M60 Master – Crown Paints Master M60 Specification – M60 Master
176D Protective coating gloss paint 1. Description: Exterior- new galvanised- 15 year 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Protective Coatings High Performance Gloss for Metal 3. Surfaces: New galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions). Apply Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat 4.1. Number of coats: ONE & ONE 5. Undercoats: Crown Trade Protective Coatings High Build Micaceous Iron Oxide to all areas 5.1. Number of coats: ONE 6. Finishing coats: Crown Trade Protective Coatings High Performance Gloss for Metal 6.1. Number of coats: TWO 176E Protective coating micaceous iron oxide paint 1. Description: Exterior- new or pre-primed ferrous/non-ferrous metal- excluding new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Protective Coatings High Performance High Build Micaceous Iron Oxide 3. Surfaces: New ferrous & non-ferrous metal, excluding new galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat 4.1. Number of coats: ONE 5. Finishing coats: Crown Trade Protective Coatings High Performance High Build Micaceous Iron Oxide 5.1. Number of coats: TWO 176F Protective coating micaceous iron oxide paint 1. Description: Exterior- new galvanised 2. Manufacturer: Crown Trade from Crown Paints 2.1. Product reference: Crown Trade Protective Coatings High Performance High Build Micaceous Iron Oxide 3. Surfaces: New galvanised 3.1. Preparation: All surfaces should be clean, sound, dry and free from any materials that could affect the adhesion of the materials to be applied. Refer clauses 400-740A as appropriate 4. Initial coats: Pre-treat all cleaned bright galvanising with Crown Trade Protective Coatings T- Wash (as manufacturer’s instructions). Apply Crown Trade Protective Coatings High Build Rust Inhibiting Primer Undercoat 4.1. Number of coats: ONE & ONE 5. Finishing coats: Crown Trade Protective Coatings High Performance High Build Micaceous Iron Oxide 5.1. Number of coats: TWO
86
Made with FlippingBook - Online magazine maker