5000
HIGH EFFICIENCY RP ARRESTORS W-SERIES
OVERVIEW
The 5000 RP W-Series family of paint arrestors is designed with six layers of expanded paper creating an alternating labyrinth upstream of a polyester backing. The construction of the 5000 series allows for minimal initial resistances while still maintaining a high level of capture efficiency. The 5000 series arrestor can be used in a wide variety of applications. Best performance is when coating have a slightly tacky or wet overspray. The 5000 series is available in pad and roll form.
Model: 5000 Series W-Series High Efficiency RP Arrestor RP Part #: W5000 Single Layer (20”x20”) Number of pads in series: 1 PAINT ARRESTOR IDENTIFICATION 5000 W-SERIES HIGH EFFICIENCY RP ARRESTORS
OVERVIEW: The 5000 RP W-Series family of paint arrestors is designed with six layers of expanded paper creating an alternating labyrinth upstream of a polyester backing. The construction of the 5000 series allows for minimal initial resistances while still maintaining a high level of capture efficiency. The 5000 series arrestor can be used in a wide variety of applications. Best performance is when coating have a slightly tacky or wet overspray. The 5000 series is available in pad and roll form.
Paint Description: High Solids Baking Enamel (S.W. #1 Permaclad 2400, red) Paint Spray Method: Conventional Air Gun at 40 PSI Spray Feed Rate: 143 grains/min. 135 cc./min. Air Velocity: 150 FPM TEST INFORMATION
S
High Efficiency RP Arrestors”; performs best with slightly tacky or wet overspray
ESTORS
TEST SUMMARY:
Initial Pressure Drop of Clean Test Filter: 0.03 in. wg Final Pressure Drop of Loaded Test Filter: 0.13 in. wg Paint Holding Capacity of Test Filter: 1841 grams = 4.1 lb. Average Removal Efficiency of Test Filter: 99.81% TEST RESULTS OVERVIEW: The 5000 RP W-Series family of paint arrestors is designed with six layers of expanded paper creating an alternating labyrinth upstream of a polyester backing. The construction of the 5000 series allows for minimal initial resistances while still maintaining a high level of capture efficiency. PAINT ARRESTOR IDENTIFICATION Model: 5 000 Series W-Series High Efficiency RP A rrestor RP Part #: W5000 Single Layer (20”x20”) Number of pads in series: 1
CLEAN FILTER
0.5
0.4
0.3
The 5000 series arrestor can be used in a wide variety of applications. Best performance is when coating have a slightly tacky or wet overspray. The 5000 series is available in pad and roll form. TEST INFORMATION Paint Description: High Solids Baking Enamel (S.W. #1 Permaclad 2400, red)
0.2
0.1
0.0
TEST SUMMARY TEST SUMMARY: Paint Spray Method: Conventional Air Gun at 40 PSI Spray Feed Rate: 143 grains/min. 135 cc./min.
0
50 100 150 200 250 300
Air Velocity (FPM)
Air Velocity: 150 FPM TEST RESULTS
CLEAN FILTER
PRESSURE DROP
A rrestor
0.5
0.5
0.3 Initial Pressure Drop of Clean Test Filter: 0.0 3 in. wg Final Pressure Drop of Loaded Test Filter: 0.1 3 in. wg Paint Holding Capacity of Test Filter: 1841 grams = 4. 1 lb. Average Removal Efficiency of Test Filter: 9 9 . 81% 0.4
0.4
0.3
0.2
0.2
0.1
0.1
0.0
0.0
0 1000 2000 3000 4000 5000 6000
0
50 100 150 200 250 300
Air Velocity (FPM)
Wet Paint Fed (g)
Product Tested by LMS Technologies, Inc.
Copyright ©2020 RTT ES | All right reserved
PRESSURE DROP
0.5
wg
Follow us on:
2975 Discovery Blvd, Rockwall, TX 75032 | Toll-Free 888-452-6684 | eFax (972) 408-0881 | Email sales@rparrestors.com | www.rttsolutions.com
wg 1 lb.
888-452-6684
sales@rparrestors.com
rttsolutions.com
2975 Discovery Blvd, Rockwall, TX 75032
0.4
0.3
Made with FlippingBook - professional solution for displaying marketing and sales documents online