THE PREMIER SERIES — END PANEL OPTIONS
FCE — Flush Cabinet End
3 / 4 ” Plywood End Panel
Slight reveal between end panel and edge of frame .
Many wall, base, vanity, desk and tall cabinets are available with Flush Cabinet End option. A 3 ⁄ 4 ” plywood end panel is used to create a flush appearance with a slight reveal between the end panel and the edge of the face frame. When FCE option is selected end comes finished to match the door finish. Any cabinet over 60” high will use the Tall pricing. See the Modification Chart for option availability. To order, use the following codes with cabinet item code: Code Description Wall Base Tall FCEL Flush Cabinet End Left $85 $100 $200 FCER Flush Cabinet End Right $85 $100 $200 FCEB Flush Cabinet End Both $170 $200 $400 For Example: B33 FCEL (Left)
Face Frame
B33 FCER (Right) B33 FCEB (Both)
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • INS •
IME — Integrated Matching End
Inset Example
Overlay Example
Most Premier APC cabinets with doors or drawers can be ordered with Integrated Matching End Panels on the cabinet. When choosing this option you must select left, right or both for the desired side of application. For blind corner cabinets, this option is only available for the side opposite the blind. Integrated Matching Ends are available with Increase Depth and Reduce Depth options and will be notched for toe kick. Minimum Reduced Depth available with IME option is 9” for overlay door styles. Ends will have a full height door appearance for cabinets with door and drawer configurations. INSET: When choosing Integrated Matching Ends for appliance cabinets, note that there is a ½" thick panel added to the interior. This reduces the available area to cutout by ½" and may make it necessary to modify the width of the cabinet for the appliance cutout. Minimum depth is 12”.
W3030 IMELL
W3030 IMELL
Pricing IMELS IMERS IMELL IMERL IMELT IMERT
Per Side $470 List $470 List $770 List $770 List $1490 List $1490 List
To order, use the following codes with cabinet item code: IMELS — Integrated Matching End Left for wall, base, vanity & desk cabinets 27” high or under IMERS — Integrated Matching End Right for wall, base, vanity & desk cabinets 27” high under IMELL — Integrated Matching End Left for wall, base, vanity & desk cabinets over 27” high IMERL — Integrated Matching End Right for wall, base, vanity & desk cabinets over 27” high IMELT — Integrated Matching End Left for talls IMERT — Integrated Matching End Right for talls For Example: W3030 IMELL
DVB36 IMELL
DVB21 IMELL
Note: When choosing this option the following overlay door styles are excluded: Milan and Mitered door styles. Not available with Wide Top Rail or Wide Top Rail Reduced Opening modifications.
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
Inset Joinery
Overlay Joinery
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • INS •
MFE — Matching Finished End Cabinets will receive ½” thick matching cherry, maple, oak or hickory finished veneer plywood for specified ends. Cabinet face frame and end panel have standard reveal. Remember to face cabinet when specifing left or right. See the Modification Chart for option availability. To receive Matching Finished End:
B39 MFEL
Choose MFE option for left, right or both panels of the cabinet To order, use the following codes with cabinet item code:
Matching Finished 1 ⁄ 2 ” Plywood End
1 ⁄ 2 ” Standard End
Code MFEL MFER MFEB
Description
Wall $45 $45 $90
Base $65 $65 $130
Tall $125 $125 $250
Matching Finished End Left Matching Finished End Right Matching Finished End Both
Cabinet Front Face Frame
For Example: B39 MFEL
WIDTH
HEIGHT
DEPTH
Min.
Max.
Min.
Max.
Min.
Max.
Modification APC BO CC ES FCE FDBS FH FI FIMD FO ID IF IME MFE MD MH MW P PCE RD RTK TKA VTK WBR WCM WS WTR FOL/TOL • INS •
Premier–1–101
Made with FlippingBook Online document maker