Amphenol SOCAPEX │ MIL-DTL-38999 SERIES │ Series I LJT
MIL-DTL-SERIES I, LJT EXTENDED RANGE - RNJ - RACK & PANEL
Rack and Panel connector for blind mate connections.
Read our RNJ catalog for find all our technical characteritics The connectors are built to allow for design tolerances (up to the limits shown below) during the mating of the connectors and the final locking of the moving and fixed units. These connectors are derived from the LJT series and meet or exceed the MIL-DTL-38999 Series I requirements. Main features The RNJ series rack and panel connectors are qualified for the requirements of the standard DAT C 5935 x 0005 HE308 21, 25, 26 & 27T models. They are used to connect electrical and optical devices (see RNJ OP catalog) between a moving unit (rack) and a fixed unit (panel) without any coupling / uncoupling device. This function is ensured by a system of moving and the fixed units.
AXIAL, ANGULAR AND LONGITUDINAL FLOATABILITY
SEALING - IPX7 when mated and fully cabled
HE308 QUALIFIED - MIL-DTL-38999 COMPONENTS - Delivered with MIL-DTL-38999 series I and III inserts - AS39029 contacts and tooling - RNJ27 and RNJ67 receptacles compatible with LJT06, HE308-06 and MS27467 plugs - Compatible with many M85049 backshells for 38999 series I connectors
- In addition to interfacial seal, main joint souffler and rear gasket on the plug are set up for moisture sealing between connector halves.
MATERIALS AND PLATINGS - Aluminium with Olive drab cadmium / Black zinc nickel / Nickel / Tin Zinc plating - Passivated Stainless steel OPTIONS - Crimp or PC tail contact terminations - Power versions from 60 to 500A (23-P1 and 25-P1) - Jam nut or Square flange plugs & receptacles - Stand-off option on receptacles RNJ27***F459 & RNJ67***F459.
RUGGED DESIGN - 8 shell sizes from 11 to 25 - Lightweight space saving design - Contacts protection: 100% scoop-proof design EMI/EMP SHIELDING - Shells are grounded before contact mating
Realignment axis
Distance between panels
Square Flange
Axial
Angular
Longitudinal
Jam nut
0,5 mm
0,5 mm
1 mm
0,5 mm
32 mm
+- 6°
36 mm
Angular Angular
Axial
Longitudinal
Angular
Axial
Longitudinal
Axial
Longitudinal
Options
JAM NUT
SQUARE FLANGE
RNJ26** HE308 26** with rear accessory option
RNJ46** without rear accessory option
RNJ66** with rear accessory option
RNJ86** without rear accessory option
Plug RNJ*6**
RNJ27** HE308 27**
RNJ27***F459 Stand-off
RNJ67**
RNJ67***F459 Stand-off
Receptacle RNJ*7**
All dimensions are given for information only and are in mm, except as otherwise specified │ *in mm: 1mm=0.03937 inch
Amphenol SOCAPEX
Due to technical modifications, all information provided is subject to change without prior notice Designed by Amphenol Socapex
187
Made with FlippingBook - Online catalogs