Powering the shift to electric mines
With operations taking place hundreds, or even thousands, of metres below the ground, underground mining vehicles need to consistently perform well. Equipment failure in underground mines can not only re- sult in huge repair costs and significantly impact production, but it can also risk health and safety, so it is critical that electric mining vehicles can meet the demands of this application. The regeneration generation Underground mining equipment encounters some of the harshest con - ditions out there — unseen holes, tight tunnels, and uneven terrain can all place stress on automated equipment. Therefore, vehicles must be designed with these conditions in mind. An essential component of any EV is its dynamic braking resistor (DBR). Heavy duty applications like mining require heavy duty com- ponents to withstand the tough operating conditions they face. When a mining vehicle brakes, using the principles of regenerative braking, the first option is to store the excess energy produced in the vehicle’s battery for reuse, improving the energy efficiency of the ve - hicle and keeping the system operational for improved safety. However, when the battery is close to its full charge, this is not pos- sible. A dynamic braking resistor is the simplest, most reliable and cost-effective solution to this problem as it dissipates the excess energy as heat, allowing the EV to stop when required. This is particularly use - ful in mining applications, where operational efficiency and reliability are crucial. Cressall’s EV2 water-cooled DBR has a unique design, meaning it takes up just ten per cent of the volume and 15 percent of the weight of a conventional air-cooled DBR. Units can be combined in up to five-module assemblies to meet high-power requirements. Mining techniques have evolved many times throughout its rich his - tory. With increased pressure to decarbonise, mining EVs will play an essential role in bringing the industry into the 21st century, making operations efficient, reliable, and safe. About Cressall Resistors The world's foremost power resistor manufacturer, Cressall Resistors, offers an unrivalled combination of experience and expertise as well as the UK’s widest range of resistor technologies. Cressall’s customers in - clude ABB, Siemens, Areva and Alstom, as well as major utilities such as Northern Powergrid and Western Power Distribution (WPD), EDF and Scottish Power. The company also works with countless smaller specialists such as CP Automation, HMK Automation, and Drives and ACE Winches. Indeed, because of the fundamental nature of Cressall’s product almost everyone in the electrical industry will have cause to contact the company at some point; making the Leicester based busi - ness a bellwether for the health of the sector itself.
How can resistors facilitate safe, efficient underground mining?
The development of mining vehicles has taken many twists and turns throughout its 500-year history — from wooden carts to diesel-fuelled trucks and most recently, electric vehicles (EVs). Increasing environ - mental, financial, and governmental pressures are driving the mining industry towards electrification. Here, Simone Bruckner, managing director of dynamic braking resistor manufacturer Cressall Resistors investigates the benefits of electrified underground mining and the role resistors play. According to a 2020 McKinsey report , the global mining industry is responsible for between four and seven percent of total greenhouse gas emissions, so any technology that contributes to the sector’s de- carbonisation is valuable. For decades, diesel-powered machinery and vehicles have dominated mining. Its long success is down to the fact diesel engines can handle the extremely harsh conditions of under- ground mines, enabling access to once unreachable depths. The problem with diesel Diesel’s power doesn’t come without problems. From an environ - mental perspective, the use of diesel engines doesn’t support mining’s decarbonisation agenda. However, there is another reason why moving away from diesel is a good idea — its negative impact on worker safety. According to the International Labour Organisation, despite only employing one percent of the global labour force, mining is accountable for eight percent of fatal workplace accidents. Two major sources of hazard in underground mining are ventilation and noise, which are both worsened by the use of diesel-powered ma- chinery. The emissions from diesel mining equipment are a large con- tributor to the toxic gases found in underground mines, which require vast, comprehensive ventilation systems to clear the air for workers to breathe. In addition, the noise produced by large diesel engines adds to the noise pollution, which is already significant, and can lead to noise-induced hearing loss. The move to electric EVs eliminate the noise and emission problems associated with diesel power systems. However, currently only 0.5 percent of mining vehicles are fully electric, and many mines are reluctant to make a complete shift due to performance concerns. The same worries holding automotive consumers back from changing to an electric car hold true for mine operators, who are reluctant to move away from diesel’s reliability due to concerns around battery capacities.
23
july 2021
csengineermag.com
Made with FlippingBook Annual report