Nov/Dec 2026 Column Boat Winter Layup Tips By Capt. John N.Raguso
In prior year’s end-of-season articles, we’ve talked about winterizing your engines, fuel system, water system, marine electronics and more. For this year’s take, we’re going to cover some more generic boat winter layup tips that should keep your ride safe and dry for the winter, making a spring commissioning come next April a lot less painful . Got You Covered
The mission of a boat cover is to protect against rain, leaves, harmful UV light, snow and sleet, airborne dirt, in addition to any winged or climbing nesting creatures like birds, squirrels, raccoons, etc. that want to make your boat their winter retreat. The difference between one that works and one that fails comes down to three things: the material matches the exposure, the fit is properly sized and supported and the cover is held down by lines running over the top of the boat rather than by the edge grom- mets alone. Most covers that blow off, tear or puddle water and ice in the wrong places were incorrectly sized and/or secured.
According to the folks from tytarp.com, manufacturers of polyethylene (PE), PVC and cotton duck tarpaulin products, a boat cover has four jobs, specifically: •Shed water. Rain and melting snow must run off, not pool. Pooling is what destroys covers, because the weight stretches the fabric until it sags, then tears at the lowest point. •Block UV Rays. Ultraviolet light degrades both the cover and the boat beneath it. Gelcoat, vinyl upholstery and plastic fittings all fade and get brittle over time with extended exposure levels.
•Breathe. A cover that traps moisture causes more damage than no cover at all in a humid climate. Condensation forms underneath and mildew follows. Efficient boat covers should have a number of strategically-placed vents to minimize the buildup of internal moisture inside.
•Stay put. A cover that lifts and moves radically in the wind abrades the hull as it constantly jiggles back and forth and eventually tears out at the fastening points with enough pressure and stress. The options that boat owner’s face regarding winter cover types can be summarized down to two concepts…effectiveness and cost. I have tried each one of these solutions and can tell you from firsthand experience the plusses and minuses of each. HDPE (high density polyethylene) Covers You can purchase these ubiquitous blue or silver tarps from a variety of big box (Home Depot, Lowes, Harbor Freight), online and local marine stores. The primary reason these are frequently the choice of frugal DIY boaters is the affordability factor. Depending on the length and beam of your ride, prices can range from $35-to-$95 and most come equipped with brass tie-down grommets. The problem with the majority of these covers is that they will rip and tear easily if not supported properly and the thin PE material typically lasts a season or two, so they are almost“disposable”. When they cease being functional boat covers, they fold up e asily, take up a minimal amount of space and you can still use them as drop cloths when painting your house or apartment, or as a weather resistant cover for your woodpile.
Made with FlippingBook - PDF hosting