Tiny Tools
Standard Tiny Tools holders to clamp the MSD drills
SIM 22S...
CIM...
SIM...
SEMK...
SEM R...
Technical Section General instructions for use Using the SIM holders Insert the MSD supercut drill into any of the Tiny Tools holders and tighten the two clamping screws on the tool at (in case of CIM use the internal tool indexing). Use the smallest possible tool overhang for maximum tool stability. Adjust the rear stopper till the front of the screw touches the tool shank.
Non-rotating drill aligning Drilling operation on lathe is called non-rotating drilling, when the workpiece rotates instead of the drill. It is extremely important to ensure the smallest axis misalignment h , as possible, between a tool and lathe spindle prior machining. Large misalignment could cause poor quality of holes or even drill breakage, the solid carbide drills are very sensitive to bending. To achieve high quality holes and avoid hole shape deviation, a drill axis must be parallel with the spindle axis.
39
Made with FlippingBook - Online Brochure Maker