4 mm) V-Notch Trowel
Open Time Drying Time
40-45 minutes
Up to 6” x 6” (150 x 150 mm)
27-32 (2.5-3.0)
95-112 (8.8-10.4)
24-48 hours Off White
Color
1/4” x 1/4” x 1/4” (6 x 6 x 6 mm) SQ-Notch
Walls: 6” x 6”-8” x 8” (150 x 150 mm-203 x 203 mm) Floors: 6” x 6”-8” x 8” (150 x 150 mm-200 x 200 mm)
18-23 (1.7-2.1)
63-81 (5.9-7.5)
45
*Coverages are approximate.
Made with FlippingBook Online newsletter maker