Oshino LEDs for signs October 2021 brochure

86

Connections A low - voltage power supply unit (PSU) is required and is shown in the diagram but not included with the

Need help with lighting a sign? Send a vector graphic pdf file of your sign or sign box to sales@oshino.co.uk subject line LED Wizard and we will do the rest.

dimmer module. Use a 12V d.c. or 24V d.c. constant voltage supply appropriate for dimmer module and LEDs.

Unsuitable for constant current PSUs and LEDs (e.g. 350mA, 700mA- Super Orbis LED) operation. Screw terminals are provided for a low - voltage input + positive and – negative (from PSU) and output + positive and — negative (to the LED array). Avoid short circuit. Connect output to load first. Spe- cial care should be taken to prevent short circuit when screwing down stranded wires. Rotate the knob right for highest brightness and left for lowest brightness and off.

Part nos. and descriptions LEDdim12 Oshino rotary dimmer switch module for 12V LED constant voltage array/strip up to 8A max LEDdim24 Oshino rotary dimmer switch module for 24V LED constant voltage array/strip up to 8A max

Warranty: 1 year | Dimensions in millimetres | Data subject to our Terms and Conditions and are liable to change without notice | E&OE

Tel 0115 964 1305 | sales@oshino.co.uk | www.oshino - lamps.co.uk

©OSHINO 5/2016

86

Made with FlippingBook - professional solution for displaying marketing and sales documents online