ACHM SERIES DIMENSIONS
OUTLET PORT
INLET PORT
2
10.50
2.31
hydraulic motor schematic
L
9.88
5.25
6.31
0.62
K
0.75
J
Approximate E
A
10.36
1.62
1.75
G
Air Flow
H
B
C
F
3
1.25
D
M *
1
0.56"Dia. Mounting Hole (6x)
H G DIMENSIONS (inches) F E
M SAE
M NPT
C D
Model
A
B
J
K
L
1.00 1.00 1.00 1.25 1.25 1.25 1.25 1.25
16 SAE 1 5/16 - 12UN-2B Thread 20 SAE 1 5/8 - 12UN-2B Thread
12.94 17.13 18.50 21.81 24.81 29.75 31.94 39.75
16.81 21.00 22.38 25.81 28.68 33.63 35.81 43.63
5.90 6.56 7.88 9.19
15.21 15.21 15.21 15.21 15.21 15.21 15.21 15.21
11.69 15.88 17.25 20.56 23.56 28.50 30.69 38.50
9.19 10.50 13.12 15.75 21.00 24.94 27.56 34.12
11.81 13.13 15.75 18.38 23.63 27.56 30.19 36.75
8.31 12.50 13.88 17.19 20.19 25.13 27.31 35.13
7.69 8.88
14.81 19.00 20.38 23.81 26.68 31.63 33.81 41.63
ACHM - 5 - ACHM - 10 - ACHM - 15 - ACHM - 20 - ACHM - 25 - ACHM - 30 - ACHM - 35 - ACHM - 40 -
____
____
11.50 14.00 19.25 23.19 25.81 32.38
____
____
11.81 13.78 15.09 18.38
____
11.00 11.00 13.25
Represents options.
Notes: 1) Removable base mounting brackets are supplied with unit at no additional charge. 2) 1/2-12 UNC-2B Tabs, 4 points, 8 points on models ACHM - 30,35 & 40 (top & bottom) for optional mounting purposes. 3) Motor mounting bracket is rotated 90 degrees on ACHM - 5 & 10 units.
4) Louvers are manually adjustable. However, all units are available with a screen front as an option (specify when ordering). 5) All units are available with a preset 30 or 65-psi pressure bypass valve. (see note "i" in maintenance page 143) 6) All units can be connected in one or Two Pass configuration. Re - fer to piping instructions for detailed operating and maintenance information.
Example of a model:
ACHM - 35 - 9 - S - R65 - 2P -____ - ____
Model
Coating Blank = Enamel (standard) G = Galvanize (cabinet) T = Heresite (core) X = Epoxy (cabinet) STS = Stainless Steel (cabinet)
ACHM = std. unit with hydraulic motor
Size
Number of Passes Tubing Blank = Copper C = Carbon Steel U = 90/10 CN SS = Stainless Steel 1P = 1 pass 2P = 2 pass
Drive Type
Connections
N = no motor 9 = hydraulic motor
Blank = NPT S = SAE O-Ring F = 4 Bolt Flange A = ANSI 150#RF Flange
Bypass R30 = 30psi R65 = 65psi
note: AIHTI reserves the right to make reasonable design changes without notice.
164
Copyright © 2019 - 2020 American Industrial Heat Transfer, Inc.
355 American Industrial Drive LaCrosse, VA 23950
tel: 434-757-1800
fax: 434-757-1810
email: sales@aihti.com
Made with FlippingBook - professional solution for displaying marketing and sales documents online