REPLACEMENT PARTS
Pearl offers a tremendous number of parts for our drums and hardware. The parts represented on these pages are some of the most commonly requested items.
OPTI-LOC
R2 AIR & OPTIMOUNT
STRAINERS
To attain tonally true sound, every drum would have to be mounted in a floating point at the center of its shell. R2 Air equally balances mounting pressure across two floating points at the top and bottom of each tom. This gives true tonal separation from mounting hardware and enhances sonic output. U.S. Patent #11640814
SR017
OPL1016/C
ON
OFF
Opti-Loc suspension tom holders provide exceptional stability while greatly improving resonance and sustain. (For EXX / EXL Export / DMP)
Standard Snare Strainer Snare Strainer Complete Snare Strainer Complete
SR014N SR017 SR018
THE SR017 STRAINER Simple and effective, the SR017 is a Pearl standard for effortless snare switching and sensitivity control. Its smooth lever action and fine-tuning knob let you dial in the right amount of snare wire saturation to suit your personal sound.
OPL0608/C OPL1016/C
Opti-Loc for EXX and DMP 6˝-8˝ Diameter Opti-Loc for EXX and DMP 10˝-16˝ Diameter
R2AS100708C
ULTRA-SOUND SNARES
REPLACEMENT SNARES
STAINLESS STEEL TENSION RODS
JUNGLE GIG
Pearl’s Ultra-Sound snares feature patented Graduated Tension wires for extended dynamic range from ultra soft to ultra loud. Ultra-thin, low mass end plates assure ultra quick response. The end plates feature three mounting options: tunnels or holes for cord mounting and slots for straps. U.S. Patent #7202405
Pearl’s Stainless Steel Tension Rods are machined, not forged, from a single piece of stainless steel to the most exacting tolerances in the industry. They feature super-smooth, precise tensioning, with absolutely no play. Each non-plated stainless steel tension rod is matched with a precision-machined brass swivel nut for ultra-precise performance.
SPS18/6 SNC50OR/4
Our OptiMount Suspension System attaches to the tom’s tension rods and floats on rubber cushions, providing the ultimate in stability while allowing the drum to resonate fully without restriction.
OPT0708
OPT0910 OPT1112
OPT1314 OPT1516
20 / I
20 / D 20 / C
OPT0708 / for drums 7˝~8˝ deep, 8˝~16˝ diameter OPT0910 / for drums 9˝~10˝ deep, 8˝~16˝ diameter OPT1112 / for drums 11˝~12˝ deep, 8˝~16˝ diameter OPT1314 / for drums 13˝~14˝ deep, 8˝~16˝ diameter OPT1516 / for drums 15˝~16˝ deep, 8˝~16˝ diameter
S040
JG16
JG16 • Pearl’s Jungle Gig allows the conversion of a 16˝ Floor Tom to a Bass drum.
SN1320C SN1320D SN1320I SN1420C SN1420D SN1420I
20 strands for 13˝, C-type, w/ straps & cords 20 strands for 13˝, D-type, w/ straps & cords 20 strands for 13˝, I-type, w/ straps & cords 20 strands for 14˝, C-type, w/ straps & cords 20 strands for 14˝, D-type, w/ straps & cords 20 strands for 14˝, I-type, w/ straps & cords
MUFFLERS
MUFFLE HEADS
BASS DRUM MUFFLER
S041
External clamp-on muffler for snare drums and toms. By adjusting the pressure and position of the felt pad, excessive overtones can be precisely controlled or eliminated.
Model # MFH08 MFH10 MFH12 MFH13
Size
Model # MFH14 MFH16
Size
S022N S022NU
20 Strand for 14˝ w/ Cords 20 Strand for 14˝ w/ Cords, Uncoated 20 Strand for 14˝ w/ Straps 20 Strand for 14˝ long, w/ Straps
W7/32 x 28mm (6) W7/32 x 35mm (6) W7/32 x 38mm (6) W7/32 x 42mm (6) W7/32 x 47mm (6) W7/32 x 52mm (6) M6 x 115mm
SST5028/6 SST5035/6 SST5038/6 SST5042/6 SST5047/6 SST5052/6 SST6115
8˝ 10˝ 12˝ 13˝
14˝ 16˝ 20˝ 22˝
S022 S025
MFH20B MFH22B
42 / I
42 / D
42 / C
S029N S030N S031N S032N S033N
20 Strand for 13˝ w/ Cords 24 Strand for 14˝ w/ Cords 20 Strand for 12˝ w/ Cords 16 Strand for 10˝ w/ Cords 16 Strand for 12˝ w/ Cords
BDMF
OM1
S040 S041 SPS18/6 SNC50OR/4
42 strands for 14˝, C-type, w/ straps & cords 42 strands for 14˝, D-type, w/ straps & cords 42 strands for 14˝, I-type, w/ straps & cords
15 Strand for 14˝ w/ Cords, Steel Cable, Thinner Gauge 15 Strand for 14˝ w/ Cords, Bronze Cable, Thicker Gauge
SN1442C SN1442D SN1442I
Plastic Strap (6/pkg) Snare Cord (4/pkg)
BDMM
Clamp-on Muffler, Snare Drum & Toms
OM1
Bass Drum Muffler (Full Size) Bass Drum Muffler (Mini Size)
BDMF BDMM
TENSION RODS
TENSION ROD LOCKNUTS
TENSION ROD WASHERS
NLW12B/12
MTW12/12
TNK10N/10
TL20/10
W7/32 x 28mm (6) for 3” Deep Snare W7/32 x 35mm (6) for Free Floaters before 2002 W7/32 x 42mm (6)
T055/6 T060/6 T061/6 T061L/6 T062/6
W7/32 x 47mm (6) for 6.5” Deep Snare W7/32 x 52mm (6) for 5.5” Deep Snare
M6 x 90mm (Bass Drum) M6 x 115mm (Bass Drum)
T065 T066
T055/6
T060/6
T061/6
T061L/6
W7/32 x 52mm (DMP, EXL, EXX, MDT Snare) W7/32 x 47mm (DMP, EXL, EXX, MDT Toms) W7/32 x 100mm (Bass Drum)
TR5052 TR5047 TR5100
Nylon Washers (12) Black Metal Washers (12)
NLW12B/12 MTW12/12
TNK10N/10 TL20/10
Tension Keeper (10/pkg) Tension Rod Lock Nuts (10/pkg)
T062/6
T065
T066
97 PEARL 2024 PRODUCT CATALOG • PARTS
WWW.PEARLDRUM.COM 98
Made with FlippingBook. PDF to flipbook with ease