THE PREMIER SERIES – MODIFICATIONS (continued)
CUSTDOOR/CUSTBF — Custom Size Door and Blank Fronts
Panel Configurations
This option gives you the ability to order custom panel sizes based on specific parameters for each door style. You must specify the following information when ordering. Does not include installation hardware. Wellborn has the right to substitute MDF for center panels with paints and paints with glazes to insure better quality on larger panels. • Drill or No Drill (ND) - If Drill is selected, then you must specify Left (L) or Right (R) hinge. • Door Edge Profile (DE) or Square Edge Profile (SE) - Note: All edges will receive the specified edge treatment. • Height and Width - Sizes are allowed in 1 ⁄ 16 ” increments
8"-24"
8"-24"
- There are minimum and maximum widths allowed in order to retain the door profile. Minimum and maximum widths will vary based on individual door construction. • Door Type - FD Finished Door - DDF Decorative Door Frame - MD Mullion Door If DDF or MD is chosen, specify Glass Type: Codes Description
Price is in addition to sq. ft. door pricing Glass Max. Sizes
24 1 /
16 "-48"
24 1 /
16 "-48"
NG CG RG SG
No Glass Clear Glass Reeded Glass Satin Glass
No Charge $100 List $150 List $150 List $150 List $150 List $150 List $150 List $150 List
---
48" x 60" 32" x 42" 63" x 44" 24" x 72" 32" x 42" 24" x 72" 24" x 72" 30" x 72"
CSG SSG CAG CWG CBG
Clear Seedy Glass Super Seedy Glass Clear Antique Glass Clear Water Glass Clear Baroque Glass
24 1 /
16 "-48"
8"-24"
24 1 /
16 "-48"
8"-24"
Custom Door Parameters: For Custom Door orders, specify:
Custom Blank Front Parameters: For Custom Blank Front orders, specify: Edge Profile – DE/SE Height measurement Width measurement • Any blank fronts not listed are SLAB. • Minimum Size, Slab, H x L = 4 5 ⁄ 8 ” x 7” • Minimum Size, 5-piece, H x L = 4 5 ⁄ 8 ” x 8 5 ⁄ 8 ” • Maximum Size, H x L = 22” x 48” (except Harbour)
Door Hinge – L/R/ND Edge Pofile – DE/SE Door Type – FD/DDF/MD
Height measurement Width measurement Full Overlay Door Styles (Cope & Tenon) Width: • Minimum = 8”
- Bishop & Trestle doors less than 10 ⅛ ” will have reduced width stiles. - Beaumont, Breckenridge, Collins, Marlow, Ridgebrook & Wyatt doors less than 9 15 ⁄ 16 ” will have reduced width stiles. • Maximum = 24” (single panel), 48” (horizontal double panel) - Doors greater than 24” wide are not available over 48” high. • Maximum = 48” (single panel); 72” (vertical double panel) - Doors greater than 24” wide are not available over 48” high. Mitered/Slab Door Styles (all are single panel) Width: • Minimum = 8” • Maximum = 24” Height: •Minimum = 8” • Maximum = 72” Traditional Overlay Door Styles (Cope and Tenon) Width: • Minimum = 7 3 ⁄ 4 ” • Maximum = 21 1 ⁄ 2 ” (single panel), 48” (horizontal double panel) - Doors greater than 21 1 ⁄ 2 ” wide are not available over 48” high. Height: •Minimum = 7 3 ⁄ 4 ” • Maximum = 48” (single panel); 72” (vertical double panel) - Doors greater than 21 1 ⁄ 2 ” wide are not available over 48” high. Note: All cope and tenon and MDF door styles over 48” Height: •Minimum = 8”
Typical Number of Hinges by Door Height
*TOL & FOL > 12” = 3 7 ⁄ 8 *TOL & FOL </= 12” = 2 1 ⁄ 2 *INS > 15” = 3 7 ⁄ 8 *INS </= 15” = 2 1 ⁄ 2
Refer to individual Door Style pages for size limitations
high will have a mid-rail, and if over 24” wide will have a center stile. Mitered and slab doors will remain a one-piece panel.
To Calculate the Price of Your Panel: The custom panels are priced per square foot. There is a minimum charge of 1 sq. ft. for blank fronts and 1½ sq. ft. for doors. • Custom Panels are $120 List per sq. ft. EXAMPLE: Panel Size
36” x 30” = 1,080 ÷ 144 = 7.5 sq. ft. For Custom Door (or Blank Fronts): 7.5 sq. ft. x $120 List = $900
Premier–1–115
Made with FlippingBook Online document maker