Document Reference: IM 101 Skip & Rollon-Rolloff (Roro) Vehicle Operations: Risk Assessment
Uneven surfaces, wet or slippery ground, obstacles in the path Infection from exposure to hazardous waste, chemicals or vermin
● Only remove contaminants if safe to do so and wear gloves provided. ● Use proper lifting techniques (bend knees, keep back straight). ● Be cautious and move slowly, especially in areas with uneven, slippery surfaces. ● Wear appropriate non-slip footwear. ● Be vigilant and aware of surroundings. ● Always use high-visibility clothing when operating out of the vehicle. ● Inspect the bin for protruding objects before moving or sheeting. ● Check the bin for damage before moving. ● Report defective bins. ● If container is blocked, seek assistance from site staff/customer before moving any items. ● Avoid direct contact with the waste. ● Clean hands before eating, drinking smoking. ● Report all safety concerns/Near Misses & Incidents/Accidents ● Secure lids & doors before moving containers – Lifting or tipping. ● Driver training (Skip, RORO) ● Carry spare door pins and sheet loads at all times. ● Ensure pins are in good condition, bent pins are not used and replaced. Do not move without secondary locking pin in place on large containers. ● Do not place hands in door opening without the door secured in the locked position or door prop.
Moving parts on the bin
Crush injuries
Lids/Doors or containers
10
Hit by lid/container during lifting/blown by wind. Hit by container door or lever (Compactors and open containers)
The Cox Group ISO9001/ISO14001/ISO45001/PAS99
Rev 1 21/08/2024
Approved: AB
7
Made with FlippingBook Digital Publishing Software