CONTROL PANELS
56
UL and ETL Listed Control Panels A control panel is an all-inclusive means of controlling your booth. It comes pre- wired with a main disconnect switch, class 10 motor protector, light contactor and fuse protection. The independent toggle switches allow for separate control of your fan and lights. Control panels are UL 508a-listed and can also be ETL-listed. Features & Options • Control panels can be set up for almost any voltage, phase and HP configuration. The standard fuse protection allows for up to 15 amps of light fixtures and additional circuits can be added to control up to 45 amps of light fixtures. Control panels can be set up to operate paint mix rooms where continuous mechanical ventilation is required by NFPA 33. • The included field wiring terminal block simplifies the wiring to optional devices such as door limit switches, filter alarms and compressed air solenoid. Fire suppression interlock is included as a safety feature so the fan turns off in case of a fire alarm. • The included KT7 series motor controller offers maximum motor protection. Every KT7 device is individually calibrated for the lowest and highest current it can handle. When coupled with the automatic ambient temperature compensation over a range of -25C to +60C, very accurate thermal overload protection is obtained. Excellent short circuit protection of up to 65kA at 480V and up to 47kA at 600V is also achieved. Magnetic Motor Starters Motor starters are our most basic and cost-effective option to easily operate the fan on your booth. The motor starter is pre-wired in a NEMA 1 enclosure. It is equipped with an adjustable solid-state overload relay and a 4 pole 23 amp contactor. For a UL-listed option, see our line of standard control panels with additional features. Features & Options • Motor starters can be set up for just about any voltage, phase and HP configuration needed for your application. • Optional light contractor available. The motor starter can be a complete economical control solution for your booth. Independent toggle switches allow the lights and fan to be controlled separately. • Paint Mix Room Compatible. A paint mix room is required to have continuous mechanical ventilation. Our motor starters can be configured to allow the fan to run at all times while still offering a switch for light fixtures.
Standard Control Panel
Basic Motor Starter
Follow us on:
2975 Discovery Blvd, Rockwall, TX 75032 | Toll-Free 888-452-6684 | eFax (972) 408-0881 | Email sales@rttsolutions.com | www.rttsolutions.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online