M60 Master – Crown Paints Master M60 Specification – M60 Master
760E Existing decking treated 1. NOTE: Sadolin Decking Oil is only suitable for use on bare or previously oiled decking 2. First coat: Apply liberally in direction of grain, avoid puddles. Leave to dry 3. Subsequent coats: As required to satisfy surface porosity. 4. Pay special attention to freshly sawn ends of decking boards and ensure treatment with a suitable preservative before applying Sadolin Decking Oil 770 External doors 1. Bottom edges: Prime and coat before hanging doors. 780 Bead glazing to coated wood 1. Before glazing: Apply first two coats to rebates and beads. 780A Bead glazing- new wood 1. Before glazing: Apply full system to rebates and beads. 790 Linseed oil putty glazing 1. Setting: Allow putty to set for seven days. 2. Sealing 2.1. Within a further 14 days, seal with a solvent-borne primer. 2.2. Fully protect putty with coating system as soon as it is sufficiently hard. 2.3. Extend finishing coats on to glass up to sight line. 790A Glazing sealant 1. Putty glazing is NOT recommended with Sadolin woodcare systems 2. Glaze using a sealant in accordance with Section 4.2 of Glazing Federation manual. 2.1. Refer to BS 8000-7: and BS 6262.
Specification created using NBS Chorus
104
Made with FlippingBook - Online magazine maker