FIling Cabinets Anco delta_edge_assembly

DELTA EDGE - BACK CLADDING

Assembly Instructions

1

2

3

Rear View

Side View

Insert Shelf Clips

Top back panel installation

2nd hole from top

Drop the Shelf onto the Shelf Clips

Side Panels

1. Insert shelf clips in the mid-height of both side panels - front and back. And drop the shelf onto the clips. This is to stabilise the bay for easier assembly, this shelf can be moved to a desired position at a later stage. 2. Install the top and bottom shelves by inserting the shelf clips in the same way as in the step 1. The shelf clips are positioned at the very top and very bottom holes on the side panels.

4

5

Bottom back panel installation Rear View

3. Attach the top back panel to both side panels using the M6 nuts and bolts in the 2nd hole from top on the back panel.

top back panel

1st or 2nd hole from top (overlaping back panels)

4. Attach the bottom back panel to both side panels using the M6 nuts and bolts in the 2nd hole from the bottom on the back panel and also where the 2 panels overlap. Use the remaining nuts and bolts to secure the back panels evenly.

5. Attach the rest of the shelves at desired heights.

Wide Flat Head Screw Driver, Spanner 10mm Tools Required

bottom back panel

2nd hole from bottom

Two competent people wearing safety gloves , safety shoes and protective eyeware are recommended to undertake the assembly. Safety Precaution

scan for more info

Made with FlippingBook - Online catalogs