THE PREMIER SERIES – MODIFICATIONS (continued) AC — Appliance Cutouts
Factory appliance cutouts are available on many cabinets that notate a Min/Max cutout area. This option allows you to specify the cutout opening measurements in 1/16” increments up to the maximum opening allowed for the cabinet. This option is not intended for Flush Inset Appliance Installation. See individual cabinet specifications for min/max cutout details. The cutout will be centered within the specified area and routed out which creates rounded corners in the cutout area. Inside edge of cut out will be unfinished. For Farmhouse Sink and Apron Front bases the cutout will be centered and will come down from top rail to specified height. Appliance drawer bases the cutout will start from bottom edge of top rail and cut up to specified height. This option is not available with Finished Interior Options or the following frame modifications: Modify Width, Extended Stile, Wide Stile & Wide Bottom Rail.
Codes: APPLIANCE CUTOUT TOP OPENING ACTOPW- Appliance cutout top width ACTOPH- Appliance cutout top height APPLIANCE CUTOUT MIDDLE OPENING ACMIDW- Appliance cutout middle width ACMIDH- Appliance cutout middle height APPLIANCE CUTOUT BOTTOM OPENING ACBOTW- Appliance cutout bottom width ACBOTH- Appliance cutout bottom height
* For each opening section chosen (top, middle, bottom) both width and height codes must be selected and populated. For pricing purposes each opening is considered a cutout even though two codes (width & height) will be used per opening.
1 st cutout opening add $200 List to cabinet 2 nd cutout opening add an additional $100 List 3 rd cutout opening add an additional $100 List
ACTOP - APPLIANCE CUTOUT TOP OPENING
DO3396
DESIGN NOTE: Single opening cabinets will always get ACTOP.
cutout centered
UMC3042
AFB36
ACTOPW ACTOPH
ACTOPW ACTOPH
ACTOPW ACTOPH
Applicable to following Cabinets: ACDDB, ACO, ADB, AFB, BMC, BMCD, BOC, DCMWD, DO, DOWD, FRB, FRDB, MCD, MO, MOC, MW, SO, SOD, TMC, TM CD, TMCDT, TMCT, TO, UMC, WDB
ACBOT - APPLIANCE CUTOUT BOTTOM OPENING
MO3396
MW3396
TO3396
DESIGN NOTE: ACBOT option only applies to cabinets with at least two openings.
ACBOTW ACBOTH
ACBOTW ACBOTH
ACBOTW ACBOTH
Applicable to following Cabinets: Microwave Oven Combination (MO), Microwave Warming Drawer (MW) & Triple Oven (TO)
Premier–1–106
Made with FlippingBook Online document maker