2024 Spring Catalog

NEW

Fluke FEV100 Adapter Kit for Electric Vehicle Charging Stations Test the safety and performance of type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope.

· Check that an Electric Vehicle Charging Station is Correctly Wired and that Protective Earth is Functioning Properly with the PE Pre-Test Feature ·  Perform GFCI Troubleshooting of an Electric Vehicle Charging Station and Verify it is Functioning Properly for Safety ·  Test Different Charging States of an Electric Vehicle Charging Station with the Turn of a Button. Verify the Charging Voltage Using a Digital Multimeter

·  CP State Simulation: A: ± 12V 1kHz; B: 2.74kΩ +9 V / -12V 1kHz; C: 882Ω +6 V / -12V 1kHz; D: 246Ω +3V / -12V 1kHz ·  Output Voltage: Max. 250 V / 60 Hz, CAT II 300 V ·  Compatibility with Other Test and Measurement Tools: Digital Multimeter, Oscilloscope ·  Safety Testing: Protective Grounding Test (PE), GFCI Test

ORDER #

DESCRIPTION

PRICE $1,200 $1,620

FEV100-TY1

Test Adapter EV Charging Stations with Type 1 Connection & Cable Test Adapter EV Charging with Type 1 Plug, 87V, Tl224, US

FEV100-TY1-KIT FEV-CON-TSL

Each Unit Includes: Fluke FEV100/ BASIC Test Adapter, Fluke FEV-COM/TY1 Type 1 Connector & Cable, Soft Carrying Case, User Manual, 3-Year Warranty.

$520

Tesla Type Plug For Test Adapter EV Charging, US

FEV100-TY1 with Case & Connector

Call

★ Recommended Transcat Calibration

The new EVCC300 introduces a new and convenient way of checking Electric Vehicle charge points. A simple all in one concept provides an easy to use solution to check both the safety and operation of level 1 and two phase level 2 chargers. NEW

Megger ® EVCC300 Electric Vehicle Charger Checker, Type 1 & 2 Connections

· Checks Level 1 and Level 2 Chargers · Checks Chargers with SAE J1772 Type 1 and Type 2 Connectors · Performs Four EV Charger Safety Checks · Performs Four EV Charger Operation Checks

· Checks to See if Nuisance Tripping or RCD/GFCI is Likely to Occur · Reads Control Pilot State Response from EV Charger to IEC61852-1

ORDER # EVCC300

DESCRIPTION

PRICE $1,040

Electric Vehicle Charger Checker, Type 1 & 2 Connections

Fluke Networks LinkIQ Cable and Network Tester The LinkIQ ™ Network+Cable Tester is designed to provide trusted cable testing along with network testing professionals need to do their jobs. NEW ·  Measure Network Capacity up to 10 Gig Via Frequency Based Measurements ·  Troubleshoot Active Networks by Providing

Fluke Networks DSX2-8000 CableAnalyzer™ Fluke Networks DSX2-8000 is the industry's first true Cat 8 field tester; certifies twisted pair Cat 5e, 6, 6A, 8 and Class I/II cabling with limits up to 2000 MHz.

·  Versiv Modular Design Supports Copper Certification, Fiber Optic Loss, OTDR Testing and Fiber End-Face Inspection ·  Unmatched Speed for Cat 6A, 8, Class FA, I/II and all Current Standards ·  ProjX System Manages Job Requirements and Progress from Set-Up to Systems Acceptance ·  Taptive User Interface Simplifies Set-Up, and Eliminates Errors ·  Analyze Test Results and Create Professional Test Reports Using LinkWare Management Software ·  Graphically Displays the Source of Failures Including Crosstalk, Return Loss and Shield Faults ·  Intertek Verified to TIA Level 2G the Most Stringent Accuracy Requirement ·  Built-In Alien Crosstalk Testing Capability

Connected Switch Information (Switch Name, Port Number, and VLAN info) ·  Graphical Wiremap and Length Test to Identify Common Faults that Occur with Cabling Installation ·  Install and Troubleshoot PoE Devices Via Switch Negotiation and PoE Load Test ·  Document Work Through LinkWare ™ PC Reporting ·  Support all Industrial Ethernet Protocols (EtherNet/IP, PROFINET, EtherCAT, and Others) · I ndustrial Ethernet Kit Supports Industrial Connectors (M8D, M12D, M12X)

ORDER # DESCRIPTION

PRICE $2,787 $3,347

LIQ-100 LinkIQ Cable and Network Tester LIQ-KIT LinkIQ Cable and Network Tester Kit

ORDER #

DESCRIPTION

PRICE

$15,308

DSX2-8000 2GHZ CAT 8 DSX2 Copper Cable Analyzer with Wi-Fi

Transcat.com | 800-830-0571

44

PIPETTES

Made with FlippingBook - Online Brochure Maker