DOMINO Joinery System booklet




Use the locating pins to select the mortise distance based on the individual workpiece. In this example, we are working with the two center pins, to create a mortise distance of 37 mm.

After cutting the first mortise (the pin is positioned at the edge of the workpiece in this case), the pin goes into the mortise, thus setting the next stop. Cut the mortise in the tight setting and all of the other in the loose setting.


Then join the workpiece parts together, gluing the dominos carefully in the process.

TIP For larger mortise distances, you can work with the cross stop (available as an accessory or included in the DF 500 and DF 700 set) both with the DF 500 and the DF 700.


Made with FlippingBook - Online catalogs