6.2.7 SMOKE DETECTION – Smoke detectors are available in a variety of models. Smoke detectors should be installed by qualified individuals and in accordance with any local, state, or national codes/regulations/laws (if any). 6.2.8 SPRINKLERS - Unless otherwise requested, the sprinklers discharge at 165 o F. Sprinklers must be connected to the plant’s main sprinkler system and in accordance with any local, state, or national codes/regulations/laws (if any). 6.2.9 OPTIONAL FILTERS Standard: -Fire Retardant 80/20 Cellulose/Polyester Blend Optional: -Fire Retardant Nanofiber -Spunbond (Washable) -Other configurations are available upon request
6.2.10 CUSTOM POWDER COATING – We can powder coat your dust collection system to match any RAL color code.
7. INSTALLATION
7.1 Initial Considerations
7.1.1 The location of the unit(s) must be planned to maximize effective operation and simultaneously afford access for service/maintenance, while keeping safety considerations at the forefront. Explosions and fires in collection systems are not uncommon; therefore, systems should be designed and placed with those two aspects in mind and in accordance with any local, state, or national fire/safety codes/regulations. Thought should also be given to electrical and compressed air sources, keeping in mind that the collector will need to be connected with electricity, compressed air, and fire detection/suppression systems, if equipped. Should additional questions arise, or assistance is needed, consult your Clean Air Industries distributor. 7.1.2 After installation, access/clearance must be available to service the following components:
1. Filters 2. Blower Assembly 3. Compressed Air Valves 4. Controls 5. Dust Trays or Drums
Page 8
sales@clean-air.com
1-866-665-1829
www.clean-air.com
Made with FlippingBook Digital Proposal Creator