Amphenol SOCAPEX │ MIL-DTL-38999 SERIES │ Series III TV-CTV
MIL-DTL-38999 SERIES III EXTENDED RANGE - REDUCED FLANGE RECEPTACLE
When small dimensions & lower weight are requiered
Description Reduced flange receptacle derived from 38999 series III are dedicated to applications where size and weight are critical, offering a smaller footprint and higher contact density. 12 A
11
Main features
B
Standard castle nut
Safety castle nut
Safety castle nut (stainless steel only)
- Derived from MIL-DTL-38999 Series III connectors. - For Jam nut receptacle (TV*07).
- Higher density on panel: 41% average footprint surface reduction. - Lighter: 20% average lighter than standard 38999 stand off receptacle. - Mates with standard MIL-DTL-38999 Series III plugs. - Matches MIL-DTL-38999 Series III performances. - Improved design of the o’ring groove allowing the o’ring to stay in place. D C
OPTIONS - Crimp or PC tail contacts (standard or tinned) - Stand-off (double flange) version for PC tail contacts - Safety Castle nut versions for wire locking E
F
Footprint savings Average 41% footprint reduction:
G
38999 Reduced flange (F312 & F059) ØB MAX
% Ø reduction Standard vs Reduced Flange
Reduced flange F312/F059
38999 standard ØA MAX
Size
9
30.5 35.2 38.4 41.6 44.8 49.5 52.7 55.9
22.1 25.1 28.1 32.1 36.1 38.1 41.1 44.1 48.1
47% 49% 46% 40% 35% 41% 39% 38% 34%
H
ED BY: S Bhanuse
LAST APPROVED BY: K Collet
11 13 15 17 19 21 23 25
ORIGINAL DRAWING DATE : 21/01/98
CONFIGURATION DATA ARE AVAILABLE IN PDM
L SOCAPEX THYEZ CEDEX
REV :
T PAGE :
1/2
173-PLC-059-00
11
12
Standard Jam nut Receptacle
59
Panel hole dimensions
+ 0.1 0
+ 0.1 0
E recommended
Size
H
ØG
9
23.8 27.0 31.4 34.5 37.7 40.5 43.7 46.9 51.0
17 20 23 27 31 33 36 39 43
16
11 13 15 17 19 21 23 25
19.1 22.3 25.5 30.3 31.9 35.1 38.3 41.5
Tooling Specific tool for castle nut tightening
Size
Amphenol
809681 809682 809683 809684 809685 809686 809687 809688 809689
9
11 13 15 17 19 21 23 25
Apply same tightening torque and procedure as for standard jam nut receptacles.
All dimensions are given for information only and are in mm, except as otherwise specified │ *in mm: 1mm=0.03937 inch
Amphenol SOCAPEX
Due to technical modifications, all information provided is subject to change without prior notice Designed by Amphenol Socapex
87
Made with FlippingBook - Online catalogs