VistaCool ™ 3 Direct-to-Drain Thermal Reduction System for Autoclave Wastewater
Eliminates the need for autoclave condenser bottles by cooling sterilizer wastewater and sending it directly down the drain automatically.
Protects Cabinets Helps prevent mold, mildew, rot and rust caused by spills and humid environments created by exhaust from condenser bottles. Protects Staff Eliminates the need for office staff to empty hot water bottles manually.
Protects Drains Prevents autoclave wastewater from damaging plumbing. Built-in backflow prevention meets or exceeds local plumbing codes. Saves Time Non-electric, self-regulating system saves staff time—there’s no user maintenance required!
Coolant overflow always at 12 o’clock
Acceptible Positions
90º
If installed horizontally, coolant overflow port must be UP in 12 o’clock position
Install anywhere. The innovative design of the new VistaCool 3 provides all the same benefits as its predecessors, while occupying less space. The system’s included mounting clips and pressurized drain line enable it to be installed vertically or horizontally in almost any location.
System Specifications
17”
13.75”
15”
3.5”
5.75”
4”
3.5”
10.75”
13”
V7601 - For one autoclave
V7501- For one autoclave
V7502 - For two autoclaves
Note: Optional, adjustable tank stands raise the installed height of V7501 & V7502 models between 1/2” and 5” in half-inch increments. Order S7545 for V7501; order S7547 for V7502.
Installation Requirements 1/4” connection to cold water supply: Supply fittings, water supply valve, cold water feed line and CSA-certified VistaCheck™ Dual Check Backflow Preventer(s) are all included! Air gap accessory available separately if required by local code authorities. Inline thermal sensor(s) included to ensure wastewater is cool enough to send directly down the drain. To be connected to WaterMark non-return valve according to local authorities (not supplied).
Recommended Accessories
VistaPure ™ Water Filtration
VistaPure ™ AutoFill Replenish any new or older-model STAT IM autoclave with distilled-quality water automatically, enabling truly
Provides two grades of high-quality water for autoclaves, dental bottles, ultrasonic cleaners and the rinse cycle of instrument washers. V3000
hands-free convenience. S3020 - AutoFill for STAT IM
Distributed by: SciCan Ltd. 1440 Don Mills Road North York, ON M3B 3P9 / Canada T +1 416 445 1600 TF +1 800 667 7733 customerservice@scican.com
VistaPure and VistaCool are manufactured by: Crosstex International, Inc. 1733 W. Parkside Lane Phoenix, AZ 85027 / USA TF +1 800 531 2221 VistaResearchGroup.com
www.scican.com
STAT IM is a registered trademark of SciCan Ltd. VistaPure and VistaCool are trademarks of Vista Research Group.
Page 1 Page 2Made with FlippingBook - Online magazine maker