TRU®
TRU® Optional Instrumentation for Case Specific Indication
If implant placement was attempted and only one-half or two-thirds of the implant seated within the osteotomy, use these optional Crestal or Dense Bone drills: DENSER BONE DRILLING – OPTIONAL PROTOCOL
Implant Diameter
3.2mm body diameter
3.5mm body diameter
4.3mm body diameter
5.0mm body diameter
6.0mm body diameter
Optional TRU ® Drill Sequence (Dense Bone) Recommended Speed 1,000-1,500 RPM (Paralleling Pin is for guide only )
Lindemann Drill (For angle correction following 2mm pilot if needed)
Bone Taps (3.2, 3.5, 4.3, 5.0, 6.0mm)
(Denser bone drilling options) Crestal Drills
Recommended Speed 15-30 RPM
Denser Bone Drilling Optional Recommendations
DENSE BONE DRILLS FOR UNIFORMLY DENSE BONE
BONE TAP FOR BONE THREADING IN DENSE BONE
16mm 14mm 12mm 10mm 8mm 6mm
CRESTAL BONE DRILLS FOR DENSE OR SUPERIOR CORTICAL BONE
LINDEMANN DRILL FOR WIDENING OR PATH INSERTION CORRECTION
35
DENTAL IMPLANTS
WWW.STERNGOLD.COM
Made with FlippingBook - professional solution for displaying marketing and sales documents online