For flat joints, you need the following components from the DOMINO corner and flat connector system:
1. Cross anchors – here with additional extension shells. Prevents the cross anchor from drawing into soft materials (e.g. kitchen countertops). 2. Double-headed bolt – can be used with one or two domino clips. 3. DOMINO connector covers – clipped around double-headed or anchor bolts. Items included with double-headed or anchor bolts.
Flat connector with extension shells around the cross anchor – specially designed for materials such as MDF or particle board.
x + min. 12 min. 30
Mortise width Routing depth Routing height
C When working without extension shells around the cross anchor: x + min. 10 mm; min. 25 mm in total 40 mm When working with extension shells around the cross anchor: x + min. 12 mm; min. 30 mm in total 40 mm C*
Only suitable for joining wood or wood-like materials in furniture construction (no lightweight building materials!) The DOMINO connector is only a connecting element, not a load-bearing element. Observe minimum routing depths and edge distances! For indoor use only!
Made with FlippingBook - Online catalogs