PUR® Surgical Protocol
PUR®
STANDARD PLACEMENT
PUR® DRILL SEQUENCE
Implant Diameter
3.2mm body diameter
3.5mm body diameter
4.3mm body diameter
5.0mm body diameter
6.0mm body diameter
PUR ® Drill Sequence PUR ® Drill Sequence Recommended Speed 1,000-1,500 RPM (Paralleling Pin is for guide only )
Bone Taps (3.2, 3.5, 4.3, 5.0, 6.0mm)
Implant Driver Hex Drivers
Recommended Speed 15-30 RPM
Recommended torque not to exceed 55Ncm
PUR® DRILL DEPTH
FINAL DRILLING STEPS
Final Drilling step when placing the 3.2mm PUR® Implant When placing the 3.2mm PUR® Implant, enlarge the osteotomy using the 2.7mm Drill. If the bone is very dense, create internal threads in the osteotomy using the unique PUR® 3.2mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 3.5mm PUR® Implant Enlarge the osteotomy using the 3.0mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique PUR® 3.5mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 4.3mm PUR® Implant Enlarge the osteotomy using the 3.8mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique PUR® 4.3mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 5.0mm PUR® Implant Enlarge the osteotomy using the 4.5mm drill. If the bone is very dense, create internal threads in the osteotomy. Use the unique PUR® 5.0mm Titanium Bone Tap at 15-30 RPM. Final Drilling step when placing the 6.0mm PUR® Implant Enlarge the osteotomy using the 5.5mm drill. If the bone is very dense, create internal threads in the osteotomy using the unique PUR® 6.0mm Titanium Bone Tap at 15-30 RPM.
Note: The TRU® and PUR® drills are not true-to -depth, the drill tip should not be included in determining the final depth of the osteotomy in coordination with indicator lines on each drill.
16
DENTAL IMPLANTS
WWW.STERNGOLD.COM
Made with FlippingBook - professional solution for displaying marketing and sales documents online