Amphenol SOCAPEX │ MIL-DTL-38999 SERIES │ Series III TV-CTV
MIL-DTL-38999 SERIES III EXTENDED RANGE - ENHANCED SEALING
Helium leakage limited to 1.10 -6 cm 3 per second
Description
Receptacles with enhanced sealing are derived from the standard MIL-DTL-38999 Series III receptacles. These receptacles helps avoiding leakage and offer a protection against external contamination.
Main features
- Receptacles with enhanced sealing – intermeatable with MIL-DTL-38999 Series III plugs - Available on standard signals arrangements with Solder Cup or PC-Tails pin contacts - High Speed contacts available - Operating Temperature range: -55 / +125°C. - Initial sealing performance: Helium leakage < 1.10 -6 cm 3 /s under 1 bar of differential pressure. - Designed for unpressurized area. - Avoid any stress on contacts before, during and after wave or iron soldering process. - With Stand-off shells, shells must be threaded onto the PC Board before any soldering. - We advise to use HFE cleaning product and strongly not recommend any Vigon based one. - EH versions have been specifically designed to remain highly performant during termal chocks
CONTACTS TERMINATIONS
How to order ETC / EHC ETCI / EHCI ETLI / EHLI
Solder Cup contacts
PC Tail - Standard Length PC Tail - Long Length
Amphenol Designations - TV Enhanced Sealing Receptacles
1.
2.
3.
4.
5.
6.
7.
8.
Material and platings
Contact arrangement
Series
Shell type
Enhanced sealing Contact type
Contact gender
Keying
Deviation
TV
07
W
ET
C
15-35
P
A
F312
6. Contact gender P
1. Shell type (receptacles only) Shell type
Pin contacts (500 cycles)
Associated materials and platings
Temperature max
S Socket contacts (500 cycles) Enhanced sealing receptacles are always delivered with contacts
07
W, ZN, ZR, TZ
Jam nut receptacle
S07 P00
F, K, S, B
+125°C
W, ZN, ZR, TZ
7. Keying Blank (for normal)
Square flange receptacle
PS00 F, K, S, B For ETCI connectors, all service classes are rated -55°C to +125°C max, regardless of the material or finish ordered
A
B
C
D
E
Refer to page 28 for more information
8. Deviation
2. Material and platings Shell material
PC Tail finish / Tinning (for Solder cup version, please use tin lead code)
Shell finish
Shell type compatibility
W
Olive Drab Cadmium Electroless Nickel
Shell style
Silver tin copper
Gold
F
Tin lead Silver tin
ZN
Black Zinc Nickel
Aluminum
PC-Tail only (TV and CTV Series)
Standard (Tinned PC-Tails)
F404 F404LF F404LFC Blank
ZR
Black Zinc Nickel CrVI free
TZ
Tin Zinc
TVP*00 TVP*02 Aluminum shell TVP*00 TV*07 Metal shell (for Tin Zinc Jam nut version, please consult us)
Equipped with clinch nuts
K S B
Passivated Nickel plated
F506G F506LF F506LFC F506
Stainless steel
Marine bronze*
-
*Copper aluminum alloy
Stand-off
F459 F459LF F459LFC F459H
3. Enhanced sealing ET Enhanced sealing EH
High performance Enhanced sealing
Reduced flange
F312 F312LF F312LFC F312H
4. Contact type - Non-removable contacts only CI PC Tail contacts - Standard length LI PC Tail contacts - Long length C Solder cup contacts
Reduced flange with safety castle nut
TV*07 Metal shell (for Tin Zinc Jam nut version, please consult us)
F311
F311LF F311LFC F311H
Stand-off Reduced flange
F059 F059LF F059LFC F059H
5. Contact arrangement Refer to page 18 for contact arrangements First number represents the shell size and second number is the contact arrangement
Stand-off Reduced flange with safety castle nut
F058 F058LF F058LFC F058H
For other deviations, please consult us.
All dimensions are given for information only and are in mm, except as otherwise specified │ *in mm: 1mm=0.03937 inch
Amphenol SOCAPEX
Due to technical modifications, all information provided is subject to change without prior notice Designed by Amphenol Socapex
91
Made with FlippingBook - Online catalogs