88
Using with FlexiLED - 0BA tunable - white
On Controller
2pcs BLACK are pos +ve wires and 1pce connects to RED of 1pce reel FlexiLED (there are TWO BLACK pos +ve wires for connecting one each to 1pce reel FlexiLED) 1pce WHITE is neg – ve and connects to WHITE of 1 or 2pcs (max) reels FlexiLED and controls the white LEDs 1pce YELLOW is neg — ve and connects to YELLOW of 1 or 2pcs (max) reels FlexiLED and controls the warm - white LEDs
On FlexiLED Red = pos +ve White = white LED neg – ve Yellow = warm - white LED neg – ve
1pce controller with remote handset plus 200W 24V DC LED driver will operate up to 2pcs reels FlexiLED - 0BA tunable - white (5metres each and in parallel) Use the 4pcs wire nuts supplied with each controller to connect the FlexiLED to the controller
LED controller
Output (W) max
Load (A) max
Input (V DC)
Features
IP
Warranty (years)
Product
R05 2CH dual - colour tunable - white inline dimmer with remote handset
Short - circuit protection Over - current protection Over - temperature protection Auto recover from fault Connection via flying leads Max range 10metres line - of - sight Handset uses 1pce CR2025 coin battery, supplied
24
170
7
20
1
R05 is a 2 - channel dual - colour RF LED 24V 6A max remote handset and inline dimmer / controller
Our Design Guide is for reference only and the ideal appearance should be checked with a lit trial | Dimensions in millimetres | Data subject to our Terms and Conditions and are liable to change without notice | E&OE | © OSHINO 27 - 03 - 2023
Oshino Lamps (UK) Limited
Tel 0115 964 1305 | sales@oshino.co.uk | www.oshino - lamps.co.uk
88
Made with FlippingBook Digital Proposal Creator