4. Installation 4.1 General
This manual is a guide for installing a variety of spray booths. The assembly drawings enclosed are specific for the booth you have purchased. This drawing is an exploded isometric drawing showing the relationship of each panel or part to the next one. A packing list of all components is provided and must be used in addition to the drawing to identify all components. All DAMAGES MUST be reported within 24 hours of receipt and a freight claim filed with the carrier. 4.2 Preliminary RTT booths are manufactured in accordance with NFPA 33 standard for spray application using flammable or combustable materials. However, local codes and regulations may apply to the installation and use of this product. All permits and approvals should be obtained prior to installation and use of the spray booth. 1. Uncrate and inventory all spray booth components to ensure all of the parts are accounted for. Each component is numbered on the exploded view. 2. The floor surface of the booth must be non-combustible material of such character as to facilitate the safe cleaning and removal of residues. The floor surface must be flat and level.
3. Mark the dimensional outline of booth on floor. 4. Follow the step-by-step instructions provided. 4.2.1 Recommended Booth Layout Tools >> Chalk line or self-leveling 5-way laser >> Tape measure >> Marker >> Framing square
Use the 3-4-5 method (Pythagorean Theorem) A² + B² = C² for a right triangle to layout and square the booth. C is the longest side (hypotenuse) and A and B are the two shorter legs. If a triangle has sides measuring 3, 4 and 5 feet (or any other unit), it must be a right triangle with a 90° angle between the short sides. You can multiply each number by the same amount and still use this method. For example let’s say that the booth width being installed is 9' I.D., use a multiplier of 3 to achieve the 9' I.D. working width of the booth for your first line (A²) and the right triangle will consist of the following dimensions: >> 3 x 3 = 9 (first line A²) >> 4 x 3 = 12 (second line B²) >> 5 x 3 = 15 (third line C²) Step one: Locate a building drawing showing the booth in the building. a b c a 2 +b 2 =c 2
14
Made with FlippingBook - professional solution for displaying marketing and sales documents online