Look, doc: no hands!
VistaPure’s patented AutoFill accessory replenishes SciCan STAT IM ® autoclaves with distilled-quality water automatically—enabling truly hands-free convenience. VistaPure AutoFill accessory kits work with all VistaPure systems and can be installed easily on any STAT IM 2000S/G4 or 5000S/G4 in just a few minutes!
No more purchasing and storing distilled water
No more spills while filling autoclaves manually
No more cycle-fault errors caused by forgetting to fill reservoirs
No more staff time spent filling autoclaves = more time with patients
AutoFill for STAT IM S3020
VistaPure AutoFill Installation
A 12-foot length of clear polyurethane tubing is already attached to the AutoFill manifold. If the desired distance between the connection to the VistaPure and the autoclave is greater than 12 feet, simply order a longer length of the clear polyurethane tubing, as the distance from the VistaPure to the autoclave is not limited, except by the feed tubing.
Installing AutoFill on a STAT IM The VistaPure AutoFill for STAT IM device (S3020) can be installed on any new or older model 2000S/G4 or 5000S/G4 STAT IM autoclave as follows:
Manual Autoclave Wand
AutoFill Manifold & Float
Shut-O Valve
Flow Control
Tee
VistaPure
STAT IM
Distributed by: SciCan Ltd. 1440 Don Mills Road North York, ON M3B 3P9 / Canada T +1 416 445 1600 TF +1 800 667 7733 customerservice@scican.com
VistaPure and AutoFill are manufactured by: Crosstex International, Inc. 1733 W. Parkside Lane Phoenix, AZ 85027 / USA TF +1 800 531 2221 VistaResearchGroup.com
www.scican.com
STAT IM is a registered trademark of SciCan Ltd. VistaPure and AutoFill are trademarks of Crosstex International, Inc., Phoenix, AZ.
Page 1Made with FlippingBook interactive PDF creator