for electrical installation and requirements. Field installed panels and electrical wiring must be installed by a licensed electrician. The cabinet that will house the controls is NEMA 12 rated. It is not suitable for installation in a Class 1, Division II or higher area. Refer to the NFPA 70 for electrical zoning requirements.
4. In st allation Onsite 4.1 General
This manual is a guide for installing a variety of ovens. The assembly drawings enclosed are specific for the oven you have purchased. This drawing is an exploded isometric drawing showing the relationship of each panel or part to the next one. A packing list of all components is provided and must be used in addition to the drawing to identify all components. All DAMAGES MUST be reported within 24 hours of receipt and a freight claim filed with the carrier. 4.2. Preliminary RTT ovens are manufactured in accordance with the NFPA 86 standard for Ovens and Furnaces; however, local codes and regulations may apply to the installation and use of this product. All permits and approvals should be obtained prior to the installation and use of the oven. > Uncrate and inventory all oven components to ensure all of the parts are accounted for. Each component is numbered on the exploded view. > The floor surface of the oven must be non-combustible material of such character as to facilitate the safe cleaning and removal of residues. > The floor surface must be flat and level.
> Mark the dimensional outline of oven on floor. > Follow the step-by-step instructions provided. 4.2.1. Recommended Oven Layout Tools > Chalk line or self-leveling 5-way laser > Tape measure > Marker > Framing square
Use the 3-4-5 method (Pythagorean Theorem) A² + B² = C² for a right triangle to layout and square the booth. C is the longest side (hypotenuse) and A and B are the two shorter legs. If a triangle has sides measuring 3, 4 and 5 feet (or any other unit), it must be a right triangle with a 90° angle between the short sides. You can multiply each number by the same amount and still use this method.
11
Made with FlippingBook - professional solution for displaying marketing and sales documents online