Via Seating's 2022 Price Book, 1st edition

c o n t r o l me c h a n i s m s ( pa r t 2 of 2)

PART # DETAILS

CONTROL

INSTRUCTIONS

OFFERED ON SERIES

25C 26C

Genie ®, Proform® & Riva.

Basic conference control mechanism. 26C With seat slide.

1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (single position)- Use the same paddle you used for the seat height adjustment. To lock the chair in an upright position, shift your weight forward until the chair is in an upright position, then push lever in. To rock (free float) shift your weight forward and pull the lever out. 3 Back/recline tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension 4 Optional seat slider (use control -26C )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back.

4

1

3

2

Note: Seat and back tilt as a unit.

45C

1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (single position)- Use the same paddle you use for the seat height adjustment. To lock the chair in an upright position, shift your weight forward until the chair is in an upright position, then push lever in. To rock (free float) shift your weight forward and pull the lever out. 3 Back/recline tension adjustment- Rotate knob clockwise (right) to increase tilt tension. Rotate knob counter-clockwise (left) to decrease tilt tension. Rise. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back tilt lock adjustment (4 position)- Rotate lever upward to unlock back tilt, lean back or forward to your desired position, rotate lever down to lock. 3 Seat depth adjustment- Pull up on paddle while shifting your weight forward to move your seat forward. Shift backward to move your seat back. Rise.

Single position back lock conference control.

1

3

2

55C

Body balance synchro with seat depth adjustment.

3

1

2

64C 65C

Run II.

Synchro control mechanism with a side tension adjustment. 65C With seat slide. Note: Seat and back move in a 2:1 ratio. Quick adjust advanced synchro control mechanism. 67C-SS With seat slide. 67C-SS-FT With ergonomic

1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension. 3 Back tilt lock adjustment (3 position)- Rotate knob right to lock in position. Rotate knob left to unlock and free float. Use own back tension to push against back of chair and release back from chair to find desired position. 4 Optional seat slider (use control -65C )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back tension adjustment- Rotate knob right to increase tilt tension. Rotate knob left to decrease tilt tension. 3 Single rotation back tilt lock adjustment (5 position)- Tilt the seat back to desired angle and twist slightly. To unlock, twist the other way, leaning back to unlock. The turn is smooth. All tilt lock angles can be reached within a single turn of the handle. 4 Optional seat slider (add SS )- Push down on the paddle while shifting your weight forward to move your seat forward. Shift backward to move your seat back. 5 Optional forward tilt adjustment (add -FT )- Push the paddle in the down position and lean back in the chair. You will hear a click when the forward tilt mechanism has turned on. Sit in your normal position to use the forward tilt feature. To turn off the forward tilt feature, push the paddle in the up position and lean back in the chair. You will hear a click when the forward tilt mechanism has turned off. Note: When the chair is in the 2 most forward positions of the back tilt lock, the forward tilt adjustment cannot be engaged. To engage/turn on the forward tilt adjustment and switch the back tilt lock adjustment to the neutral position. 1 Seat height adjustment- Adjust the seat height by lifting your weight out of the chair and pulling up on the paddle. Proper seat height is realized when the top of your legs are somewhat parallel to the floor. 2 Back lock adjustment (3 position)- Use the same paddle as you use for the seat height adjustment. To lock the chair in an upright position, shift your weight forward until the chair is in an upright position, then push the button in. To rock (free float) shift your weight forward and push the button again. 3 Optional seat slider (add -12SS )- Pull up on paddle while shifting your weight forward to move your seat forward or backward to move your seat back.

2

4 3

1

67C

4u, Brisbane HD, Carmel, Genie ®,

3

2

Genie Flex ®, Linate, Onda,

5

4

1

Proform®, Riva, Oslo mid back & Vero. Note: On Onda, only 67C-SS & 67C-SS-FT options available.

forward tilt adjustment.

2

3

1

74C

4u, Genie®, Genie Flex ® , Onda, Proform® & Vero. Note: On Onda, no -12SS option available.

Auto-adjust body balance control mechanism. -12SS With seat slider.

2

3

1

VIA SEATING LIST PRICING 2022 | TABLE OF CONTENTS | VISIT WWW.VIASEATING.COM/SPEC-IT FOR THE LATEST OPTIONS | 1-800-433-6614 27

Made with FlippingBook - professional solution for displaying marketing and sales documents online