Cut the angled mortises in the handrail as described above. Then join the spindle and handrail.
TIP Beveled joints are also possible with spindles that are being installed on stair cases. Set the angle of the spindle on the domino fence and cut the mortise.
Set the mortise height to the center of the workpiece. Mark out the center point of the spindles on the top side of the workpiece. In this application (when only using scribe marks) align the center mark on the viewing window of the Domino with the scribe mark and cut the mortises.
TIP For workpieces where a secure support surface is possible for the joining machine, simply marking out the mortises or central axis of the spindles is sufficient (in this case you do not have to work with the trim stop).
54
Made with FlippingBook - Online catalogs