Process 12 – Door Latch and Handle Installation
Step 1 - Installing the Door Latches a) The Product Door has a bolt plate that is used to hold the latch . > The latch will extend past the doors edge . b) The keeper should have a spacer attached to the back with bolts . c) The spacer must be field welded into position once the keeper and latch have been aligned – Reference Figure 25 . d) The latch and the keeper should be in contact with each other with the cam latch in contact with the roller on the keeper . Step 2 - Installing the Door Handles a) The door handles are attached to the doors by using the provided large ½” Tek screws . b) Locate the mounting position of the handles by following Figure 26 . c) Handles should always be mounted to the cap channel structure that encapsulates the insulated panels, never the insulated panels themselves .
55
Made with FlippingBook - professional solution for displaying marketing and sales documents online