Document Reference: OP 202 Method Statement Rollon – Rolloff Vehicle Activities
7. On completion of being loaded. Cover the load with the auto sheeting system taking caution to not catch the sheet on any protruding material. Never climb on containers or loads to prevent falls from height. Use the sheeting pole to secure the bungie cable to the container.
8. Once sheeted then turn the ignition off and complete the following checks:
• The load is distributed evenly along and across the body and it is contained within the body - not protruding/resting on/over the sides, or at risk of spilling. • The rear lamps and reflective marker are clean and not damaged. • There are no stones, bricks, etc. trapped between tyres that could become a hazard to other road users or pedestrians. • The vehicle is swept completely clear of any debris. • There is no warning lights illuminated or alarms sounding.
• All equipment is stowed correctly, safely, and securely for transport. • Tyres are inflated correctly and in a legal and roadworthy condition.
Compactors
Static Compactor Containers
1. Secure the Static Compactor o Confirm the static compactor is firmly secured to the ground before beginning any movement operations. 2. Check the Hopper • Ensure the compactor hopper is empty prior to disengaging the compactor. • If not empty, request the customer to complete a compacting cycle to clear the hopper.
3. Disengage the Compactor
• Remove all locking pins or clamps securing the container to the compactor. • Ensure the clamps are fully cleared from the container before proceeding.
4. Engage the Vehicle
• Attach the vehicle to the container following the standard connection procedure.
5. Initial Lift and Movement
The Cox Group ISO9001/ISO14001/ISO45001/PAS99
Rev 1
27/08/2024
Approved: AB
4
Made with FlippingBook Digital Publishing Software