4.7 M anoMeter
Locate manometer on booth where it can be read daily by paint department.
Install close to exhaust filter wall to keep tubing length to a minimum. Excess tubing length will reduce accuracy of manometer. High port will connect to work chamber, and low port will connect to chamber on suction side of filter grid.
1. Drill hole in booth wall just large enough for plastic hose barb to fit through (approx. 13/32). Install washer and nut on back side. Do not over tighten.
2. Mount manometer on booth wall and ensure it is level using bubble level on manometer. Manometer must be level or it will not be accurate. Bottom mounting hole is slotted for easy level adjusting.
Made with FlippingBook - professional solution for displaying marketing and sales documents online